Electricity & Magnetism
Electricity and magnetism equipment enables hands-on exploration of electrical circuits, electromagnetic fields, and related phenomena.Built for classroom and laboratory use, these tools promote safe and interactive learning experiences.Ideal for Australian science programs, this range enhances understanding of core physics principles.
11-Step Capacitor Set, 100 pF to 0.47 µF, 350 V AC Rated
- 11 fixed capacitor values, no switches, step selection by patching circuits with 4 mm banana sockets.
- Values from 100 pF to 0.22 µF cover pF, nF, µF ranges for filters, timing, resonance, and reactance practicals.
- Rugged metal housing supports classroom and workshop handling, keeps components protected and organised.
- Individual sockets allow easy series and parallel combinations to create custom capacitance totals for experiments.
- Rated to 350 V AC or DC, suitable for higher-voltage training circuits within specified limits.
AUD 184.50 (Ex GST)
16 V Belt-Driven Motor/Generator Set
- Two DC motors, permanent magnet fields, belt-coupled via pulleys
- One runs as motor, one as generator, direct energy conversion demo
- Efficiency measured by comparing motor input and generator output energy
- Typical operation around 6 V DC, maximum 16 V specified
- Belt removable, motors usable separately for mechanical experiments
AUD 90.90 (Ex GST)
5-Way Distribution Board with 5 Pair Terminals
- 5-way distribution board for laboratory electrical demonstrations
- IEC distribution board as listed
- Converts one power supply or signal generator output into 5 outlets
- Includes 5 pairs of sockets / terminals as listed
- One pair of input cables connects to the source device during use
- Useful for student group circuit demonstrations
- Suitable for power supply and signal generator distribution
- Practical accessory for physics and electronics teaching laboratories
- Helps multiple students access the same source output
- Confirm voltage, current and connector compatibility before use
- Do not use with mains electricity unless specifically rated
- Use under appropriate laboratory or educational supervision
AUD 129.50 (Ex GST)
9 V Battery Power Supply in Case with Banana Sockets
- 9 V battery power supply for classroom circuit experiments
- Supplied in a protective case format
- Banana sockets support connection to compatible laboratory leads
- Suitable for low-voltage DC circuit demonstrations
- Useful for school electricity, electronics and physics practicals
- Practical for lamps, buzzers, small motors and simple circuit components where compatible
- Compact format supports student bench use
- Helps provide a simple portable power source without a bench power supply
- Confirm battery inclusion, polarity marking and lead compatibility before use
- Use under appropriate teacher or laboratory supervision
AUD 26.50 (Ex GST)
AC Circuits Practical Kit with Inductors, Capacitors and Resistors
- Ventilated enclosure with heavy-duty resistors, chokes and capacitors for hands-on AC circuit training.
- Rated for circuits up to 240 V AC, suitable for trade school mains-theory experiments.
- All components rated 2 A, supports repeatable, controlled measurements under load during practical classes.
- Front-panel 4 mm terminals enable fast interconnection and reconfiguration of R, L and C networks.
- Supports exercises on reactance, impedance and power factor, plus motor theory and electrical efficiency.
AUD 1,605.50 (Ex GST)
AC Circuits Theory Kit with Inductor, Capacitors and Signal Generator Set
- University and trade kit for AC theory: inductance, reactance, impedance, resonance, power factor, losses.
- Very accurate digital signal generator, sine and square outputs for controlled frequency and waveform demonstrations.
- Includes 2 × 2 H inductors, capacitors and resistor for building R, L, C and RLC networks.
- Analogue and digital meters supplied for measuring voltage and current, including lead and lag relationships.
- Instruction and experiment sheets included, components stored in sponge protection within a strong carry case.
