Daniell Cell, 125 × 75 mm, with Support and Terminal
- Daniell cell apparatus for electrochemistry demonstrations
- Outer copper vessel listed as 125 × 75 mm
- Copper vessel includes perforated shelf and terminal
- Includes porous pot listed as 150 × 50 mm
- Includes zinc rod listed as 125 × 12 mm
- Supplied with support and terminal
- Suitable for teaching redox reactions and galvanic cell principles
- Useful for demonstrating electron flow from zinc to copper
- Designed for laboratory or educational settings only
- Confirm required chemicals and circuit accessories before use
- Use under appropriate laboratory or educational supervision
AUD 54.90 (Ex GST)
Davies Double Surface Condenser BORO 3.3 for Efficient Reflux
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Dual-surface cooling design provides superior condensation efficiency
- Ideal for high-vapour-load reflux, distillation, and solvent purification
- BORO 3.3 glass construction ensures excellent thermal and chemical resistance
- Works effectively with lower water flow rates for energy-efficient cooling
- Precision-ground interchangeable joints fit standard laboratory glassware
- Manufactured to ISO 3585 and ASTM E438 Type I, Class A glass standards
From AUD 64.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
DC Amplifier for Franck Hertz Apparatus
- DC amplifier for laboratory and educational use
- Originally designed for old Franck Hertz apparatus LC-80-AP1870-001
- Amplifies very small currents for display on a student bench meter
- Now used as a microamp to milliamp amplifier as listed
- Suitable for general high-gain amplification applications
- Gain listed as close to 1000:1
- Generally converts microamps of current into milliamps
- Input voltage must exceed 0.6 V as listed
- Powered by internal 9 V #216 dry cell
- No on/off switch as listed
- Current is drawn only when used as an amplifier
- Use under appropriate laboratory or educational supervision
AUD 124.50 (Ex GST)
DC Smoothing Unit Power Supply, Up to 8 Amp
- DC smoothing unit for laboratory and education use
- Designed for use with unfiltered DC power supply outputs
- Converts compatible unfiltered DC output into smoother DC
- Current capacity listed up to 8 Amp DC
- Uses capacitors and a choke for effective DC filtering
- Useful with power supplies that provide full-wave rectified but unfiltered DC
- Suitable for physics, electronics and circuit demonstrations
- Helps support experiments requiring smoother DC than a basic rectified output
- Confirm power supply output, current rating and circuit suitability before use
- Use under appropriate teacher or laboratory supervision
AUD 120.90 (Ex GST)
Decision Reaction Timer Device for Response Time Testing
- IEC reaction timer for measuring human response time
- Measures response to large LED light or beeper sound
- Large LED can illuminate red or green
- Random unpredictable delay from 10 to 90 seconds as listed
- Can be initiated by a second person or by the person being tested
- Operates with LED only, beeper only or LED and beeper together
- Supports single decision testing and dual decision testing
- Includes 2 press buttons as listed
- Press button cables are 1 m long as listed
- Can be arranged as a driving reaction timer demonstration
- Requires suitable power supply and compatible digital timer
- Use under appropriate laboratory or educational supervision
AUD 253.90 (Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
- Deflagrating spoon for supervised combustion and gas reaction demonstrations
- 300 mm long handle supports safer lowering into compatible glass vessels
- Stainless steel cup provides a practical sample-holding section
- Flange cap and cover support controlled placement during demonstrations
- 60 mm cover diameter as stated in the supplied specification
- Used for demonstrating deflagration in gas-filled vessels
- Suitable for laboratory and educational use under strict supervision
AUD 10.90 (Ex GST)
Deflagrating Spoons with Aluminium Cap
- Classical pattern deflagrating spoon for laboratory demonstrations
- Available with brass cup or iron cup options
- Aluminium cap designed to cover the mouth of a compatible gas jar
- Deep drawn cup at the end of the rod
- Smoothly rounded cup design as listed
- Cork stopper in the cap supports the rod
