Electricity & Magnetism
Electricity and magnetism equipment enables hands-on exploration of electrical circuits, electromagnetic fields, and related phenomena.Built for classroom and laboratory use, these tools promote safe and interactive learning experiences.Ideal for Australian science programs, this range enhances understanding of core physics principles.
Pith Ball Electroscope for Electrostatics Demonstration
- Pith ball type electroscope for physics education
- Demonstrates basic principles of electrostatics
- Helps show charge attraction and repulsion behaviour
- Suitable for classroom demonstrations and student practicals
- Supports teaching of static charge and electrical interaction
- Useful with suitable electrostatic rods or charge sources
- Intended for supervised educational laboratory use
AUD 6.90 (Ex GST)
PSSC Small Current Balance Experiment Kit, Solenoid Not Included
- Platform attaches to IEC air cored solenoid end cheek, direct-fit mount for balance experiments.
- Slim blade with single-turn conductor, balanced on sensitive pivots between two platform support rods.
- Current in solenoid and conductor produces magnetic interaction, blade deflects, shows force on conductor.
- Add small weights to restore balance, required mass quantifies force for analysis during practicals.
- Demonstrates motor principle, force on current-carrying conductor inside magnetic field, foundational electricity and magnetism.
AUD 83.50 (Ex GST)
Rare Earth Neodymium Magnet, N35, 15 × 10 mm
- Rare earth neodymium magnet for laboratory and educational experiments
- Strong permanent magnet for magnetic force demonstrations
- Diameter listed as 15 mm
- Thickness listed as 10 mm
- Grade listed as N35
- Maximum working temperature listed as 80°C
- Suitable for magnetism, attraction and repulsion activities
- Useful for physics, STEM and general science demonstrations
- Compact format for practical classroom experiments
- Strong magnets can pinch skin during handling
- Keep away from sensitive electronics, magnetic cards and medical implants
- Use under appropriate laboratory or educational supervision
AUD 10.90 (Ex GST)
Selectavolt Regulated DC Power Supply, 1.5 / 3 / 6 V
- Selectavolt regulated DC power supply for laboratory and education use
- Selectable output voltages of 1.5 V, 3 V and 6 V DC
- Output current listed as 2 A continuous or 3 A intermittent
- Smooth regulated DC output designed to simulate dry cell batteries
- Rear panel slide switch for voltage selection
- No AC output provided
- Output via 4 mm spin-free IEC terminals
- Rear 4 mm sockets permit trickle charging of compatible NiCd cells
- Suitable for school electricity, electronics and low-voltage circuit experiments
- Use under appropriate teacher or laboratory supervision
AUD 325.90 (Ex GST)
Simple Clinometer (Inclinometer) for Angle Measurement
- Simple inclinometer for measuring incline or decline angles
- Also known as a clinometer
- IEC inclinometer as listed
- Self-contained device for angle measurement
- Viewing tube helps align the object in the sight
- Button releases the swinging pendulum for measurement
- Pendulum is graduated in degrees as listed
- Button clamps the pendulum after stabilisation
- Useful for slope, height and angle demonstrations
- Suitable for school and university science activities
- Confirm measurement method and sighting procedure before use
- Use under appropriate laboratory or educational supervision
AUD 68.50 (Ex GST)
Single Contact Key with Lock Down Contact
- Single contact key for electrical circuit demonstrations
- Built with two binding posts for circuit connection
- Large button opens and closes the circuit
- Button is made from insulating material as listed
- Lock down contact supports maintained circuit connection when required
- Mounted on a 50 × 110 mm black acrylic base
- Suitable for school, university and teaching laboratory use
- Useful for basic electricity and electronics demonstrations
- Can be used to simulate Morse code signalling
- Confirm circuit voltage, current and experiment method before use
- Use only with suitable low-voltage educational circuits
- Use under appropriate laboratory or educational supervision
AUD 14.90 (Ex GST)
Single Range Student Meters For Circuit
- Single range student meters for classroom circuit current measurement
- Designed to reduce scale confusion during practical electricity lessons
- Available across DC microamp, DC milliamp, AC amp and DC amp ranges
- Suitable for basic circuit work, current flow and component investigations
- Economical and durable design stated for repeated student handling
- Large viewing window supports clearer reading during group demonstrations
- Use within the stated range under appropriate supervision
From AUD 43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Single Range Student Volt Meters, AC and DC Voltage
- Single range student volt meters for classroom voltage measurement
- Available for AC and DC voltage experiments in teaching laboratories
- Designed to simplify reading during circuit analysis activities
- Range options include AC 0 to 25 V and DC 0 to 3 V, 0 to 10 V and 0 to 25 V
- 0 to 25 V models list scale increments of 0, 5, 10, 15, 20 and 25
- Accuracy is stated as approximately 2.0 to 2.5% for listed 0 to 25 V models
- Use within the stated voltage range under appropriate supervision
From AUD 43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Student Plastic Geoboard with Rubber Bands Included
- Plastic geoboard with pins, uses coloured elastic bands to build and compare geometric shapes by stretching between points.
- Rectangular pin grid side supports angular shapes, squares, rectangles, triangles, parallelograms, polygons, trapeziums.
- Circular pin pattern side supports circle geometry, chords, segments, sectors, quadrants, and related definitions.
- Hands-on tool for exploring area relationships, shape properties, and geometry vocabulary through construction.
- Suitable for student practice, quick shape creation, visual comparison, and repeated classroom activities.
AUD 18.90 (Ex GST)
Student Triple Range DC Ammeter, Classroom Current Meter
- Triple range DC ammeter for classroom current measurement
- Measures current across three selectable ranges in one instrument
- Available in 0 to 100 mA / 0 to 500 mA / 0 to 1 A configuration
- Available in 0 to 50 mA / 0 to 500 mA / 0 to 5 A configuration
- Brass threaded binding post terminals suit 4 mm banana plugs
- External zero adjust supports pointer setting before measurement
- Economical and durable design stated for repeated student use
From AUD 43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Student Triple Range DC Voltmeter, Physics Lab Voltage Teaching Meter
- Triple range student DC voltmeters for classroom voltage measurement
- Three selectable voltage ranges support varied circuit experiments
- Suitable for circuit analysis, Ohm’s Law and DC polarity teaching
- Accuracy is stated as ±2.5% of full scale
- Dimensions are stated as 133 × 97 × 100 mm
- Weight is stated as 0.3 kg for practical bench and classroom use
- Use within the selected voltage range under appropriate supervision
From AUD 43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Superconductivity Kit, Complete Set
- Complete kit for classroom superconductivity demonstrations
- Includes petri dish, magnet, superconductivity disc, forceps and instruction book
- Spare superconductivity disc option available for replacement use
- Spare magnet option supports continued kit maintenance
- Disc size is 29 mm diameter × 2.9 mm thick
- Disc lifespan depends on correct handling, drying and humidity control
- Suitable for supervised classroom and laboratory demonstration use
From AUD 18.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Timers and Counters
- Microprocessor controlled timers for physics labs, fast timing with auto ranging down to 0.1 ms resolution
- Memory capacity up to 20 readings, functions include add, average, purge and clear depending on model
- Timing modes include start stop, photogate, period and pendulum, supports common mechanics experiments
- Power options include 3 x AA battery, 12V AC/DC plug pack, and 240V AC mains, with LED or LCD displays
- Advanced models add counting and frequency modes, photogate power, dual gate timing, free fall solenoid control, and Geiger counting with adjustable tube high voltage plus audio and oscilloscope outputs
From AUD 328.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Transformer 240V AC to 12V AC 12A ,Triple Output Terminals
- 220/240 V to 12 V AC transformer, supplies three separate low-voltage circuits from one mains unit.
- Total load up to 12 A across all outputs, suitable for multiple 12 V AC classroom devices.
- Three output pairs on 4 mm spin-free IEC terminals, easy wiring to three independent circuits.
- Designed to run up to three Hodson light boxes or similar 12 V AC equipment as specified.
- Fixed mains cable, non-removable lead, simple plug-in operation for lab benches and classrooms.
AUD 267.90 (Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
- Three-in-one teaching instrument for electronics experiments
- Includes regulated ±1.2 to 20 V DC power supply
- DC power supply output is stated as 250 mA
- Signal generator frequency range is stated as 0.1 Hz to 100 kHz
- High power signal generator output is stated as 0.5 A
- Includes audio amplifier with high and low sensitivity inputs
- Provides oscilloscope output and internal speaker
AUD 1,023.90 (Ex GST)
U-Core Electromagnet with Armature, 12 V DC
- Simple U-core electromagnet for physics and electricity demonstrations
- Includes two coils with 600 turns each
- Coils are wound on steel centres to form a magnetic yoke
- Supplied with steel armature plate fitted with hook
- Coils connect to 2 × 4 mm spin-free IEC terminals
- Holding force increases as current through the series coils increases
- Can be used with AC or DC to demonstrate operating differences
- Suitable for electromagnetism, magnetic force and current investigations
- Designed for laboratory or educational use only
- Use under appropriate teacher or laboratory supervision
AUD 97.50 (Ex GST)
U-Shaped Photogate Sensor with Support Rod, General Purpose
- Red LED beam-break detection, universal photogate sensor for motion timing tasks.
- 12 V AC or DC LED power requirement, compatible with IEC electronic timers.
- Air track adaptor option, gate clicks to track edge, gliders pass through cleanly.
- Genius timer cable system, one lead carries LED power and signal return together.
- Two-gate capability on Genius timer, supports dual-point timing and pass-through measurements.
AUD 156.90 (Ex GST)
Universal Alloy Bench Clamp for Rods up to 13 mm Diameter
- IEC universal bench clamp for routine lab setups, stable mounting point on bench edges.
- Fits benches up to 40 mm thick, clamps firmly for repeatable student practical use.
- Holds rods up to 13 mm diameter, supports vertical or horizontal rod orientation.
- Can carry a pulley on a rod, creating a simple bench-mounted pulley arrangement.
- Useful for mechanics demonstrations and general bench rigging requiring a secure rod support.
AUD 34.90 (Ex GST)
Vacuum Surface Plate for Bell Jar and Vacuum Experiments
- Vacuum surface plate for bell jar demonstrations
- IEC surface plate as listed
- Flat plate design for bench-top use
- Diameter listed as 200 mm
- Includes 3 small pads designed to rest on the work bench
- Designed to carry and seal to a bell jar or similar vessel
- Useful for creating a vacuum demonstration setup
- Suitable for bell-in-vacuum experiments
- Practical accessory for school and university physics laboratories
- Confirm bell jar size and sealing compatibility before use
- Vacuum pump and bell jar are not included unless specified
- Use under appropriate laboratory or educational supervision
AUD 272.50 (Ex GST)
Variable AC/DC Power Supply, 0 to 25 V, Digital Voltmeters
- Variable AC/DC power supply for general laboratory use
- Smooth voltage adjustment from 0 to 25 V
- Provides both AC and DC output options
- Current rating listed as 10/6 A, depending on output mode
- Dual digital voltmeters monitor AC and DC output voltages simultaneously
- Large illuminated digits support clear voltage reading
- Separate 4 mm socket head spin-free terminals for AC and DC outputs
- Robust and compact design for teaching and laboratory benches
- Suitable for physics, electrical circuits and low-voltage experiments
- Use under appropriate teacher or laboratory supervision
AUD 1,040.50 (Ex GST)
Variable High Voltage Power Supply, 0 to 500 V DC / 50 mA
- Variable high voltage power supply for laboratory and education use
- High voltage DC output listed as 0 to 500 V DC
- High voltage AC output listed as 0 to 300 V AC
- Maximum high voltage output current listed as 50 mA
- Includes digital meter for output monitoring
- Low voltage outputs listed as 2 × 6.3 V AC at 4 A
- 6.3 V AC outputs are normally used for electron tube heater applications
- Electronic overload trip protection
- Overload is reset by turning off the high voltage output
- Suitable for supervised physics, electronics and electron tube demonstrations
AUD 742.50 (Ex GST)
Variable-Speed Air Pump for Air Track or Air Table, 240 V AC Powe
- Mains-operated variable speed blower for air tracks and air tables, adjustable airflow to suit experiment lift requirements.
- Lower speed operation reduces noise, supports quieter classroom demonstrations and controlled airflow settings.
- Upper-face intake below carry handle reduces floor debris ingestion during routine lab and school use.
- Dual strainer system, one prevents particles entering intake, one prevents debris entering outlet orifice.
- Supplied with flexible hose for straightforward connection to linear air track or air table systems.
