Inoculating Loops, 3 mm, Ni/Cr Wire, Pack of 10
- Inoculating loops for microbiology workflows
- Loop diameter listed as 3 mm
- Made from Ni/Cr wire
- Supplied as a pack of 10 pieces
- Designed for use with LC-80-BI0973-01 inoculating loop holder
- Used for retrieving and transferring inoculum
- Suitable for plate streaking and smear preparation activities
- Useful for microbiology teaching and laboratory demonstrations
- Holder is sold separately
- Use under appropriate laboratory or educational supervision
AUD 14.90 (Ex GST)
Save 32%
Iodine Flask with Ground Glass Stopper, Borosilicate Glass (BORO 3.3)
- Ground glass stopper provides airtight closure
- Ideal for iodine titration and volatile storage
- Conical shape minimizes vapor loss effectively
- Used in chemical analysis and iodine value tests
- Common in research, education, and industry labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Iodine Test Paper, Vial of 100 Strips
- Iodine test paper for laboratory and educational use
- Supplied as a vial of 100 strips as listed
- Detects iodine in compatible solutions
- Reading increments listed as 0, 12.5, 25 and 50 ppm
- Colour comparison indicates approximate iodine strength
- Test method requires 60 seconds contact time as listed
- Strip should be compared while still wet
- Useful for chemistry and sanitation-related demonstrations
- Disinfection range referenced between 12.5 ppm and 25 ppm
- Precision Laboratories disclaimer states not for medical device use
- Not intended to diagnose, treat, cure or prevent medical conditions
- Use under appropriate laboratory or educational supervision
AUD 19.90 (Ex GST)
Iron Filings for Magnetic Field Experiments
- Iron filings for magnetic field experiments and demonstrations
- Suitable for school, university and teaching laboratory use
- Used to visualise magnetic field patterns around magnets
- Available as 100 g in screw top bottle
- Available as 500 g bulk pack
- Practical material for physics and magnetism activities
- Supports qualitative demonstrations of magnetic field lines
- Suitable for use with bar magnets, horseshoe magnets and magnetic field boards
- Store securely after use to reduce spillage and contamination
- Wear appropriate safety glasses and gloves when handling
- Keep away from eyes, mouth, sensitive electronics and magnetic storage media
- Use under appropriate laboratory or educational supervision
From AUD 7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Iron Funnel Holder on Stand, Four-Place Laboratory Type
- Four-place funnel holder supports up to four compatible funnels at one time
- Iron stand design provides stable support for routine laboratory use
- 500 mm rod supports adjustable height positioning during setup
- 23 mm hole diameter suits compatible laboratory funnel stems
- Space-saving structure helps organise funnel setups on the laboratory bench
- Suitable for filtration, liquid transfer and classroom chemistry practicals
- Designed for laboratory and educational use under appropriate supervision
AUD 41.50 (Ex GST)
Iron Slotted Weights and Hanger
- Heavy iron slotted weights for laboratory and education use
- Available as 0.5 kg and 1 kg individual slotted weights
- 1 kg iron slotted hanger available separately
- 0.5 kg weight made from cast iron with black hammer tone paint finish
- 0.5 kg weight measures approximately 80 mm diameter × 35 mm high
- 0.5 kg weight includes 10 mm wide slot
- 0.5 kg weight accuracy listed as ±5%
- 1 kg slotted weight measures approximately 95 mm diameter × 30 mm high
- 1 kg slotted weight tolerance listed as 1%
- 1 kg hanger measures approximately 440 mm high × 90 mm base × 9.5 mm rod
- 1 kg hanger is designed to take 9 × 1 kg slotted weights
- Use under appropriate laboratory or educational supervision
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed Coil Condenser BORO 3.3 Chemistry Grade
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High-efficiency vapour cooling with internal glass coil and full water jacket
- Extended condensation surface ideal for continuous reflux and high-boiling solvents
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438 Type I, Class A
- Excellent resistance to thermal shock, acids and organic solvents
- Smooth vapour flow and clean condensate return for reproducible results
- Interchangeable ground glass joints for easy integration with standard lab setups
From AUD 137.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed Round Bottom Double Wall Flask For Distillation BORO 3.3
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Double walled jacket design for controlled heating or cooling
- Round bottom shape supports uniform heat distribution during distillation
- Made from BORO 3.3 glass meeting ISO 3585 and ASTM E438 standards
- Ideal for fractional distillation, solvent recovery and essential oil processing
- Precision ground joint ensures secure, leak free system integration
- Reliable performance with circulating baths for accurate temperature control
From AUD 699.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed west Condenser BORO 3.3 Chemistry Grade