- Suitable for approved combustion and gas jar demonstrations
- Useful for school, university and teaching laboratory use
- Practical apparatus for chemistry demonstrations
- Confirm gas jar size, cup material and experiment method before ordering
- Deflagrating spoon only, gas jar and reagents are not included
- Use under appropriate laboratory or educational supervision
From AUD 16.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Demonstration Meter for Electrical Experiments, Without Scale
- Demonstration meter for laboratory and educational use
- Supplied without scale as listed
- Scales must be purchased separately
- Sensitivity listed as 5 mA / 100 mV
- Product size listed as 26 × 32 × 9.5 cm
- Suitable for classroom electrical demonstrations
- Useful for showing current or voltage readings with compatible scales
- Large demonstration format supports student visibility
- Designed for use with suitable low-voltage circuits
- Confirm compatible scale range before ordering
- Do not connect to mains electricity
- Use under appropriate laboratory or educational supervision
AUD 149.50 (Ex GST)
Density Ball Sets, 25 mm, Set of 6 and 12
- Density ball sets for sink or float demonstrations
- Ball diameter listed as 25 mm
- Available as set of 6 or set of 12
- Set of 12 includes 2 each of steel, brass, wood, aluminium, lead and cork
- Set of 6 includes wood, aluminium, steel, copper, plastic and brass
- Supports mass, volume, density and specific gravity teaching
- Useful for water displacement and density calculation activities
- Helps compare materials with similar size but different mass
- Suitable for school physics, chemistry and general science lessons
- Lead-containing set must be handled with appropriate supervision and PPE
- Supplied as the selected density ball set only
- Use under appropriate laboratory or educational supervision
From AUD 40.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
- Density cube set for physics and general science education
- Supplied as a set of 6 cubes
- Each cube has a listed 1.0 cm edge length
- Materials include aluminium, brass, copper, lead, zinc and iron
- Supplied in a plastic box for storage
- Designed for density experiments and material comparison activities
- Supports mass, volume and density calculation workflows
- Consistent cube geometry helps simplify volume determination
- Useful for comparing different metal materials
- Some cubes may rust over time if stored in damp conditions
- Lead cube should be handled carefully with suitable hygiene procedures
- Use under appropriate laboratory or educational supervision
AUD 18.90 (Ex GST)
Density Cube Set, 2.0 cm, 7 Cubes with Hooks
- Density cube set for physics and science education
- Includes 7 cubes with hooks
- Each cube has a listed 2.0 cm edge length
- Materials include iron, aluminium, zinc, lead, copper, brass and tin
- Supports mass, volume and density calculation activities
- Useful for comparing density across different metals
- Hooks support suspension during approved density experiments
- Suitable for density, buoyancy and material property demonstrations
- Practical resource for school and university teaching laboratories
- Lead cube should be handled carefully with suitable hygiene procedures
- Intended for laboratory or educational settings only
- Use under appropriate teacher or laboratory supervision
AUD 80.90 (Ex GST)
Density Cube Sets, 2.0 cm and 2.5 cm, in Case
- Density cube sets for physics and general science education
- Designed for density, buoyancy and material comparison experiments
- Available as 2.0 cm set of 9 cubes and 2.5 cm set of 12 cubes
- Both sets are supplied in a case
- 2.0 cm set includes aluminium, copper, brass, steel, cork, lead, zinc, plastic and hardwood
- 2.5 cm set includes metals, plastics and wood materials for wider comparison
- Supports mass, volume and density calculation activities
- Consistent cube geometry helps simplify volume determination
- Useful for comparing material properties across different sample types
- Selected 2.5 cm cubes are marked or stamped Al, Fe, Br and Cu
- Lead cube should be handled carefully with suitable hygiene procedures
- Use under appropriate laboratory or educational supervision
From AUD 67.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
- Density cube sets for physics and science education
