Vacuum Surface Plate for Bell Jar and Vacuum Experiments
AUD 272.50(Ex GST)
AUD 272.50(Ex GST)
- Vacuum surface plate for bell jar demonstrations
- IEC surface plate as listed
- Flat plate design for bench-top use
- Diameter listed as 200 mm
- Includes 3 small pads designed to rest on the work bench
- Designed to carry and seal to a bell jar or similar vessel
- Useful for creating a vacuum demonstration setup
- Suitable for bell-in-vacuum experiments
- Practical accessory for school and university physics laboratories
- Confirm bell jar size and sealing compatibility before use
- Vacuum pump and bell jar are not included unless specified
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Vacuum Surface Plate, 200 mm Diameter, also known as a vacuum plate or bell jar base plate, is designed for use with compatible bell jars or similar vessels during vacuum demonstrations. The IEC surface plate is a flat plate with 3 small pads designed to rest on the work bench, helping support the plate during classroom and laboratory demonstrations. The plate is designed to carry and seal to a compatible bell jar or similar vessel, allowing a vacuum to be created for approved experiments. This surface plate is often used for demonstrating a bell in a vacuum, where students observe how sound transmission changes as air is removed from the vessel.
It is also suitable for other supervised vacuum demonstrations where a compatible bell jar, vacuum source and safe laboratory procedure are used. The listed diameter is 200 mm, so users should confirm bell jar diameter, sealing surface, gasket requirement, vacuum level, pump connection and experiment setup before ordering or use. Vacuum apparatus should be inspected before use. Do not use with cracked glassware, damaged sealing surfaces, unsuitable vessels or excessive vacuum levels outside the approved apparatus rating.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the vacuum surface plate only. Bell jar, vacuum pump, tubing, gasket, bell apparatus, pressure gauge, clamps, PPE and additional vacuum accessories are not included unless specified separately.
LabChoice Australia supplies Vacuum Surface Plates and physics teaching accessories for school science laboratories, university teaching laboratories and educational facilities requiring practical equipment for vacuum and bell jar demonstrations.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Simple Planck’s Constant Apparatus with LEDs
AUD 155.90(Ex GST)
Adjustable Constant Current DC Power Supply, 0 to 2 A / 12 V
AUD 435.90(Ex GST)
Boyle’s Law High Pressure Spare Glass Tubes
From AUD 34.90 (Ex GST)
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
From AUD 0.95 (Ex GST)
pH Electrode Replacement Soil Spear for GroStar® GS2-E
AUD 345.00(Ex GST)
Single Edge Razor Blades, Pack of 100
AUD 27.50(Ex GST)
Brass Slotted Weight Sets for IEC Weight Carriers
From AUD 14.90 (Ex GST)
General Laboratory Safety Chart, 75 × 100 cm
AUD 48.90(Ex GST)
LED Transference Decolorizing Shaker, 7° Tilt Angle, 10 to 80 rpm
AUD 286.50(Ex GST)
You May Also Need
5-Way Distribution Board with 5 Pair Terminals
AUD 129.50(Ex GST)
AC Theory Electricity Kit with Signal Generator
AUD 1,262.90(Ex GST)
Air-Cored Copper Solenoid for Magnetic Field Experiments
AUD 165.90(Ex GST)
ASEP Circuits Kit with Wire Card, Lamps and Clips
AUD 64.90(Ex GST)
Conductivity Electrodes, Stainless Steel Type
From AUD 49.90 (Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From AUD 656.50 (Ex GST)
Electric Clinostat on Stand for Studying Plant Growth and Gravitropism
AUD 219.50(Ex GST)
Electromagnetic Induction Apparatus with Rod Magnet
AUD 319.90(Ex GST)
Key Press Contact Switch, Silver-Plated Contact Points
AUD 28.90(Ex GST)
Laboratory Electroscope in Metal Housing
From AUD 85.90 (Ex GST)
Motor / Generator Set with Belt Drive for Energy Conversion Experiments
AUD 90.90(Ex GST)
Small Motor and Generator Kit with Pulley, ASEP
AUD 72.50(Ex GST)
Spark Generator for Air Tracks and Tables Motion Experiments
AUD 911.50(Ex GST)
U-Core Electromagnet with Armature, 12 V DC
AUD 97.50(Ex GST)
Variable Speed Air Source for Air Table and Air Track
AUD 409.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
Silicone Beaker Covers for Low Form Beakers
From AUD 2.20 (Ex GST)
Conical Measure, Graduated Polypropylene (PP)
From AUD 1.00 (Ex GST)
Baumé Hydrometer Brannan for Liquid Density Measurement, 305 mm
AUD 78.90(Ex GST)
TOP RATED PRODUCTS
Silicone Beaker Covers for Low Form Beakers
From AUD 2.20 (Ex GST)
Conical Measure, Graduated Polypropylene (PP)
From AUD 1.00 (Ex GST)
Baumé Hydrometer Brannan for Liquid Density Measurement, 305 mm
AUD 78.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab