Handheld Homogenizer with Stand and 7 mm Shaft, for 1-150 mL Capacity, 8000-32000 rpm
- Handheld homogenizer package for disruption, dispersion, emulsification and homogenisation workflows
- Supplied with 7 mm dispersing shaft for 1 to 150 mL sample processing
- Includes stand for compatible support during laboratory operation
- Speed range from 8000 to 32000 rpm with 10-stage speed control
- Dispersing shaft supports 10 m/sec maximum circumferential speed
- Maximum viscosity is listed as 5000 mPa·s for suitable homogenising applications
- Interchangeable shaft design supports dismantling, cleaning and workflow flexibility
AUD 2,321.00 (Ex GST)
Handheld pH Meter Tester Kit for Strong Acid and Hydrofluoric Acid Solutions with LabSen 835 ATC Electrode, -2.00 to 16.00 pH
- Handheld pH meter tester kit for strong acidic and HF-containing water solution workflows
- Supplied with LabSen 835 ATC pH / temperature electrode for specialised acid sample testing
- HF-resistant membrane is designed to resist hydrofluoric corrosion and reduce acidic error
- Listed for up to 1000 HF measurements under specified conditions: less than 1 minute measurement time and HF concentration below 0.1 mol/L or 2000 ppm
- Silver Ion Trap reference system with open junction and polymer electrolyte supports long-term reference stability
- Intelligent meter functions include automatic calibration, ATC, reading alarm settings and automatic reading lock
- Complete kit includes User Manual, LabSen 835 pH Electrode, PH60 Meter Body, CalPod Solution Organizer, pH 1.68 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution and Protective Cap
AUD 498.00 (Ex GST)
Handheld pH Meter Tester Kit for Strong Alkaline and High Salinity Water with LabSen 845 ATC Electrode, -2.00 to 16.00 pH
- Handheld pH meter tester kit for strong alkaline, high salinity and general water solutions
- Paired with LabSen 845 ATC pH / temperature electrode for reliable portable measurement
- HA membrane helps minimise alkaline error in challenging high-pH and saline samples
- Silver Ion Trap reference system with open junction and polymer electrolyte supports stable electrode performance
- Intelligent meter functions include automatic calibration, ATC, reading alarm and automatic reading lock
- Complete kit includes User Manual, LabSen 845 pH Electrode, PH60 Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 12.45 Solution, 3M Soaking KCL Solution and Protective cap
AUD 498.00 (Ex GST)
Handheld Salinity Refractometer, 0 to 10%, ATC
- Handheld salinity refractometer for laboratory and educational use
- Salinity range listed as 0 to 10%
- Refractive index range listed as 1.000 to 1.070 RI
- ATC function supports automatic temperature compensation
- Suitable for testing salinity in water-based samples
- Useful for aquaria, fish tanks, seawater and food production checks
- Suitable for chemical production and general laboratory demonstrations
- Compact handheld format supports field-style and bench use
- Confirm sample type, calibration method and measuring range before use
- For laboratory or educational use only under appropriate supervision
AUD 99.90 (Ex GST)
Handheld Turbidity Meter, 0 to 200 NTU Range
- Handheld turbidity meter for water clarity and suspended particle testing
- Uses 90° scattered light measurement principle for turbidity detection
- Measuring range from 0 to 200 NTU
- Minimum reading of 0.1 NTU for routine water analysis
- Repeatability ≤1% with zero drift ±1% F.S
- Indicator error stated as ±8% or ±2.5% F.S
- Flexible power options: AC supply, DC adapter or 5 × AA batteries
AUD 430.90 (Ex GST)
Happy and Unhappy Bouncing Balls, Pair
- Pair of black spheres for physics and materials demonstrations
- Balls appear almost identical but behave differently when bounced
- Demonstrates how physical properties affect motion and rebound
- Useful for teaching elasticity, energy transfer and material behaviour
- Supplied with experiment suggestions
- Practical hands-on resource for classroom observation activities
- Suitable for physics, STEM and general science education
- Useful for comparing bounce response between different materials
- Choking hazard warning applies