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Jacketed West condenser for compatible chemistry glassware setups
- Made from BORO 3.3 chemistry grade glass
- Available in 200 mm, 300 mm and 400 mm length options
- Joint options include 19/26, 24/29 and 24/40
- Jacketed design supports circulating coolant during operation
- Suitable for controlled condensation in compatible laboratory assemblies
- Confirm length, joint size, tubing fit and application suitability before use
From AUD 79.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
JAVAC Vacuum Pump, 2 Stage Oil Rotary Vane for Refrigeration and Air Conditioning
- JAVAC vacuum pump for laboratory, service and educational use
- JAVAC brand VCL 452 as listed
- 2-stage oil rotary vane vacuum pump
- Free air displacement listed as 45 L/min
- Ultimate vacuum listed as 15 micron
- 230 V, 50 Hz power supply as listed
- R32 and 1234yf compliant as listed
- Includes ballast valve
- Anti-oil demister helps prevent oil spillage
- Tri-connector suits 1/4", 3/8" and 5/16" SAE connections
- 12 months manufacturer’s warranty as listed
- Use under appropriate laboratory or educational supervision
AUD 475.90 (Ex GST)
Jointed Powder Funnel, BORO 3.3 Glass
- BORO 3.3 borosilicate glass powder funnel with ground joint for leak-reduced transfers
- Designed for clean, controlled pouring of powders and granules into jointed glassware
- Jointed connection helps minimise spillage and product loss during charging
- Chemically resistant, smooth glass surface for easier cleaning between samples
- Suitable for teaching labs, research labs, and general chemical handling workflows
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
- Joule’s calorimeter assembly for electrical heating experiments
- Includes 50 × 75 mm copper calorimeter cup, diameter × height
- Fitted with Joule’s insert for water-based calorimetry work
- Insert includes calorimeter lid and stirrer
- Includes 2 × 4 mm spin-free socket head IEC terminals
- Conducting rods support a 2 ohm resistance heating coil
- Designed for measuring electrical energy used to heat water
- Often used with Insulating Box and Lid LC-80-HL0830-001
- Suitable for supervised school and teaching laboratory experiments
AUD 69.90 (Ex GST)
Jumbo Concave and Convex Mirror for Light Reflection Experiments
- Jumbo concave/convex mirror for optics demonstrations
- Large 600 mm diameter mirror as listed
- Suitable for reflection and image formation experiments
- Focal length listed as 3.95 metres
- Useful for teaching concave and convex mirror behaviour
- Supports demonstrations of real and virtual images
- Practical visual aid for classroom physics and optics lessons
- Protective film should be removed before use
- Suitable for school, university and teaching laboratory use
- Confirm mounting method and demonstration distance before use
- Handle carefully to avoid surface damage
- Use under appropriate laboratory or educational supervision
AUD 205.50 (Ex GST)
Junior Atomic Model Set, 37 Lugs and 75 Balls
- Junior atomic model set for introductory science learning
- Includes 37 connecting lugs as listed
- Includes 75 balls of different colours and sizes
- Supplied packed in a moulded box
- Plastic case format as listed
- Suitable for basic atomic and molecular structure demonstrations
- Useful for classroom activities and student model building
- Helps students visualise atoms, links and simple structures
- Practical junior set for school and educational use
- Confirm syllabus level and model application before use
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 64.50 (Ex GST)
Junior Electricity Lab Kit with 24 STEM Activities
- Junior Electricity Lab Kit designed for hands-on electricity experiments and STEM education
- Includes components and an experiment manual supporting 24 practical electricity activities
- Suitable for investigating electrical circuits, resistance, electromagnetism and energy conversion
- Supplied with four 1.5 V cell holders and four MES bulb holders
- Includes six 2.5 V lamp bulbs and six 3.8 V lamp bulbs for electrical circuit experiments
- Features two SPST knife switches and one SPDT knife switch for circuit control demonstrations
- Includes a 10 Ω rheostat for investigating variable electrical resistance
- Equipped with a 1.5–3 V electric motor, 4.5–6 V buzzer and 4.5–6 V heater
- Contains a magnetic compass, iron nails and connecting wire for electromagnetism experiments
- Supplied with a perforated baseboard for arranging electrical components
- Includes crocodile clip leads, 4 mm plug leads, PVC-coated connecting wire and additional accessories
- Suitable for secondary schools, STEM classrooms and educational physics laboratories
AUD 199.50 (Ex GST)
Kamifusen Paper Balloons, Class Activity Ice-Breaker - Pack of 10
- Kamifusen paper balloons supplied as a pack of 10 pieces
- Fun hands-on classroom activity for group participation
- Inflate by bouncing from hand to hand or person to person
- Encourages inquiry using the prompt question, “How does this happen?”