AUD 1,262.90 (Ex GST)
Adjustable Aepinus Air Capacitor for Electrical Experiments
- Aepinus air capacitor for physics and electrical demonstrations
- Adjustable capacitance range listed as 2–250 pF in title
- Uses two sets of square plates as listed
- Plates are magnetically held parallel and true in position
- Adjustable plate separation from 1 mm to 120 mm as listed
- 4 mm sockets provided for electrical connection
- Circuit protected against accidental plate contact as listed
- Friction slider blocks allow quick plate removal and size changes
- Sturdy feet support stable bench-top use
- Useful for electrostatics and capacitance demonstrations
- Plate size and capacitance range should be confirmed before final upload
- Use under appropriate laboratory or educational supervision
AUD 323.50 (Ex GST)
Adjustable Constant Current DC Power Supply, 0 to 2 A / 12 V
- Adjustable constant current DC power supply for laboratory and education use
- Output range listed as 0 to 2 A
- Maximum output voltage listed as 12 V DC
- Designed to maintain a preset current through a changing load
- Voltage automatically adjusts to support the selected current
- Useful for solenoid coil heating and resistance change demonstrations
- Suitable for electroplating studies and controlled-current experiments
- 4 mm socket head terminals support clamped wires and standard 4 mm banana plugs
- Suitable for physics, electrical circuits and electrochemistry teaching
- Use under appropriate teacher or laboratory supervision
AUD 435.90 (Ex GST)
Air Cored Inductance Coils, Laboratory Inductor Type
- Air cored inductance coils for laboratory and classroom electrical demonstrations
- Matched to the coil format used with small demonstration transformer and induction kit setups
- Available inductance values include 5 mH, 10 mH, 15 mH and 20 mH
- Number of turns is adjusted to provide the stated inductance value for each coil
- Two 4 mm banana sockets are integrated into the coil body for quick connections
- Consistent coil design supports repeatable inductance and electromagnetic induction demonstrations
- Each coil is supplied as a single component, with the required mH value selected by the user
From AUD 56.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track and Air Table Spark Generator, 240 V AC Mains
- Spark recording timer for linear air tracks, measures motion without photogates, permanent tape record.
- Two spark outputs, rate adjustable 2.5–50 sparks per second for controlled timing intervals.
- Electrode on gliders sparks across gap to tape, leaving black dots as position markers.
- Dot spacing enables velocity and acceleration calculations using measured distances and known spark rate.
- High-voltage cable pair supplied for connection to air track spark rails and recording setup.
AUD 911.50 (Ex GST)
Air Track Spark Generator Cables, Precision Connection Set
- Cable accessory set for air track spark generator and spark recording systems
- Remote control cable includes press button for spark generator start and stop control
- EHV cable pair connects spark tracks to the spark generator
- Earth cable includes 4 mm banana plugs for connection between air track and spark generator
- Supports reliable connection, controlled operation and routine physics demonstration setup
- Replacement cable options help maintain spark recording system performance
- Compatibility with existing spark generator sockets and track hardware should be confirmed before use
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air-Cored Solenoid Coil, 700 Turns, 5 A Copper Wire (PSSC)
- Moulded plastic bobbin air-core solenoid for known magnetic field strength in teaching and calibration setups.
- Use over magic eye tube for mass of electron experiment, also IEC current balance apparatus construction.
- For IEC hall effect apparatus calibration when a repeatable magnetic field of known strength is required.
- 700 turns copper wire winding, carries about 5 A maximum current for strong, stable field generation.
- 150 mm length, 37 mm bore, inward 4 mm socket terminals allow flat bench placement at ends.