- Intended for laboratory or educational settings only
- Use under appropriate teacher or laboratory supervision
AUD 21.50 (Ex GST)
HDPE Reagent Bottle, Narrow Mouth, Sterile
- Non-sterile HDPE reagent bottle with narrow mouth for secure laboratory reagent storage
- Narrow mouth design supports controlled pouring and helps reduce accidental liquid loss
- Leak-proof bottle format helps protect reagents during handling, storage and transport
- Made from HDPE for practical routine laboratory chemical and reagent containment
- USP Class VI material suitability supports quality-conscious laboratory workflows
- FDA approved bottle option for dependable laboratory and regulated-use environments
- Non-sterile format suitable for general laboratory applications where sterility is not required
- Suitable for reagent storage, sample handling, buffer preparation and routine liquid storage
- Practical choice for research, education, clinical, industrial and general laboratory use
- Supplied by LabChoice Australia for dependable HDPE reagent bottle use across Australian labs
From AUD 2.41 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
HDPE Reagent Bottle, Wide Mouth, Sterile
- Sterile HDPE reagent bottle with wide mouth design for secure laboratory reagent storage
- Wide mouth opening supports easier filling, pouring, dispensing and sample transfer
- Leak-proof bottle format helps protect contents during handling, storage and transport
- Made from HDPE for dependable reagent, buffer and sample containment
- USP Class VI material suitability supports quality-conscious laboratory workflows
- FDA approved bottle option for professional and regulated laboratory environments
- Sterile format suitable for contamination-conscious reagent and sample handling
- Suitable for reagent storage, sample handling, buffer preparation and routine liquid storage
- Practical choice for research, education, clinical, industrial and general laboratory use
- Supplied by LabChoice Australia for dependable sterile HDPE wide mouth reagent bottle use across Australian labs
From AUD 2.66 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Heat Conductivity Rods, 300 × 6 mm, Individual Metals and Set of 4
- Heat conductivity rods for comparing thermal conductivity of different metals
- Rod size listed as 6 × 300 mm, diameter × length
- Available as individual copper, brass, iron and aluminium rods
- Set option includes 4 rods: copper, brass, iron and aluminium
- Suitable for classroom heat transfer and thermal conductivity experiments
- Helps students observe differences in heat conduction between metal types
- Can be used with compatible heat conductivity apparatus or classroom methods
- Related heat conductivity ring option listed as LC-80-HL0910-001
- Confirm experiment setup, heating method and supervision requirements before use
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Heat Conductometer on Handle for Thermal Conductivity
- Heat conductometer for thermal conductivity demonstrations
- Includes five different metal rods as listed
- Metals include aluminium, brass, copper, nickel and steel
- Metal types stamped on centre circle as A, B, S, N and C
- Handle length listed as 26 cm
- Designed to show which metal conducts heat best
- Rods are heated simultaneously over a flame
- Wax melting at rod tips shows relative heat conduction
- Includes wax block and instructions as listed
- Heat source is required and not included
- Use care with flame, hot metal and melted wax
- Use under appropriate laboratory or educational supervision
AUD 24.90 (Ex GST)
Heating Block for 0.2 mL Tubes, 30 Holes
- Heating block for compatible dry bath systems
- Designed for 0.2 mL tube formats
- 30-hole capacity for small sample workflows
- Hole size stated as 6.3 mm diameter × 20 mm depth
- Supports controlled dry bath heating applications
- Suitable for laboratory sample preparation workflows
- Confirm dry bath compatibility before use
Heating Block for 0.2 mL Tubes, 40 Holes
- Heating block for compatible mini dry bath systems
- Designed for 0.2 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 6.4 mm diameter × 17 mm depth
- Supports controlled mini dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm mini dry bath compatibility and 0.2 mL tube fit before use