- Supplied as sets of 5 cubes
- Available in 2.0 cm and 2.5 cm edge sizes
- Materials include aluminium, brass, copper, iron and lead
- Supplied in polybag
- Supports mass, volume and density calculation activities
- Useful for comparing density across different materials
- Consistent cube geometry helps simplify volume determination
- Suitable for density, buoyancy and material property demonstrations
- Practical resource for school and university teaching laboratories
- Lead cube should be handled carefully with suitable hygiene procedures
- Use under appropriate laboratory or educational supervision
From AUD 37.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Density Cubes, 1.0 cm Edge, Individual General Purpose Cubes
- General purpose density cubes for laboratory and educational use
- Each cube has a listed 1.0 cm edge length
- Available as individual material options
- Materials include aluminium, brass, copper, iron, lead, tin, wood and zinc
- Suitable for density comparison activities
- Supports mass, volume and density calculation experiments
- Useful for comparing different materials under the same cube volume
- Suitable for buoyancy and material identification demonstrations
- Practical spare or replacement cubes for classroom density sets
- Suitable for school, university and teaching laboratory use
- Lead cube should be handled carefully with suitable hygiene procedures
- Use under appropriate laboratory or educational supervision
From AUD 1.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Density Cubes, 2 cm Spare Cubes for Density Experiments
- General purpose spare density cubes for physics and materials science education
- Each cube has a listed 2.0 cm edge length
- Supports mass, volume and density calculation activities
- Consistent cube geometry helps simplify volume determination
- Useful for comparing density across different materials
- Suitable for density, buoyancy and material property demonstrations
- Available materials include aluminium, brass, copper, iron, lead, wood and zinc
- Provides a wide density spread for classroom comparison
- Suitable for school, university and teaching laboratory use
- Lead cube should be handled carefully with suitable hygiene procedures
- Use under appropriate laboratory or educational supervision
From AUD 3.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Density Cubes, 2.5 cm, Individual General Purpose Cubes
- General purpose density cubes for laboratory and educational use
- Each cube is listed as 2.5 cm
- Available as individual material options
- Materials include aluminium, brass, copper, iron, lead and wood
- Suitable for density comparison activities
- Supports mass, volume and density calculation experiments
- Useful for comparing different materials under the same cube size
- Suitable for buoyancy and material identification demonstrations
- Practical spare or replacement cubes for classroom density sets
- Suitable for school, university and teaching laboratory use
- Lead cube should be handled carefully with suitable hygiene procedures
- Use under appropriate laboratory or educational supervision
From AUD 4.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Density Hydrometer Kit with Measuring Cylinder and Thermometer, 800 to 850 kg/m³
- Diesel hydrometer kit range for measuring diesel fuel density
- Used to assess specific gravity, fuel consistency and quality control checks
- Hydrometer range listed as 800 to 850
- Suitable for industrial, automotive, fuel testing and laboratory applications
- Class A kit includes calibrated and certified Class A hydrometer
- Class A kit includes calibrated and certified 250 mL Class A measuring cylinder
- Class B kit includes diesel density hydrometer and 250 mL Class B measuring cylinder
- Measuring cylinders are made from BORO 3.3 glass
- Thermometer range listed as 0 to 360°
- Use under appropriate laboratory supervision with approved fuel handling procedures
From AUD 69.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Desiccator Jar With Lid Plain, Die Presses Neutral Glass, High Quality Laboratory Grade
- Neutral glass desiccator jar for low-humidity laboratory storage
- Plain lid supports covered desiccation and protected sample storage
- Die-pressed glass construction provides uniform wall thickness