AUD 165.90 (Ex GST)
Alnico Bar Magnet Pairs with Keepers, Permanent Magnet Demonstration Range
- Alnico bar magnet pairs supplied with keepers, supports magnetism demonstrations and field pattern exploration in physics practical lessons
- Three sizes listed 50 mm, 75 mm and 100 mm lengths with consistent 12 x 8 mm cross section, choose length to suit bench space and experiment scale
- Permanent magnets described with distinct north and south poles, supports pole interaction activities and attraction or repulsion demonstrations
- Useful for studying magnetic field behaviour with filings, compasses and magnetic materials, supports foundational concepts in electricity and magnetism topics
- Keepers supplied help protect and store magnet pairs, maintain magnets together between lessons and use under appropriate supervision to avoid pinching and impact damage
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Alnico Cylinder Magnets for Magnetism and Induction Experiments
- Alnico cylindrical magnets for physics demonstrations, supports magnetic field, induction and electromagnetism experiments in classroom and lab settings
- Two sizes listed 30 x 10 mm and 100 x 10 mm, choose length to match experiment scale, mounting space and desired interaction distance
- Cylindrical shape supports simple positioning in rigs and bench demonstrations, helps align magnets consistently for repeatable class results
- Suitable for exploring magnetic interactions with ferromagnetic materials and other magnets, supports basic pole behaviour and field effect observations
- Use under appropriate supervision, avoid impacts and pinching hazards, store to prevent chipping and keep magnets separated or secured to minimise unintended attraction
From AUD 14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Alnico Horseshoe Magnet for Pole Interaction and Attraction Experiments
- Alnico horseshoe magnets for physics demonstrations, supports clear pole interaction activities and magnetic attraction experiments in classrooms
- Multiple sizes listed from 25 mm through to 150 mm, choose size to suit demonstration scale, handling preference and bench space
- Magnets described red and marked N and S, supports fast pole identification and consistent setup for student practical work
- Approximate lifting capacity stated about 300 g, useful for demonstrating magnetic force with paper clips and small ferromagnetic objects
- Use under appropriate supervision, avoid pinching hazards and impacts that can chip magnets, store magnets securely and keep away from sensitive devices and cards
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
ASEP Small Motor and Generator Kit with Pulley Included
- Single small DC motor with two-step pulley fitted
- Bench clamp mounting, pulley overhang for cord winding
- Lifts weight to compare electrical input vs mechanical output work
- Falling weight drives generator mode, kinetic energy to electrical output
- Supports potential and kinetic energy discussion with measurable work
AUD 72.50 (Ex GST)
Bare Copper Wire, Standard Wire Gauge Electrical Reel Range
• Bare copper wire range supplied in Standard Wire Gauge reel formats
• Gauges run from 14 SWG through to 30 SWG for selection flexibility
• Most variations are supplied on practical 125 g reel sizes
• One 18 SWG option is available in a larger 500 g reel
• 14 SWG variation includes stated 2.0 mm diameter for specification clarity
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Basic Electronics Training Kit with Link Components and Meters
- Two electrostatics rubbing cloths for charging plastic rods by friction in classroom practicals.
- Includes wool cloth and cotton flannelette, two common fabrics for static electricity demonstrations.
- Supports charge generation, attraction and repulsion observations after rubbing rods.
- Simple consumable accessory for electrostatics kits, easy to store and issue to students.
- Enables material comparison in friction charging activities without changing experiment setup.
AUD 1,153.50 (Ex GST)
Battery Holder for 2 × 1.5 V AA Cells
- Battery holder designed for 2 × 1.5 V AA cells
- Suitable for laboratory and educational circuit experiments
- Holds batteries securely during demonstrations and student projects
- Provides a practical power source connection point for simple circuits
- Useful for low-voltage experiments with lamps, buzzers, motors and switches
- Supports introductory electricity and electronics activities
- Helps reduce loose battery connections during classroom use
- Suitable for school, university and STEM teaching environments
- Confirm polarity and circuit requirements before use
- Batteries are not included unless specified separately
- Avoid short circuits, overheating and incorrect battery installation
- Use under appropriate laboratory or educational supervision
AUD 1.90 (Ex GST)
Battery Holders for D Cells with 4 mm Terminals
- Battery holders for 1.5 V D cell batteries
