Immersion Heater for Calorimeter Block Heating
AUD 62.50(Ex GST)
AUD 62.50(Ex GST)
- Immersion heater for compatible calorimeter blocks
- Designed for laboratory and educational calorimetry experiments
- Rated at 12 V and 50 W as listed
- Heater dimensions listed as 100 × 11.9 mm
- Lead length listed as 820 mm
- Compatible with TECHNOS calorimeter blocks as listed
- May not be compatible with all calorimeter blocks
- Check heater dimensions before purchasing
- Useful for heating metal calorimeter blocks in physics experiments
- Confirm power supply compatibility before use
- Immersion heater only, calorimeter block and power supply are not included
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Immersion Heater for Calorimeter Blocks, also known as a calorimeter block heating element, is designed for use with compatible calorimeter blocks in laboratory and educational experiments. This heater is rated at 12 V, 50 W, supporting controlled heating in approved calorimetry and specific heat capacity investigations. The heater body dimensions are listed as 100 × 11.9 mm, with a lead length of 820 mm, so users should check block hole size, insertion depth and cable routing before ordering or use.
The heater is listed as compatible with TECHNOS blocks, but it may not be compatible with all calorimeter blocks. Dimensions should be checked carefully before purchasing. This product is useful for school science laboratories, university teaching laboratories and physics classrooms performing calorimetry demonstrations, heat transfer experiments and thermal energy calculations. Users should confirm the power supply voltage, current capacity, block compatibility, experiment method and supervision requirements before use. This heater should be used only with a suitable 12 V laboratory power supply. Do not connect to mains electricity, exceed the rated power, operate with damaged leads or use in an incompatible setup.
The heater and calorimeter block may become hot during use. Allow sufficient cooling time before handling and keep leads away from hot surfaces where practical. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the 12 V immersion heater only. Calorimeter block, power supply, thermometer, leads, insulation, balance, timer, PPE and additional accessories are not included unless specified separately.
LabChoice Australia supplies Immersion Heaters and calorimetry accessories for school science laboratories, university teaching laboratories and educational facilities requiring practical equipment for heat and thermal physics experiments.
Sun Sensitive Paper Pack with Acrylic Sheet, 13 x 18 cm, Pack of 40
AUD 44.90(Ex GST)
Air Track Stop Block Screw and Nut for Attachment
AUD 2.90(Ex GST)
Warming Coil Septa Support Adapter, BORO 3.3 Glass - Each
AUD 9.90(Ex GST)
Wave Demonstration Spring, Expanding Plastic Model for Classroom Physics
AUD 27.50(Ex GST)
LED Digital Dry Bath with Choice of 1 Heating Block, up to 120°C
AUD 633.50(Ex GST)
Digital Wine Refractometer, 0 to 45% Brix, 0 to 22% VOL
AUD 549.50(Ex GST)
Electronic Titrator with Touchscreen and Data Traceability
From AUD 2,857.00 (Ex GST)
Block for Epp Tubes
From AUD 255.00 (Ex GST)
Glass Stirring Rods with Paddle End, Pack of 10
From AUD 11.50 (Ex GST)
You May Also Need
Brass Bar and Gauge Apparatus with Insulating Handle
AUD 47.50(Ex GST)
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From AUD 62.50 (Ex GST)
Classic Mechanical Equivalent of Heat (J) Apparatus
AUD 530.90(Ex GST)
Compound Bar, 2-Metal Riveted, with Wooden Handle
AUD 16.50(Ex GST)
Convection in Air Apparatus- Mine Shaft Apparatus
AUD 72.50(Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From AUD 26.50 (Ex GST)
Cylindrical Lenses, Plano Concave and Plano Convex Optics
From AUD 29.90 (Ex GST)
Heat Conductivity Rods, 300 × 6 mm, Individual Metals and Set of 4
From AUD 12.50 (Ex GST)
Hodson Light Box and Optical Set, 12 V
From AUD 190.50 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
AUD 9.90(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
AUD 422.50(Ex GST)
Steam-Heated Linear Expansion Apparatus with Dial Gauge Indicator
AUD 322.50(Ex GST)
Thermal Conductivity Bars
AUD 34.90(Ex GST)
Wooden V-Groove Lens and Mirror Holders, 50 mm and 75 mm
From AUD 6.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
TOP RATED PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab