Constant Volume Thermometer for Charles’ Law Experiments
- Constant volume thermometer for gas law demonstrations
- Designed for Charles’ Law teaching experiments
- Also demonstrates the pressure and temperature relationship of a gas
- 1 m apparatus length as listed
- Uses a fixed volume of trapped air during the experiment
- Air is heated to a known temperature during the procedure
- Mercury column is adjusted to keep the air volume constant
- Supports accurate classroom investigation of gas behaviour
- Similar in teaching purpose to Boyle’s Law apparatus
- Suitable for school, university and teaching laboratory demonstrations
- Contains or uses mercury, follow strict mercury safety procedures
- Use only under appropriate laboratory or educational supervision
AUD 267.50 (Ex GST)
Constant-Current Capacitor Charging Apparatus with Power Supply
- Charge on capacitor apparatus for laboratory and educational use
- Designed for capacitor charging experiments using constant current
- Allows capacitance value to be calculated from first principles
- Suitable for determining capacitor value in microfarads, µF
- Charging current is adjusted to a very small value as listed
- Set current is held constant during capacitor charging
- Voltage is monitored using a high-impedance digital voltmeter
- Time is checked by the student using a stopwatch
- 9 V battery power source listed as small and convenient
- Typical currents are normally less than 1 mA as listed
- Suitable for electricity, capacitance and circuit practicals
- Use under appropriate laboratory or educational supervision
AUD 126.90 (Ex GST)
Constantan Resistance Wire for Laboratory Electrical Experiments
- Bare Constantan (Eureka) resistance wire designed for laboratory electrical experiments and resistance investigations
- Manufactured from a copper-nickel resistance alloy, listed as approximately 60% copper and 40% nickel
- Available in ten Standard Wire Gauge (SWG) sizes from 18 SWG to 36 SWG
- Suitable for electrical resistance, Ohm's law and temperature coefficient experiments
- Low temperature coefficient of resistance helps maintain relatively stable electrical resistance during temperature changes
- Available in different wire diameters for comparing conductor resistance and cross-sectional area
- 18 SWG variation has a nominal diameter of 1.22 mm
- 18 SWG reference specifications include 0.42 Ω/m resistance and 10.384 g/m mass
- Bare, uninsulated construction suitable for compatible laboratory circuits
- Useful for resistance coils, Wheatstone bridge experiments and electrical measurements
- Listed in 125 g reels across all ten variations
- Ideal for physics, electrical science, research and educational laboratories
From AUD 31.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Convection in Air Apparatus with Chimneys
- Convection in air apparatus for STEM and science demonstrations
- Demonstrates convection as heat transfer in gases
- Shows warm air rising and cooler air moving in to replace it
- Useful for teaching air currents and heat movement
- Includes metal box with acrylic front as listed
- Includes two acrylic chimneys as listed
- Designed for use with a candle heat source during demonstration
- Smoke source is required to visualise air movement
- Air currents can be observed against a dark backdrop as listed
- Relevant to air-conditioning, building fire behaviour and sea breeze concepts
- Acrylic front slides out to access the chimneys as listed
- Use under appropriate laboratory or educational supervision
AUD 72.50 (Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
- Copper calorimeter cup range for teaching calorimetry experiments
- Available in standard small and large size options
- Small cup size listed as 50 × 75 mm, diameter × height
- Large cup size listed as 75 × 100 mm, diameter × height
- Spun from copper sheet for practical classroom laboratory use
- Rolled edge supports safer handling and improved rim durability
- Polished with nickel plated outside finish
- Suitable for compatible calorimeter lids, inserts and insulation accessories
- Supplied as calorimeter cup only
- Confirm required cup size, lid fit and experiment suitability before ordering
From AUD 26.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Copper Gauze Wire Mesh, 40 Mesh for Electrolysis Experiments
- Copper gauze mesh for laboratory and educational use
- 40 mesh copper wire gauze as listed
- Supplied as 300 mm square as listed
- Used in electrolysis experiments as listed
- Suitable for compatible chemistry and physics demonstrations
- Useful for electrode, conductivity and material-property studies
- Flexible copper mesh format for practical laboratory handling
- Can be cut or shaped for approved experimental setups
- Confirm mesh size and wire compatibility before use