- Supports discussion of air trapping, pressure, motion and rebound
- Lightweight paper construction for supervised educational activities
- Suitable for classroom engagement, ice-breakers and science discussion
AUD 42.50 (Ex GST)
Keck Clips for Glass Joints, Durable Plastic Clamps for Glass Ground Joints, High Quality
- Securely holds glass joints in place
- Made from heat-resistant, durable plastic
- Compatible with standard taper ground joints
- Prevents joint separation during experiments
- Used in distillation, reflux, and lab setups
- Supplied by LabChoice Australia – Reliable fit
From AUD 2.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Key Press Contact Switch, Silver-Plated Contact Points
- Press type contact key for basic circuit experiments
- Classical switch for making and breaking electrical circuits
- Circuit is made only when the key is pressed down
- Silver plated contact points as listed
- Strong phosphor bronze spring blade as listed
- IEC 4 mm socket spin-free head terminals as listed
- Designed for long classroom service life
- Suitable for low-voltage electricity demonstrations
- Useful for physics and general science practicals
- Practical switch for student circuit work
- Do not connect to mains electricity
- Use under appropriate laboratory or educational supervision
AUD 28.90 (Ex GST)
Kidney Anatomy Model, Bench Top Teaching Display on Stand
- Biological kidney model for anatomy and biology teaching
- Supplied on stand as listed
- Suitable for classroom demonstrations and student learning
- Useful for explaining kidney structure and function
- Helps visualise renal anatomy in biology lessons
- Size listed as 240 mm high × 125 mm wide
- Weight listed as 480 g
- Practical display model for school and university laboratories
- Suitable for health science, biology and human anatomy education
- Confirm model detail and labelled parts before ordering
- Model only, worksheets and teaching charts are not included
- Use under appropriate laboratory or educational supervision
AUD 99.90 (Ex GST)
Kimtech Disposable Wipes, Delicate Lab Task Wipes
- Kimtech disposable wipes designed for delicate laboratory cleaning and handling tasks
- Low lint performance helps support cleaner wiping of sensitive surfaces and instruments
- Soft, non abrasive texture suitable for glassware exteriors, lenses, and lab equipment surfaces
- Good absorbency for quick wipe-downs, small spills, and routine bench cleaning
- Single use format helps reduce cross contamination between samples and work areas
- Convenient for laboratories, research benches, QC areas, and classroom science settings
- Easy to dispense for fast, consistent use during repetitive lab tasks
- Practical consumable for hygienic housekeeping and controlled cleaning workflows
From AUD 9.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kimwipes Heavy Duty Barrel Roll, 21.5cm x 300 Meters, 4 Rolls/Carton
- Heavy-duty barrel roll for laboratory and general wiping use
- Brand listed as Kimberly Clark
- Supplied as 4 rolls per carton as listed
- Roll length listed as 300 meters
- Product title lists roll width as 21.5 cm
- Bill of materials references 4 × ASFT66070L Sofeel centrefeed pull paper towel
- BOM specification lists 1-ply paper towel
- BOM specification lists 200 mm × 300 m roll size
- Non-perforated roll format as listed
- Biodegradable as listed
- HACCP certified as listed in the BOM description
- Confirm exact brand, width and product identity before final catalogue upload
AUD 131.00 (Ex GST)
Kipp’s Dispenser Head, Tilting Glass Type, BORO 3.3 - Each
- Tilting glass head for compatible Kipp’s apparatus and gas setups.
- Made from BORO 3.3 borosilicate glass for lab durability.
- Supports controlled dispensing during chemistry applications.
- Suitable for gas generation, demonstrations and teaching labs.
- Smooth glass surface supports easy inspection and cleaning.
- Designed for routine use in chemistry and research laboratories.