- Suitable for drying, cooling, storing and protecting sensitive materials
- Clear glass body allows easy viewing of stored samples and contents
- Useful for hygroscopic powders, filter papers, crucibles and reagents
- Suitable for analytical, academic, research and QC laboratory workflows
From AUD 132.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Desiccator Vacuum Type with Lid, Neutral Glass, High Quality, Heavy Duty
- Heavy duty neutral glass vacuum desiccator for moisture-sensitive storage
- Suitable for drying, desiccation and reduced-pressure laboratory workflows
- Precision fitted lid supports vacuum sealing when correctly used
- Thick die-pressed neutral glass construction supports routine durability
- Clear glass body allows easy viewing of stored samples and materials
- Suitable for crucibles, weighing boats, reagents and humidity-sensitive items
- Used in chemistry, research, QC, pharmaceutical and materials laboratories
From AUD 167.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Diamond Tip Pencil for Glass Writing
- Diamond tip pencil designed for permanent marking and writing on glass surfaces
- Hard diamond point creates fine identification marks by scratching the glass surface
- Suitable for marking laboratory glassware and microscope slides
- Pencil-style design allows controlled manual marking
- Useful for writing sample numbers, identification codes and reference markings
- Creates permanent etched marks without using ink or adhesive labels
- Suitable for marking plain, non-frosted microscope slides
- Reusable laboratory marking tool for routine glass identification
- Ideal for chemistry, biology, microscopy, research and educational laboratories
AUD 22.50 (Ex GST)
Diffraction Grating Card, Classroom Spectrum Comparison Holder
- Mounted diffraction grating for laboratory and educational use
- Demonstrates diffraction grating principles
- Shows how grating behaviour depends on line density
- Includes 100, 300 and 600 lines/mm grating replicas
- Mounted in a card frame as listed
- Card mount dimensions listed as 90 × 30 × 2.5 mm
- Three apertures allow comparison of different grating spacings
- Useful for light, optics and wave demonstrations
- Suitable for classroom experiments with approved light sources
- Helps demonstrate diffraction, spectra and wavelength separation
- Avoid direct viewing of the sun, lasers or intense light sources
- Use under appropriate laboratory or educational supervision
AUD 68.50 (Ex GST)
Digi-Pak Power Supply, 2 to 12 V Switched and 1 to 16 V Regulated DC
- Digi-Pak classroom power supply for laboratory and education use
- Includes switched AC and DC outputs from 2 to 12 V
- Adds regulated smooth DC output from 1 to 16 V DC
- Regulated DC output current listed up to 3 A max
- Smooth DC output is suitable for many electronic experiments
- Red LED digital display monitors the regulated DC output
- Regulated output helps maintain set voltage under changing load conditions
- Useful upgrade from standard school workhorse-style power supplies
- Suitable for physics, electronics and low-voltage circuit practicals
- Use under appropriate teacher or laboratory supervision
AUD 554.90 (Ex GST)
Digital AC Ammeter LCD, 0 to 20 A, Auto Power Off
- Digital AC ammeter for classroom current measurement demonstrations
- Measures from 0.00 to 19.99 A AC
- 10 mA resolution supports practical classroom readings
- Powered by a standard 9 V battery for convenient bench use
- Low battery alarm displays before battery replacement is required
- Auto power off after 20 minutes helps protect battery life
- Over-range red LED illuminates if the 20 A AC rating is exceeded
AUD 183.50 (Ex GST)
Digital AC Voltmeter LCD, 0 to 200 V, Auto Power Off
- Digital AC voltmeter for classroom voltage measurement demonstrations
- Measures from 0.00 to 199.9 V AC
- 0.1 V resolution supports practical classroom readings
- Powered by a standard 9 V battery for convenient bench use
- Low battery alarm displays before battery replacement is required
- Auto power off after 20 minutes helps protect battery life
- Over-range red LED illuminates if the 200 V AC rating is exceeded
AUD 183.50 (Ex GST)
Digital Bench Top Abbe Refractometer for Refractive Index Measurement
- Digital bench top Abbe refractometer for refractive index measurement
- Refractive index range listed as 1.3–1.7 R.I.