- Copper may oxidise or discolour after chemical or heat exposure
- Edges may be sharp after cutting or handling
- Use under appropriate laboratory or educational supervision
AUD 59.90 (Ex GST)
Copper Sheet, 150 × 150 mm, Pack of 8
- Plain raw copper sheets for laboratory and educational use
- Supplied as a pack of 8 pieces for classroom and lab stock use
- Each sheet is cut to 150 × 150 mm square size
- Thickness is stated as 0.36 mm, equivalent to 28 SWG
- Suitable for conductivity, material study and practical science activities
- Useful for cutting, shaping or comparison tasks where copper sheet is required
- Use under appropriate supervision with suitable handling procedures
AUD 77.50 (Ex GST)
Copper Turnings, Fine Technical Grade, 500 g
- Fine copper turnings for laboratory and educational experiments
- Also known as metallic copper shavings for practical chemistry use
- Supplied as a 500 g pack for classroom and laboratory stock use
- High surface area supports suitable reaction and demonstration workflows
- Useful for electrochemistry, displacement and corrosion experiments
- Technical grade material for general laboratory demonstration use
- Handle with PPE and avoid dust, ingestion or inhalation exposure
AUD 87.50 (Ex GST)
Coriolis Force Experiment Apparatus
- Coriolis force experiment apparatus for visually demonstrating how Coriolis force works
- Designed to show how the path of a moving object changes on a rotating body
- Demonstrates the bending direction of water ejected from the built-in tank
- Helps students observe the effect repeatedly during physics teaching and demonstration workflows
- Suitable for explaining motion away from or toward the axis of rotation on a rotating disk or body
- Supports classroom understanding of Coriolis force using a visible water movement demonstration
- Useful for linking physics concepts with real-world examples such as typhoons and low-pressure weather systems
- Helps demonstrate how rotation can affect the apparent direction of moving materials
- Suitable for science classrooms, teaching laboratories and physics education environments
- Setup method, rotation condition, water level and demonstration procedure should be confirmed before use
AUD 212.00 (Ex GST)
Cork Borer Set, Laboratory Hole Punch Tools for Stoppers
- Cork borer sets for laboratory and educational use
- Made from nickel plated brass as listed
- Supplied with rod as listed
- Available in set of 12 and set of 6 options
- Used to cut holes in cork or rubber stoppers
- Supports insertion of compatible glass tubing
- Also suitable for taking samples in approved experiments
- Can be used to punch holes in agar plates as listed
- Set of 12 includes bore sizes from 18.25mm, 16.4mm, 14.2mm, 13.8mm, 12mm, 10.7mm, 9.3mm, 7.6mm, 5.5mm, 5.2mm, 4.9mm, 3.5mm
- Set of 6 includes bore sizes from 8.45mm, 7.5mm, 6.3mm, 4.9mm, 4.0mm, 3.4mm
- Sharp cutting edges require careful handling
- Use under appropriate laboratory or educational supervision
From AUD 22.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cork Borer Sharpener, Chrome Plated Metal
- Cork borer sharpener for laboratory and educational use
- Used for sharpening compatible cork borers
- Chrome plated metal construction as listed
- Helps maintain the cutting edge of cork borers
- Suitable for routine laboratory preparation areas
- Compatible cork borer references include LC-80-LW0537-01 and LC-80-LW0547-01 as listed
- Useful when cork borer edges become dull over time
- Supports cleaner cutting through cork and compatible soft materials
- Practical accessory for chemistry and general science laboratories
- Confirm compatibility with selected cork borer size before use
- Sharp edges may cause cuts if handled incorrectly
- Use under appropriate laboratory or educational supervision
AUD 22.50 (Ex GST)
Cork Ring Support for Round-Bottom Flasks
- Cork ring support for round-bottom flasks
- Also known as a flask base or cork flask ring
- Suitable for supporting round-bottom flasks and dishes
- Made from quality cork as listed
- Well-sanded voids support stable flask positioning
- Parallel sides with concentric bores as listed
- All rings have 30 mm height
- Inside edge has bevelled finish as listed
- Available in multiple sizes for different flask capacities
- Useful for school, university and laboratory glassware handling
- Confirm flask capacity and ring size before ordering
- Use under appropriate laboratory or educational supervision
From AUD 11.40 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cow Distillation Adapter Borosilicate Glass
- Multi-receiver switching adapter designed for continuous distillation and fraction collection
- Made from premium BORO 3.3 glass compliant with ISO 3585 and ASTM E438 Type I Class A.