- Available for 1, 2, 3 or 4 D cell configurations
- Fitted with 4 mm terminals for classroom circuit connection
- Suitable for laboratory and educational circuit experiments
- Helps hold batteries securely during demonstrations and student projects
- Provides a practical power source connection point for compatible circuits
- Useful for lamps, buzzers, motors, switches and low-voltage investigations
- 4-cell holder is listed with 1.5 V, 3 V, 4.5 V and 6 V output options
- 4-cell holder has listed size of 190 × 122 × 16 mm
- Batteries are not included unless specified separately
- Confirm polarity, voltage and circuit requirements before use
- Use under appropriate laboratory or educational supervision
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
BeeSpi V Photogate Holder, Adjustable Height and Angle
- Holder accessory for compatible BeeSpi V photogate use
- Designed to hold the photogate firmly during classroom experiments
- Adjustable height supports different apparatus and motion setups
- Adjustable angle supports slope, cart and free fall investigations
- Useful for timing, motion and mechanics demonstrations
- BeeSpi V photogate is sold separately as specified
- Suitable for supervised laboratory and educational use
AUD 93.50 (Ex GST)
BeeSpi V Photogate, Battery Operated Speed Measurement Type
- Easy-to-use photogate for speed measurement in physics experiments
- Suitable for free fall, cart motion and projectile velocity demonstrations
- Two parallel photogates detect objects passing through the sensing area
- Measures and displays speeds from zero to 99.99 km/h
- Measurement units include cm/s and km/h for classroom comparison
- Stores up to 5 measurements at a time for practical data review
- Operates with 2 × AAA batteries, not included
AUD 143.50 (Ex GST)
Capacitor Box, Decade Capacitance Type
- Rotary capacitor selection boxes for laboratory and classroom circuit experiments
- Decade models use 10 steps per dial for controlled capacitance selection
- Available total capacitance options include 1.11 µF, 11.1 µF and 11.11 µF
- Step sizes include 0.001 µF, 0.01 µF and 1 µF depending on the selected model
- Single-dial discrete model provides 12 capacitance positions from 220 pF to 1.0 µF
- Voltage ratings include 400 V DC or 250 V DC and 150 V AC depending on model
- 4 mm spin-free terminals and extra earthing terminal support practical circuit connection
From AUD 183.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Centre Zero Student Meter for DC Current
- Centre zero student meters for DC current measurement demonstrations
- Deflection either side of zero supports polarity and current direction teaching
- Single range models available across amp, milliamp and microamp scales
- Suitable for galvanometer-style demonstrations in physics and electronics classes
- Economical and durable design stated for routine educational use
- Large viewing window supports clearer observation during group instruction
- Use within the selected meter range under appropriate supervision
From AUD 43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Centre Zero Student Volt Meter, Dual Range Galvanometer Type
- Centre zero student volt meter for DC polarity demonstrations
- Dual range format supports 50-0-50 mV and 500-0-500 mV readings
- Galvanometer-style scale supports deflection either side of zero
- Suitable for low-voltage circuit and electromagnetism experiments
- Helps demonstrate polarity, voltage direction and small voltage changes
- Economical and durable design stated for educational use
- Use within the selected range under appropriate supervision
AUD 43.90 (Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
- Centre zero student volt meters for DC voltage demonstrations
- Deflection either side of zero supports polarity teaching
- Single range models available in millivolt and volt options
- Suitable for low-voltage circuit and electromagnetism investigations
- 35-0-35 mV option supports small voltage observation tasks
- 2-0-2 V option supports general low-voltage classroom experiments
- Use within the selected voltage range under appropriate supervision
From AUD 43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Circuit Board Alligator Clip Leads, 300 mm Pair
- Pair of alligator clip leads for compatible circuit board kits
- Each lead has alligator clip connections at both ends
- 300 mm length supports practical classroom circuit connections
- Suitable for basic electricity and electronics teaching activities
- Useful for temporary connections during circuit demonstrations
- Can be used as a replacement or spare circuit board kit accessory
- For laboratory or educational use only under appropriate supervision
AUD 12.50 (Ex GST)
Circuit Board Contact Key Switch with Spring Contacts
- Contact key switch accessory for compatible circuit board kits
- Designed for basic electricity and classroom circuit experiments
- Spring contacts allow practical connection from pin to pin
