Motor / Generator Set with Belt Drive for Energy Conversion Experiments
AUD 90.90(Ex GST)
AUD 90.90(Ex GST)
- Motor / generator set for laboratory and educational use
- IEC electric motor generator set as listed
- Consists of 2 medium-sized DC electric motors
- Motors have permanent magnet fields as listed
- Coupled by pulleys and a small belt
- One motor runs as a DC motor while the other acts as a DC generator
- Supports efficiency comparison between input and output electrical energy
- Suitable for voltages around 6 V DC as listed
- Maximum voltage listed as 16 V
- Belt can be removed so either motor may be used separately
- Keep fingers and loose items clear of moving pulleys and belt
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Motor / Generator Set, Belt Drive, also known as a DC motor generator demonstration set, is designed for teaching electrical energy conversion, mechanical coupling and generator action. The IEC set consists of 2 medium-sized DC electric motors with permanent magnet fields. The motors are coupled together by pulleys and a small belt, allowing one motor to drive the other during demonstrations. In a typical setup, one unit is powered as a DC motor, while the second unit behaves as a DC generator. This allows students to observe how mechanical rotation can be converted back into electrical output.
The arrangement can be used to compare the electrical energy supplied to the motor with the electrical energy drawn from the generator, supporting practical discussion of efficiency, losses and energy transfer. The set is listed as suitable for voltages around 6 V DC, with a maximum voltage listed as 16 V. Users should confirm the correct classroom power supply and operating voltage before use. With the belt removed, either motor can be used for other compatible mechanical purposes, allowing broader use in physics and electricity demonstrations.
Users should confirm complete kit contents, pulley alignment, belt condition, voltage limit, load connection, meter setup and experiment procedure before ordering or use. Use only with compatible low-voltage DC classroom power supplies. Do not connect directly to mains electricity or unsuitable external power sources. Keep fingers, hair, loose clothing, cords and small objects away from moving pulleys, belts and rotating motor shafts during operation.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected motor / generator set with belt drive only. Power supply, leads, meters, lamps, loads, worksheets, clamps and additional electricity accessories are not included unless specified separately.
LabChoice Australia supplies Motor / Generator Sets and physics teaching apparatus for school science laboratories, university teaching laboratories and educational facilities requiring practical demonstrations of DC motors, generators and energy conversion.
Conductivity Meter Kit EC910 Benchtop with GLP Data Output, 0 to 200 mS/cm
AUD 1,025.00(Ex GST)
pH Meter Kit with ORP, Ion and Temperature, Colour Touch Screen
AUD 1,975.00(Ex GST)
Glass Pasteur Pipettes, BORO 3.3 Pack of 250
From AUD 37.50 (Ex GST)
Large Pulley with Universal Clamp, 70 mm
AUD 19.00(Ex GST)
Polypropylene 2-Way Stopcock with PTFE Plug, for 6 to 9 mm Tubing
AUD 18.90(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 5 ML – 10 Pcs/Box
AUD 20.00(Ex GST)
Decision Reaction Timer Device for Response Time Testing
AUD 253.90(Ex GST)
LCD Digital Thermo Mix with Heating, Cooling, Mixing and Choice of 1 Heating Block
AUD 2,857.00(Ex GST)
You May Also Need
Adjustable Aepinus Air Capacitor for Electrical Experiments
AUD 323.50(Ex GST)
Battery Holders for D Cells with 4 mm Terminals
From AUD 11.50 (Ex GST)
BeeSpi V Photogate, Battery Operated Speed Measurement Type
AUD 143.50(Ex GST)
Circuit Board Main Board with 5 mm Metal Pins
AUD 34.90(Ex GST)
Electric Clinostat on Stand for Studying Plant Growth and Gravitropism
AUD 219.50(Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From AUD 46.50 (Ex GST)
Electrophorus metal with Handle and Plate
From AUD 52.50 (Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From AUD 9.50 (Ex GST)
Genecon Due 12 V and Genecon V3 3 V DC Hand Generators
From AUD 72.50 (Ex GST)
Mass of Electron Apparatus with Tube, Without Solenoid
AUD 232.90(Ex GST)
Small Motor and Generator Kit with Pulley, ASEP
AUD 72.50(Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
AUD 1,023.90(Ex GST)
U-Core Electromagnet with Armature, 12 V DC
AUD 97.50(Ex GST)
Universal Bench Clamp, Alloy, for Laboratory Rods
AUD 34.90(Ex GST)
Vacuum Surface Plate for Bell Jar and Vacuum Experiments
AUD 272.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
Electrostatic Rods for Static Electricity Experiments
From AUD 6.40 (Ex GST)
Graphite Carbon Rods for Electrodes and Experiments
From AUD 7.20 (Ex GST)
Tapered Cork Stoppers, Agglomerated Cork for Bottles and Laboratory Vials, Pack of 25
From AUD 6.50 (Ex GST)
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab