Tri-Mode Signal Generator, Power Supply and Amplifier
$1,023.90(Ex GST)
$1,023.90(Ex GST)
- Three-in-one teaching instrument for electronics experiments
- Includes regulated ±1.2 to 20 V DC power supply
- DC power supply output is stated as 250 mA
- Signal generator frequency range is stated as 0.1 Hz to 100 kHz
- High power signal generator output is stated as 0.5 A
- Includes audio amplifier with high and low sensitivity inputs
- Provides oscilloscope output and internal speaker
- Description
- Datasheets & Manuals
Description
The TriMode Signal Generator, also known as a combined signal generator, DC power supply and audio amplifier, is designed for electronics teaching, circuit demonstrations and wave experiments in physics laboratories, electronics classrooms and university teaching laboratories.
This instrument combines three useful teaching functions in one unit. It provides a regulated DC power supply, a high power signal generator and an audio amplifier, reducing the need for multiple separate instruments during classroom experiments. The power supply section is stated as a metered and regulated ±1.2 to 20 V DC supply with 250 mA output. This supports practical low-voltage circuit work, component demonstrations and introductory electronics activities. The signal generator section covers 0.1 Hz to 100 kHz and is stated to provide the same high power output of 0.5 A as the related high power signal generator range. This makes it suitable for waveform demonstrations, resonance activities, audio experiments and practical signal investigations.
Waveform options are stated as sine, triangular and square waveforms, including square output with positive and negative excursion and square output with positive excursion only. These waveform choices support signal comparison, oscilloscope demonstrations and frequency-response experiments. The built-in audio amplifier includes high and low sensitivity inputs, an oscilloscope output and an internal speaker. This supports demonstrations involving sound, amplification, signal tracing and waveform observation without needing a separate amplifier for many classroom activities. The instrument operates from 240 V AC mains power and should be used only under appropriate supervision. Users should connect compatible circuits and loads, remain within the stated voltage and current limits and follow standard laboratory electrical safety procedures.
LabChoice Australia supplies TriMode Signal Generators for school physics departments, electronics classrooms, university teaching laboratories and educational electrical workspaces. They are suitable for supervised DC power supply work, waveform generation, audio amplification, oscilloscope demonstrations, resonance studies and hands-on electronics experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
$10.90(Ex GST)
Microplate Clamp for Digital Vortex Mixer
$44.50(Ex GST)
Spatula Knife Wooden Handle, Stainless Steel Blade, High Quality
From $7.50 (Ex GST)
Oscillator Generator at Very Slow Range & Low-Frequency AC Sine
$174.50(Ex GST)
You May Also Need
Battery Holders for AA and D Cells, 1 to 4 Cells, 4 mm Terminals Options
From $1.90 (Ex GST)
Circuit Board Kit, Worcester Pattern Complete
$171.90(Ex GST)
Circuit Board Rheostat, 10 Ohm, Spring Connect
$19.90(Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From $656.50 (Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From $61.50 (Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From $46.50 (Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From $9.50 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
$214.50(Ex GST)
Hofmann Voltameter Spare Platinum Electrodes, Pair
$114.90(Ex GST)
Iron Filings, Magnetic Field Pattern Demonstration Material
From $7.50 (Ex GST)
Norwood-Style Glass Electrodes, Set of 4, Kit Components
$125.90(Ex GST)
U-Core Electromagnet and Armature Set, 12 V DC Rated
$97.50(Ex GST)
Water Turbine Hydro-Electric Power
$216.90(Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
From $12.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