Heating Block for 0.2 mL Tubes, 54 Holes
- Heating block for compatible dry bath systems
- Designed for 0.2 mL tube formats
- 54-hole capacity for small-volume sample workflows
- Hole size stated as 6.4 mm diameter × 15 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and 0.2 mL tube fit before use
Heating Block for 0.5 mL Tubes, 24 Holes
- Heating block for compatible mini dry bath systems
- Designed for 0.5 mL tube formats
- 24-hole capacity for small-volume sample workflows
- Hole size stated as 8 mm diameter × 26 mm depth
- Supports controlled mini dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm mini dry bath compatibility and 0.5 mL tube fit before use
Heating Block for 0.5 mL Tubes, 40 Holes
- Heating block for compatible mini dry bath and dry bath systems
- Designed for 0.5 mL tubes used in small-volume sample workflows
- 40-hole capacity supports simultaneous processing of multiple samples
- Hole dimensions approximately 8.2 mm diameter × 26.4 mm depth
- Suitable for heating, incubation and temperature-controlled sample preparation
- Practical for research, teaching and routine laboratory use
- Confirm dry bath compatibility and 0.5 mL tube fit before use
Heating Block for 1.5 mL Tubes, 15 Holes
- Heating block for compatible mini dry bath systems
- Designed for 1.5 mL tube formats
- 15-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 31 mm depth
- Supports controlled mini dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm mini dry bath compatibility and 1.5 mL tube fit before use
Heating Block for 1.5 mL Tubes, 20 Holes
- Heating block for compatible dry bath systems
- Designed for 1.5 mL microtube formats
- 20-hole capacity for routine sample workflows
- Hole size stated as 11 mm diameter × 35 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and tube fit before use
Heating Block for 1.5 mL Tubes, 40 Holes
- Heating block for compatible mini dry bath and dry bath systems
- Designed for 1.5 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 1.5 mL tube fit before use
Heating Block for 15 mL Tubes, 12 Holes
- Heating block for compatible dry bath systems
- Designed for 15 mL tube formats
- 12-hole capacity for larger tube workflows
- Hole size stated as 16.6 mm diameter × 73 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and 15 mL tube fit before use
Heating Block for 15 mL Tubes, 4 Holes
- Heating block for compatible dry bath and dry block heating systems
- Designed for 15 mL tube formats
- 4-hole capacity for larger tube workflows
- Hole size stated as 16.6 mm diameter × 46 mm depth
- Supports controlled dry bath and dry block heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and 15 mL tube fit before use
Heating Block for 2 mL Tubes, 15 Holes
- Heating block for compatible mini dry bath systems
- Designed for 2 mL tube formats
- 15-hole capacity for small-volume sample workflows
- Hole size stated as 10.9 mm diameter × 31 mm depth
- Supports controlled mini dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm mini dry bath compatibility and 2 mL tube fit before use
Heating Block for 2 mL Tubes, 20 Holes
- Heating block for compatible dry bath systems
- Designed for 2 mL tube formats
- 20-hole capacity for routine sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and tube fit before use
Heating Block for 2 mL Tubes, 40 Holes
- Heating block for compatible mini dry bath and dry bath systems
- Designed for 2 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 2 mL tube fit before use
Heating Block for 5 mL Tubes, 12 Holes
- Heating block for compatible dry bath systems
- Designed for 5 mL tube formats
- 12-hole capacity for routine sample workflows
- Hole size stated as 16.6 mm diameter × 46 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and 5 mL tube fit before use
Heating Block for 5 mL Tubes, 6 Holes
- Heating block for compatible mini dry bath systems
- Designed for 5 mL tube formats
- 6-hole capacity for small batch sample workflows
- Hole size stated as 16.2 mm diameter × 31 mm depth
- Supports controlled mini dry bath heating applications
- Suitable for temperature-controlled sample preparation
