High Power Light Source on Base, BA15D, 12 V, 15 to 21 W
- High power light source for classroom electricity and light experiments
- Consists of a small bayonet socket mounted to a base
- Designed for BA15D double-contact lamp use
- Lamp rating normally used is 12 V, 15 to 21 W
- Base is fitted with 4 mm spin-free IEC terminals
- Suitable for low-voltage teaching circuits and demonstration setups
- Practical for brighter lamp output than simple MES light sources
- Confirm lamp inclusion, power source, voltage rating and classroom supervision before use
AUD 64.90 (Ex GST)
High Power QI Light Source, 12 V × 100 W
- Very high power QI light source for laboratory and educational use
- Fitted with a 12 V × 100 W quartz halogen lamp
- Metal housing includes viewing holes on two sides
- Shutters allow users to select the required viewing hole
- Ventilated housing allows airflow while limiting unwanted light escape
- Strong support rod allows mounting on a retort stand with boss head
- 1 m cable terminated with moulded stackable banana plugs
- Suitable for supervised optics and high-intensity light demonstrations
- Generates considerable heat during operation
- Confirm power supply capacity, mounting setup and safety procedure before use
AUD 224.50 (Ex GST)
High Power Signal Generator, 0.1 Hz to 100 kHz
- High power signal generator for physics and electronics teaching
- Frequency range is stated as 0.1 Hz to 100 kHz
- Frequency selection is provided over 6 ranges by graduated knob
- Selectable sine, triangular and square waveform outputs
- 600 Ω output provides 0 to 10 V peak signal
- 20 Ω output provides adjustable 0 to 10 V peak signal
- High current output can drive suitable speakers and mechanical devices
AUD 621.90 (Ex GST)
High Pressure Boyle’s Law Apparatus with Air Pump, Non-Mercury
- High-pressure Boyle’s Law apparatus for pressure and volume demonstrations
- Non-mercury design uses a coloured fluid in the pressure container
- Air pump raises pressure so pressure can be read on the gauge
- Heavy-walled glass tube shows reduced air volume as pressure increases
- Adjustable pointer can be clamped to indicate starting volume
- Complete kit includes air pump and coloured fluid as supplied
- Suitable for supervised laboratory and educational gas law experiments
AUD 387.90 (Ex GST)
High Speed Homogenizer with Stand and Shaft for Emulsification 10-5000 mL Capacity, 10000-30000 rpm
- High speed homogenizer package for emulsification, dispersion and sample pre-treatment workflows
- Supplied with stand and emulsification shaft for 10 to 5000 mL processing volume
- Speed range from 10000 to 30000 rpm with 6-stage speed control
- Emulsification shaft supports 23.5 m/sec maximum circumferential speed
- Maximum viscosity is listed as 10000 mPa·s for suitable homogenising applications
- SS 316L stainless steel and PTFE shaft construction supports compatible laboratory use
- Overload protection, smooth motor start and stable acceleration support controlled operation
AUD 4,510.00 (Ex GST)
High Speed Homogenizer with Stand and Shaft for Solid-liquid Mixing 10-5000 mL Capacity, 10000-30000 rpm
- High shear homogenizer package for solid-liquid mixing, dispersion, emulsification and sample pre-treatment
- Supplied with stand and dispersing shaft for 10 to 5000 mL processing volume
- Speed range from 10000 to 30000 rpm with 6-stage speed control
- Dispersing shaft supports 23.5 m/sec maximum circumferential speed
- Maximum viscosity is listed as 10000 mPa·s for suitable homogenising applications
- SS 316L stainless steel and PTFE shaft construction supports compatible laboratory use
- Overload protection, smooth motor start and stable acceleration support controlled operation
AUD 4,510.00 (Ex GST)
High-Sensitivity Current Amplifier for Electromagnetic Induction
- High sensitivity amplifier for laboratory and educational use
- Converts very small currents into larger readable current
- Designed for Electromagnetic Induction apparatus LC-80-EM1740-001
- Converts microamp current into milliamp readings as listed
- Suitable for use with a normal student meter
- Extremely low input impedance as listed
- Gain adjustable from low up to about 1000:1
- Amplifies at very low input voltages
- Includes zero offset control for improved accuracy
- Includes gain control for amplification adjustment
- Powered by internal 9 V #216 dry cell
- Use under appropriate laboratory or educational supervision
AUD 119.90 (Ex GST)
High-Sensitivity Digital Electrometer for Low-Charge Measurement
- Digital electrometer for very small electrical measurements
- IEC digital electrometer as listed
- Measures small quantities of voltage, current and charge
- Voltage ranges listed up to 2000 mV
- Current ranges listed up to 2000 nA
- Charge range listed up to 2000 nC
- Very high impedance as listed
- Useful for electrostatic charge measurements
- Suitable for capacitor charging and insulation current experiments
- Supports demonstrations with electrostatic rods and Aepinus capacitors
- Do not connect to mains or high-energy circuits
- Use under appropriate laboratory or educational supervision
AUD 516.50 (Ex GST)
Hodson Light Box and Optical Set, 12 V