From AUD 24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kipps Gas Generator Apparatus, Borosilicate Glass
- Kipp’s gas generator apparatus manufactured from borosilicate glass for laboratory use
- High chemical resistance and thermal stability suitable for common gas generating reactions
- Classic three chamber design for controlled, on demand gas production
- Transparent glass construction allows clear visual monitoring of reactions
- Smooth ground glass joints for secure assembly and reliable operation
- Ideal for educational laboratories, teaching demonstrations, and routine chemical experiments
- Supplied by LabChoice Australia, trusted specialists in laboratory glassware and equipment
From AUD 149.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kipps Gas Generator Apparatus, Polyethylene
- Polyethylene Kipp’s gas generator apparatus for safe, controlled laboratory gas generation
- Chemical resistant PE construction, suitable for common laboratory reagents
- Three chamber design enables on-demand gas production and automatic shut-off
- Lightweight, impact resistant, and non-breakable alternative to glass systems
- Easy to assemble, clean, and maintain for routine laboratory use
- Ideal for educational laboratories, teaching demonstrations, and basic research applications
- Supplied by LabChoice Australia, trusted laboratory equipment specialists
From AUD 59.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kjeldahl Digestion Flask Borosilicate Glass
- Designed specifically for Kjeldahl digestion in nitrogen and protein analysis workflows
- Flask shape supports controlled boiling and efficient mixing during acid digestion
- Suitable for use with concentrated sulphuric acid and digestion catalysts under high heat
- Compatible with standard Kjeldahl digestion and distillation systems used in laboratories
- Ideal for schools, universities, food testing, environmental analysis, and quality control labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 15.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kjeldahl Digestion Flask Jointed BORO 3.3 Glass
- Jointed Kjeldahl digestion flask designed for secure connection to condensers and digestion assemblies
- Ideal for Kjeldahl nitrogen and protein analysis in analytical and teaching laboratories
- Jointed neck ensures leak resistant, stable setup during high temperature acid digestion
- Flask shape promotes controlled boiling and efficient mixing with sulphuric acid and catalysts
- Suitable for schools, universities, food testing, environmental and quality control laboratories
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 16.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kolle Type Needle Holder with Chuck Jaws
- Kolle type needle holder for laboratory microbiology use
- Fitted with chuck jaws as listed
- Designed to hold compatible inoculating needles or wires
- Useful for microbiology teaching and culture handling demonstrations
- Supports controlled handling of compatible loops, needles or wire tips
- Suitable for school, university and teaching laboratory use
- Practical accessory for routine microbiology setup
- Confirm needle, loop or wire compatibility before use
- Needle holder only, inoculating needles are not included unless specified
- Clean and sterilise according to approved laboratory procedure
- Use care with flame, hot metal and biological samples
- Use under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
Kundt’s Tube Apparatus with Microphone and Speaker
- Kundt’s apparatus for laboratory and educational use
- Designed for the study of sound and waves
- Useful for standing wave, resonance and tone demonstrations
- Transparent resonance tube as listed
- Tube size listed as 50 mm diameter × 800 mm length
- Includes 800 mm metric scale as listed
- Includes 2 side holes with sliding shutters
- Includes adjustable piston for resonance experiments
- Includes miniature microphone that can be passed up the tube
- Includes mini-speaker that fits to one end of the tube
- Requires compatible signal generator to run the equipment
- Use under appropriate laboratory or educational supervision
AUD 439.50 (Ex GST)
L-Shaped Connectors, Polypropylene for Laboratory Tubing
- Polypropylene L-shaped connectors designed for laboratory tubing connections
- Manufactured by PolyLab for laboratory fluid transfer applications
- 90° elbow design connects two tubing sections at a right angle
- Available in 6 mm, 8 mm and 10 mm sizes for different tubing requirements
- Manufactured from durable, lightweight polypropylene (PP)
- Chemical-resistant construction suitable for compatible laboratory liquids
- Designed to provide secure, leak-resistant connections when correctly fitted
- Helps redirect liquid flow without sharply bending or kinking flexible tubing
- Suitable for laboratory liquid circulation and fluid transfer systems
- Available in pack quantities of 12, 24 and 36 pieces
- Ideal for chemistry, research, industrial and educational laboratories
From AUD 8.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
L-Shaped Spreader, Sterile Polypropylene
- PolyLab L-Shaped Spreader for microbiology and laboratory applications
- Manufactured from durable polypropylene (PP) material
- Supplied sterile as specified for microbiological procedures
- Smooth spreading surface helps distribute liquid samples evenly
- L-shaped design provides controlled movement across agar surfaces
- Suitable for spreading bacterial cultures and biological suspensions
- Helps minimise clumping and uneven sample distribution
- Designed to reduce damage to solidified agar media during spreading
- Useful for microbiology, cell culture research and laboratory teaching
- Suitable for spread plate techniques and microbial colony isolation
- Ideal for university, research, biotechnology and microbiology laboratories
AUD 1.00 (Ex GST)
Lab Coat, Full Sleeve Protective 100% Cotton
From AUD 30.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Hot Plate with Simmerstat Temperature Control
- General-purpose laboratory hot plate for heating applications
- 240 V AC mains operation with 600 W heating power
- Rectangular heating surface measuring 200 × 180 mm
- High-temperature alloy plate for even heat distribution
- Infinitely adjustable Simmerstat control from LO to HI
- Maximum plate temperature of approximately 420°C at HI setting
AUD 580.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.