- Confirm mini dry bath compatibility and 5 mL tube fit before use
Heating Block for 50 mL Tubes, 2 Holes
- Heating block for compatible dry bath and dry block heating systems
- Designed for 50 mL tube formats
- 2-hole capacity for larger tube workflows
- Hole size stated as 28.8 mm diameter × 45 mm depth
- Supports controlled dry bath and dry block heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and 50 mL tube fit before use
Heating Block for 50 mL Tubes, 4 Holes
- Heating block for compatible dry bath systems
- Designed for 50 mL tube formats
- 4-hole capacity for larger tube workflows
- Hole size stated as 29.2 mm diameter × 73.5 mm depth
- Supports controlled dry bath and dry block heating applications
- Suitable for temperature-controlled sample preparation
- Confirm dry bath compatibility and 50 mL tube fit before use
Heating Block for Deep Well Plate
- Heating block designed for compatible deep well plate formats
- Capacity supports 1 deep well plate
- Block dimensions stated as 128.5 × 86.5 × 38 mm
- Suitable for compatible dry bath and dry block heating systems
- Supports temperature-controlled deep well plate sample preparation
- Useful for organised plate-based laboratory workflows
- Confirm dry bath model, plate format and block compatibility before use
Heavy Duty Digital Max Min Thermometer, -10 to +50°C
- Heavy duty digital max/min thermometer for temperature monitoring
- Displays minimum, maximum and current temperature simultaneously
- Temperature range listed as -10 to +50°C
- Celsius and Fahrenheit display capability
- Display resolution listed as 0.1°C
- Accuracy listed as ±1°C
- Sampling rate listed as every 10 seconds
- Water resistant to IP65
- Supplied in a white casing
- Uses 1 × AA battery, included
- CE and RoHS/WEEE approved
- Suitable for indoor and outdoor monitoring applications
AUD 52.50 (Ex GST)
Heavy Liquids Hydrometer, Specific Gravity and Baume
- Heavy liquids hydrometer for laboratory liquid measurement
- Designed for liquids heavier than water as listed
- Measures specific gravity and Baume depending on selected model
- Thimson option listed as 1.000 to 2.000 specific gravity
- Thimson option listed as 0 to 70 °Bé combined range
- Brannan / Brannon Baume options listed for heavier-than-water liquids
- Brannan / Brannon options listed as 250 mm long and adjusted at 15.6°C
- Thimson length listed as 270 mm in title, with one option listed as 305 mm
- Soda glass, steel shot ballast and synthetic wax resin listed for Brannan / Brannon options
- Glass hydrometer material listed for Thimson option
- Brand spelling and material details should be confirmed before final upload
- Use under appropriate laboratory or educational supervision
From AUD 39.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Heavy-Duty Four Finger Jumbo Condenser Holder Clamp with 12 Inch Rod, 100–125 mm Dia
- Heavy-duty jumbo condenser holder clamp for laboratory support setups
- Designed for holding compatible condensers and large cylindrical glassware
- Suitable holding diameter listed as 100 to 125 mm
- Supplied with 12 inch rod as listed
- Useful for distillation, reflux and condenser support arrangements
- Suitable for retort stand and laboratory frame assemblies
- Practical clamp for school, university and research laboratories
- Helps support larger glassware during compatible laboratory workflows
- Confirm rod diameter, bosshead fit and clamp opening before use
- Do not overtighten onto glassware
- Clamp only, stand and bosshead are not included unless specified
- Use under appropriate laboratory or educational supervision
AUD 30.50 (Ex GST)
Special Price
Hempel Distillation Column Plain BORO 3.3 Borosilicate Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Plain Hempel column designed for smooth vapour rise and consistent separation
- Ideal for general distillation, solvent purification and teaching labs
- High clarity BORO 3.3 glass for thermal stability and chemical resistance
- Compatible with standard ground glass joints for easy system integration
- Reliable performance for research, education and routine lab workflows
- Made from LabChoice BORO 3.3 glass, high quality
From AUD 24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.