- Complete Hodson light box and optical set for classroom optics experiments
- Designed for basic optics, ray tracing and colour blending activities
- Light box is designed to take a 12 V × 30 W QI lamp
- Lamp socket allows one compatible light box to be plugged into another
- Stackable banana plugs are moulded to the cables
- Lens adjuster is designed so students cannot remove it
- Includes 3 slit formers for producing multiple rays
- Heat-resistant colour filters and plates are supplied in sets of 8
- Mirrors are described as efficient and virtually unbreakable
- Available as standard 12 V kit or with mini 240/12 V transformer
From AUD 190.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hodson Optical Bench and Lens Kit
- 1.5 m optical bench for reflection, refraction, lens and image formation experiments
- Adjustable metric scale supports repeatable positioning and measurement during practical work
- Includes convex and concave lenses for focal length and image formation studies
- Supplied with targets, photographic slides, white screen and sliding component supports
- Large prism and prism table support refraction, dispersion and prism-based demonstrations
- Available with Hodson light box source or as a lower-price kit without the light box
- Suitable for school physics laboratories and supervised optics teaching activities
From AUD 247.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
- Hoffman screw tubing clips for sealing compatible flexible tubing
- Designed to block air or gas flow by pinching tubing sides together
- Adjustable screw supports controlled closure pressure during use
- Projecting plate helps protect tubing from direct screw damage
- Hinged side bar allows fitting without access to tubing ends
- Available in 18, 20, 25, 30 and 40 mm maximum opening sizes
- Suitable for supervised laboratory and educational tubing workflows
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hofmann Voltameter Spare Carbon Electrodes, Pair
- Spare carbon electrodes for glass type Hofmann voltameter
- Supplied as a pair for replacement use
- Accessory designed for compatible Hofmann electrolysis apparatus
- Stopper size listed as 18 mm × 13 mm, top × bottom
- Not designed to fit LC-80-GE5600-01
- Suitable for classroom electrolysis demonstrations
- For laboratory or educational use under appropriate supervision
AUD 18.90 (Ex GST)
Hofmann Voltameter Spare Platinum Electrodes, Pair
- Spare platinum electrodes for Hofmann voltameter use
- Supplied as a pair for replacement or setup maintenance
- Designed to fit LC-80-GE5600-01 Hofmann voltameter
- Suitable for compatible glass Hofmann voltameter applications
- Can be adapted using rubber stopper #3, one hole type
- Tight stopper fit may require gentle insertion with water lubrication
- For laboratory or educational use under appropriate supervision
AUD 114.90 (Ex GST)
Hofmann Voltameter, All Plastic Electrolysis Type
- Hofmann voltameter for electrolysis demonstrations
- All plastic type, Australian designed and manufactured
- Includes 1 pair of platinum electrodes
- Robust classroom design for repeated educational use
- Supports demonstrations of water decomposition and gas collection
- Must be washed after each use for proper maintenance
- Use PPE when filling with acid solution and follow instructions carefully
AUD 302.90 (Ex GST)
Hollow Stoppers, High Quality Borosilicate Glass (BORO 3.3), Heavy Quality
- Lightweight hollow design reduces joint stress
- Precision-ground for airtight, leak-resistant sealing
- Durable and reusable for long-term use
- Ideal for flasks, condensers, and jointed glassware
- Used in chemistry, pharmaceutical, and academic labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.10 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hooke’s Law Apparatus with Spring, Scale and Stand
- Complete Hooke’s Law apparatus for physics demonstrations
- Designed for studying spring extension under applied load
- Includes 15 cm adjustable scale as listed
- Scale is marked in millimetres
- Adjustable scale helps reduce parallax error
- Mounted on a sturdy 30 cm support rod
- Supplied with wooden base as listed
- Includes hook supporting a coiled spring
- Includes mass hanger and indicator as listed
- Suitable for force, extension and elasticity experiments
- Confirm required masses before ordering
- Use under appropriate laboratory or educational supervision
AUD 43.90 (Ex GST)
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
- Tension spring sets for Hooke’s Law mass and extension experiments
- Suitable for mechanics, force and elasticity demonstrations
- Available as non-proportional 5-spring or proportional 6-spring sets
- Non-proportional set includes mixed spring lengths, diameters and wire sizes
- Proportional set is designed with related spring dimensions and wire diameters
- Proportional springs include an eye at each end for hanging load setups
- Suitable for supervised physics laboratory and classroom use
From AUD 28.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hose Connection Adapter Bent BORO 3.3 Glass Laboratory Grade
- Connects and extends glassware joints for flexible lab setups
- Ideal for distillation, extraction, and reflux applications
- Provides airtight, precise connections between apparatus
- Heat and chemical resistant for demanding lab use
- Crafted from premium BORO 3.3 borosilicate glass
- High-quality product by LabChoice Australia
From AUD 23.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hot/Cold Thermopile on Heat Sink with Socket Terminals
- Thermopile hot / cold apparatus for laboratory and educational use
- Demonstrates the Peltier effect using a thermo-generator cell
- Flat plate junction produces one hot side and one cold side when DC is applied
- Mounted on heat sink as listed
- Supplied with 2 × 4 mm sockets as listed
- Allows DC connection through standard laboratory leads
- Heating and cooling effect is visually and physically observable
- Ice may form on the cold side under suitable conditions as listed
- Useful for teaching thermoelectric effects and energy transfer
- Suitable for physics, heat and electricity demonstrations
- Requires compatible DC power supply
- Use under appropriate laboratory or educational supervision
AUD 123.50 (Ex GST)
Human Anatomy Torso Model for Teaching
- Human anatomical torso models designed for biology education and anatomy demonstrations
- Available in three configurations: Male & Female, Half Life Size and Sexless
- Male & Female model stands 850 mm high and consists of 24 parts
- Features interchangeable male and female reproductive organs, including a fetal model within the uterus
- Sexless torso stands 850 mm high and consists of 17 parts
- Half Life Size model measures 520 mm high and is manufactured from plastic
- Removable anatomical structures support hands-on study of human organ systems
- Detailed representations of the brain, heart, lungs, digestive organs and spinal structures in the larger models
- Male & Female model features an exposed spine with removable vertebral and spinal cord components
- Colourful anatomical presentation helps students identify human body structures
- Suitable for schools, universities, biology classrooms and medical education
From AUD 224.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Elbow Joint Anatomical Model with Ligaments
- IEC human elbow joint model designed for anatomy, biology and medical science education
- Three-dimensional anatomical model represents the human elbow joint with ligaments
- Illustrates the relationship between the humerus, radius and ulna at the elbow joint
- Features ligament representations to support studies of joint stability and structure
- Helps students understand elbow flexion, extension and forearm rotation principles
- Supports teaching of the humeroulnar, humeroradial and proximal radioulnar articulations
- Useful for explaining ligament function, joint movement and musculoskeletal anatomy
- Suitable for classroom demonstrations, anatomy lessons and practical biology studies
- Supplied as one anatomical teaching model for schools, universities and training labs
AUD 95.90 (Ex GST)
Human Hip and Leg Joint Anatomical Model with Ligaments
- IEC human hip and leg joint model designed for anatomy, biology and healthcare education
- Three-dimensional anatomical model represents the human hip joint with ligament structures
- Illustrates the relationship between the femoral head and the acetabulum of the pelvis
- Features ligament representations for studying hip joint stability and skeletal support
- Helps explain hip flexion, extension, abduction, adduction and rotational movements
- Demonstrates the structural principles of the human ball-and-socket synovial joint
- Overall model dimensions of 160 × 160 × 300 mm for classroom and laboratory displays
- Weighs approximately 0.9 kg for convenient handling during anatomy demonstrations
- Suitable for schools, universities, nursing, physiotherapy and medical training laboratories
AUD 105.90 (Ex GST)
I-Gauge with BeeSpi V for Height, Speed and Impact Experiments
- I-Gauge apparatus with BeeSpi V for mechanics demonstrations
- Demonstrates the relationship between height and speed
- Also supports impact force observations on an object
- Includes 1 steel ball and 1 ceramic ball
- Ball diameter listed as approximately 25 mm
- Equipment size listed as 1050 × 100 × 185 mm
- Track length listed as 1000 mm
- Scale length listed as 500 mm
- Track angle adjustable from 0° to 45°
- Includes acrylic resin object block, approximately 40 × 80 × 14 mm
- BeeSpi V, S77-1321-W0, included as listed
- Use under appropriate laboratory or educational supervision
AUD 610.50 (Ex GST)
Ice Box 4°C Thermostatic Cooling Unit with Choice of 1 Optional Block
- 4°C laboratory cooling unit supplied with a choice of 1 compatible optional block
- Peltier-based temperature regulation supports stable and reliable 4°C cooling performance
- Rapid cooling reduces temperature from ambient conditions to 4°C in approximately 10 minutes
- Fixed 4°C temperature setting supports sensitive sample preservation and handling workflows
- Multi-colour LED indicators show operating status and system activity
- Magnetic block attachment allows quick and convenient module replacement
- Suitable for sample preservation, reagent cooling and controlled laboratory cooling processes
AUD 1,122.00 (Ex GST)
IEC Hot Plate Water Bath (Bath Only)