- Supports open and closed circuit demonstrations
- Useful for switching, current flow and circuit control activities
- Can be used as a replacement or spare teaching board component
- For laboratory or educational use only under appropriate supervision
AUD 7.90 (Ex GST)
Circuit Board Copper Foil Sheet, 150 × 150 mm
- Copper foil sheet accessory for compatible circuit board kits
- Cut to a stated 150 × 150 mm square size
- Suitable for basic electricity and conductivity demonstrations
- Supports simple circuit path and conductor investigation activities
- Useful for classroom experiments, preparation work and teaching setups
- Can be selected as a replacement or spare circuit board kit component
- For laboratory or educational use only under appropriate supervision
AUD 17.50 (Ex GST)
Circuit Board D Cell Battery Holder
- D cell battery holder for compatible circuit board kits
- Designed for basic electricity and classroom circuit experiments
- Spring contacts support practical connection from pin to pin
- Suitable for adding a D cell power source to compatible teaching boards
- Supports simple circuit building, testing and demonstration work
- Useful as a replacement or accessory for Worcester-style circuit kits
- For laboratory or educational use only under appropriate supervision
AUD 8.50 (Ex GST)
Circuit Board Kit, Worcester Pattern Complete
- Worcester pattern circuit board kit for basic electricity teaching
- Traditional classroom kit for building simple electrical circuits
- Large back board includes 16 strong upstanding connection pins
- Components use rugged bronze strips to grip the board pins securely
- Includes cell holders, switches, lamps, links and selected circuit parts
- Box size is stated as 360 × 330 × 55 mm, with 1.25 kg weight
- Contains small parts, use only under appropriate educational supervision
AUD 171.90 (Ex GST)
Circuit Board Kit, Worcester Type Full Kit
- Worcester type circuit board kit for basic electricity teaching
- Spring-terminal board supports fast circuit assembly and testing
- No soldering required, allowing quick circuit changes during lessons
- Supplied with lamps, switches, batteries and connecting leads
- Includes potentiometer, resistor, diode, electrodes, copper foil and steel wool
- Supports series circuits, parallel circuits, conductivity and resistance work
- Supplied with instruction manual for structured classroom experiments
AUD 171.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Electricity and Magnetism is a fundamental area of physics that explores how electric charges interact, how electric currents flow, and how magnetic fields are generated and behave. Laboratory experiments in electricity and magnetism help students and researchers understand key concepts such as electric circuits, electromagnetic induction, resistance, capacitance, magnetic fields, and the relationship between electricity and magnetism. These principles form the scientific foundation for modern technologies including electronics, power systems, communication devices, and electromagnetic instruments.
In teaching laboratories and research environments, electricity and magnetism apparatus is used to demonstrate practical electrical behaviour through controlled experiments. Typical equipment may include power supplies, galvanometers, ammeters, voltmeters, resistors, coils, electromagnets, magnetic field demonstrators, and circuit experiment kits. These tools allow students to investigate electrical conductivity, Ohm’s law, magnetic field patterns, electromagnetic induction, and other important phenomena in a clear and measurable way.
Where electrical measurement equipment is used in laboratories, the international safety standard for electrical equipment used in measurement, control, and laboratory environments. In cases where laboratory glass components are used within electrical experiments, relevant material standards may include ISO 3585 for BORO 3.3 borosilicate glass properties and ASTM E438 for laboratory glass quality. For manufacturers and suppliers of laboratory equipment, ISO 9001 quality management systems are commonly recognised to ensure consistent product quality and reliability.
Electricity and magnetism experiments are essential for physics education because they allow students to directly observe and measure invisible forces and fields. Practical demonstrations of electromagnetic principles help build deeper understanding of current flow, magnetic interactions, energy transfer, and electrical measurement techniques.
At LabChoice Australia, we supply dependable electricity and magnetism laboratory apparatus suitable for school science laboratories, university physics teaching environments, and demonstration setups. Our range is selected to support clear visual learning, repeatable experiments, and reliable classroom use, helping educators demonstrate fundamental electromagnetic principles with confidence.