- Bench top format for stable laboratory placement
- Digital model as listed
- Suitable for laboratory and educational measurement demonstrations
- Useful for optics, chemistry and analytical teaching applications
- Supports refractive index comparison of compatible samples
- Practical instrument for school, university and teaching laboratories
- Confirm sample compatibility before use
- Confirm accuracy, resolution and calibration requirements before ordering
- Refractometer only, standards and accessories are not included unless specified
- Use under appropriate laboratory or educational supervision
AUD 8,050.50 (Ex GST)
Digital Brix Refractometer, 0 to 90%, RI 1.3330 to 1.5177
- Digital Brix refractometer for laboratory and educational use
- Brix measuring range listed as 0.0 to 90.0%
- Refractive index range listed as 1.3330 to 1.5177 nD
- Brix resolution listed as 0.10%
- Brix accuracy listed as ±0.2%
- Refractive index resolution listed as 0.0001 nD
- Refractive index accuracy listed as ±0.0003 nD
- IP65 waterproof rating
- Automatic temperature compensation listed as 10 to 50°C
- Powered by 1.5 V AAA battery, not included
AUD 695.50 (Ex GST)
Digital Colony Counter, LED Display with Pressure Sensor and Ring Lamp
- Digital colony counter for counting bacterial colonies on agar plates
- Model 570 as listed
- Operates on 240 V, 50 Hz power as listed
- Designed with solid state circuitry
- Pressure sensor system provides uniform sensitivity across the working field
- Suitable for agar in different sizes of Petri dishes
- Flexible adjuster accepts 10 cm to 15 cm Petri dishes
- 4-digit counter registers up to 9999 counts
- Bright red LED display for clear count reading
- Beeper confirms each registered count
- Adjustable focusing arm with 1.5× standard lens
- Use under appropriate laboratory or educational supervision
AUD 1,707.90 (Ex GST)
Digital Coulomb Meter, with Collecting Disc for Electric Charge Measurement
- Digital Coulomb meter for laboratory and educational use
- IEC Coulomb Meter as listed
- Behaves like a digital electroscope
- Displays charge digitally instead of using vane deflection
- Plastic housing as listed
- Supplied with collecting disc as listed
- Measures charge deposited into the instrument
- Can be used with current through a resistance
- Can be used with charge from a capacitor
- Can be used with static electricity sources such as a charged plastic rod
- Listed display range references up to 1.999 nC
- Use under appropriate laboratory or educational supervision
AUD 180.90 (Ex GST)
Digital DC Ammeters, Auto Power Off
- Digital DC ammeters for classroom current measurement
- Available in 200 µA, 2 A and 20 A DC range options
- Resolution options include 0.1 µA, 1 mA and 10 mA
- Powered by a standard 9 V battery for convenient bench use
- Low battery alarm displays before replacement is required
- Auto power off after 20 minutes helps protect battery life
- Over-range red LED illuminates if the rated DC range is exceeded
From AUD 148.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Digital DC Voltmeters, Auto Power off
- Digital DC voltmeters for classroom voltage measurement
- Available in 2 V, 20 V and 200 V DC range options
- Resolution options include 1 mV, 10 mV and 100 mV
- 10 MΩ input impedance stated for the voltmeter range
- Powered by a standard 9 V battery for convenient bench use
- Low battery alarm displays before replacement is required
- Auto power off after 20 minutes helps protect battery life
From AUD 148.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Digital Dry Block Heater, Dual Block, 200°C
- Dual block digital dry block heater for laboratory heating workflows
- Accepts 2 standard blocks or 1 compatible 96-well block
- Temperature range from ambient +5°C to 200°C
- 0.1°C digital operation and display indication
- Supports up to 40 × 1.5 mL tubes with suitable blocks
- Can run two different tube block inserts at the same time
- Nitrogen evaporation system available for compatible workflows
AUD 1,532.00 (Ex GST)
Digital Dry Block Heater, Four Block, 200°C
- Four block digital dry block heater for high-capacity workflows
- Accepts 4 standard blocks or 2 compatible 96-well blocks
- Temperature range from ambient +5°C to 200°C
- 0.1°C digital operation and display indication
- Supports up to 80 × 1.5 mL tubes with suitable blocks
- Four individual heaters support dedicated block heating
- Nitrogen evaporation system available for compatible sample concentration
AUD 1,844.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.