- Water bath designed for use with compatible IEC hot plates
- Supplied as bath only
- Allows water bath heating using an IEC hot plate as the heat source
- Can fit two compatible test tube stands
- Useful for low-cost biological and laboratory heating workflows
- Sliding ends rest on the work bench for stable support during use
- Sliding ends can move up to reduce storage size
- Can also be used as a dry oven where the method is suitable
- Optional thermostat control LC-80-CH4240-101 is purchased separately
- Use under appropriate laboratory or educational supervision
AUD 323.50 (Ex GST)
Immersion Heater for Calorimeter Block Heating
- Immersion heater for compatible calorimeter blocks
- Designed for laboratory and educational calorimetry experiments
- Rated at 12 V and 50 W as listed
- Heater dimensions listed as 100 × 11.9 mm
- Lead length listed as 820 mm
- Compatible with TECHNOS calorimeter blocks as listed
- May not be compatible with all calorimeter blocks
- Check heater dimensions before purchasing
- Useful for heating metal calorimeter blocks in physics experiments
- Confirm power supply compatibility before use
- Immersion heater only, calorimeter block and power supply are not included
- Use under appropriate laboratory or educational supervision
AUD 62.50 (Ex GST)
In-Line Mini DC Ammeter, ±3 A Digital Current Meter
- In-line mini digital ammeter for DC current measurement
- Measurement range is stated as ±3 A
- Auto-switching display resolution supports low and higher current readings
- Supplied with alligator clip leads for direct circuit connection
- Polarity indicator shows plus or minus current direction
- Auto power off helps conserve the CR1220 lithium battery
- Compact 53 × 21 × 15 mm body for classroom circuit work
AUD 124.50 (Ex GST)
Infrared Digital Vortex Mixer with Flat Rubber Sleeve
- LCD screen displays real-time speed and time for easy adjustment and monitoring.
- Adjustable speed ranges from gentle to vigorous mixing to suit various needs.
- Dual-sided IR sensing for automatic tube detection and mixing, accommodating different user preferences.
- Stable with pressure-mounted accessories to prevent slippage and splashing.
- Brushless DC motor for high stability and maintenance-free operation.
- Sturdy base ensures stability during operation for safety.
- Includes various accessories for different sizes and types of tubes and plates.
- Low noise for a quiet working environment.
- Automatic start upon tube detection — no pressure required.
- Infrared sensing technology significantly reduces repetitive strain compared to traditional touch activation.
AUD 847.50 (Ex GST)
Inlet Thermometer Adapter with Vacuum Hose Connection, BORO 3.3 Glass
- Thermometer inlet adapter for compatible laboratory glassware
- Made from BORO 3.3 borosilicate glass
- Combines thermometer insertion with side hose connection
- Suitable for temperature monitoring during approved glassware setups
- Side serrated hose connection supports flexible tubing attachment
- Available joint sizes include 14/20, 19/22, 24/40 and 24/29
- Includes threaded compression cap for thermometer positioning
- Equipped with PP thermometer nut and internal silicone gasket
- Listed stable operating temperature is 100°C
- Useful for chemistry, teaching and general laboratory applications
- Confirm joint size, thermometer diameter and hose compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 39.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Inoculating Loop Holder, 200 mm
- Inoculating loop holder for microbiology workflows
- Overall length listed as 200 mm
- Designed to hold compatible inoculating loops
- Suitable for culture transfer and streaking demonstrations
- Used with inoculating loops for retrieving and transferring inoculum
- Supports plate streaking and smear preparation activities
- Compatible inoculating loops are sold separately under BI0974-01
- Suitable for school, university and teaching laboratory use
- Supplied as the holder only
- Use under appropriate laboratory or educational supervision
AUD 12.50 (Ex GST)
Inoculating Loops, 1 µL, Blue, Individually Wrapped
- 1 µL inoculating loops for microbiology workflows
- Blue colour-coded loop format
- Made from polypropylene material
- Hydrophilic treated for improved liquid handling
- Flexible handles support easier collection and inoculation
- Sterilised by ethylene oxide
- Easy-tear individual packaging
- Supplied as pack of 400
- Case quantity listed as 4000
- Suitable for culture transfer, plate streaking and smear preparation
- Use under appropriate laboratory or educational supervision
AUD 69.90 (Ex GST)
Inoculating Loops, 10 µL, Yellow, Individually Wrapped
- 10 µL inoculating loops for microbiology workflows
- Yellow colour-coded loop format
- Made from polypropylene material
- Hydrophilic treated for improved liquid handling
- Flexible handles support easier collection and inoculation
- Sterilised by ethylene oxide
- Easy-tear individual packaging
- Supplied as pack of 400
- Case quantity listed as 4000
- Suitable for culture transfer, plate streaking and smear preparation
- Use under appropriate laboratory or educational supervision
AUD 69.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.