AUD 409.90 (Ex GST)
Water Turbine Hydro-Electric Power Demo Spare Belt
- Replacement belt for water turbine hydro-electric power demo
- Suitable for LC-80-EM1639-01 demonstration apparatus
- Supports continued operation of classroom hydro-electric experiments
- Approximate belt diameter is 70 mm
- Spare belt only, main demonstration unit not included
- Useful for routine maintenance or belt replacement
- For laboratory or educational use under appropriate supervision
AUD 11.50 (Ex GST)
Water Turbine Hydro-Electric Power Educational Model
- Demonstrates hydro-electric power generation in classroom experiments
- Shows energy conversion from moving water to electrical output
- Suitable for renewable energy and sustainability lessons
- Helps teachers explain turbine-driven electricity generation
- Supports hands-on physics and environmental science activities
- Useful for group demonstrations and student observation
- For laboratory or educational use under appropriate supervision
AUD 216.90 (Ex GST)
Wimshurst Machine for Electrostatic Charge
- Demonstrates electrostatic charge generation, storage and visible discharge for physics education.
- Hand crank rotates twin plates in opposite directions to build static electricity.
- Leyden jar capacitors store charge before spark discharge between terminals.
- Mounted on a wooden base with rubber feet for stable classroom use.
- Compact demonstration size with 300 × 180 mm base and 300 mm height.
- Suitable for supervised lessons on electrostatics, induction, capacitance and electrical discharge, as students observe charge separation and transfer safely during guided classroom experiments.
AUD 174.50 (Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
- Replacement belts for compatible Wimshurst machine demonstrations
- Suitable for LC-80-EM1641-01 Wimshurst machine
- Used to support plate rotation during electrostatics experiments
- Approximate belt circumference is 45 cm
- Suitable for approximately 140 mm diameter belt path
- Available as spare belt only or spare belt pair
- For laboratory or educational use under appropriate supervision
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wind Energy Generator Kit, Classroom Electricity Generation Demonstration Type
- Designed for renewable energy teaching, helping demonstrate how wind motion can be converted into useful electrical output
- Operates on low wind, making it practical for classroom experiments without requiring strong outdoor airflow conditions
- Can be driven by a table fan, supporting simple indoor demonstration of wind-powered generation principles
- Produces current for a motor or lamp, allowing visible observation of energy transfer in action
- Useful for science lessons covering sustainability, alternative energy, and basic electricity generation concepts
AUD 216.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Electricity and Magnetism is a fundamental area of physics that explores how electric charges interact, how electric currents flow, and how magnetic fields are generated and behave. Laboratory experiments in electricity and magnetism help students and researchers understand key concepts such as electric circuits, electromagnetic induction, resistance, capacitance, magnetic fields, and the relationship between electricity and magnetism. These principles form the scientific foundation for modern technologies including electronics, power systems, communication devices, and electromagnetic instruments.
In teaching laboratories and research environments, electricity and magnetism apparatus is used to demonstrate practical electrical behaviour through controlled experiments. Typical equipment may include power supplies, galvanometers, ammeters, voltmeters, resistors, coils, electromagnets, magnetic field demonstrators, and circuit experiment kits. These tools allow students to investigate electrical conductivity, Ohm’s law, magnetic field patterns, electromagnetic induction, and other important phenomena in a clear and measurable way.
Where electrical measurement equipment is used in laboratories, the international safety standard for electrical equipment used in measurement, control, and laboratory environments. In cases where laboratory glass components are used within electrical experiments, relevant material standards may include ISO 3585 for BORO 3.3 borosilicate glass properties and ASTM E438 for laboratory glass quality. For manufacturers and suppliers of laboratory equipment, ISO 9001 quality management systems are commonly recognised to ensure consistent product quality and reliability.
Electricity and magnetism experiments are essential for physics education because they allow students to directly observe and measure invisible forces and fields. Practical demonstrations of electromagnetic principles help build deeper understanding of current flow, magnetic interactions, energy transfer, and electrical measurement techniques.
At LabChoice Australia, we supply dependable electricity and magnetism laboratory apparatus suitable for school science laboratories, university physics teaching environments, and demonstration setups. Our range is selected to support clear visual learning, repeatable experiments, and reliable classroom use, helping educators demonstrate fundamental electromagnetic principles with confidence.