- Allows rotation between receiving flasks without interrupting the distillation process
- Precision-ground interchangeable joints ensure airtight, vacuum-safe sealing.
- Ideal for solvent purification, organic synthesis, and essential oil distillation
- Durable construction withstands repeated heating, cooling, and vacuum cycles.
From AUD 29.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Crimp Top Chromatography Vials, BORO 3.3
- BORO 3.3 borosilicate glass construction for strong chemical resistance and dependable thermal stability
- Crimp top design supports secure sealing for chromatography sample handling and storage
- Suitable for routine GC and HPLC applications in laboratory and analytical workflows
- Clear vial format helps with easy sample visibility and identification
- Designed for accurate sample preparation, transfer, and autosampler use
- Suitable for research, quality control, and general analytical laboratory testing
- Reliable choice for laboratories requiring consistent chromatography vial performance
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Crookes Radiometer Single for Heat and Light Energy
- Single Crookes radiometer for light and energy demonstrations
- Demonstrates the relationship between heat, light and gas molecular activity
- Shows that light is a form of energy
- Supports discussion of energy conversion in a visible way
- Rotor movement provides a clear classroom observation
- Size listed as 125 mm high × 75 mm diameter
- Suitable for school, university and teaching laboratory use
- Useful for physics, heat, light and energy demonstrations
- Refer to the product PDF for further information and experiment guidance
- Glass radiometer should be handled carefully
- Radiometer only, light source and accessories are not included
- Use under appropriate laboratory or educational supervision
AUD 43.90 (Ex GST)
Cross Connector, Polypropylene 4-Way for Laboratory Tubing
- 4-way cross connector for laboratory tubing connections
- Cross-shaped design supports branching or merging of tubing lines
- Made from polypropylene as listed
- Brand listed as PolyLab
- Available in 6 mm, 8 mm and 10 mm sizes as listed
- Useful for fluid pathway connections in laboratory setups
- Helps create secure tubing joints when correctly fitted
- Suitable for compatible liquids, reagents and laboratory tubing
- Practical accessory for school, university and research laboratories
- Confirm tubing inner diameter and chemical compatibility before use
- Connector only, tubing and apparatus are not included
- Use under appropriate laboratory or educational supervision
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Crow Receiver Cylinder Class A with Interchangeable Stopper, BORO 3.3
- Crow receiver cylinder manufactured to Class A accuracy for precise volume measurement
- Made from BORO 3.3 borosilicate glass for excellent chemical and thermal resistance
- Supplied with interchangeable glass stopper for secure sealing and flexibility
- Designed for accurate collection of distillates during laboratory distillation
- Clear glass construction allows easy meniscus reading and observation
- Uniform wall thickness and stable base for safe laboratory handling
- Supplied by LabChoice Australia, trusted specialists in laboratory glassware
From AUD 52.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Crow Receiver Cylinder Class A with Round Base, BORO 3.3
- Crow receiver cylinder manufactured to Class A accuracy for precise volume measurement
- Made from BORO 3.3 borosilicate glass with excellent chemical and thermal resistance
- Supplied with round base glass stopper for secure sealing during use
- Designed for accurate collection of distillates in laboratory distillation
- Clear glass construction for easy meniscus reading and observation
- Stable base and uniform wall thickness for safe laboratory handling
- Supplied by LabChoice Australia, trusted laboratory glassware specialists
Crow Receiver Cylinder Class B with Interchangeable Stopper, BORO 3.3
- Crow receiver cylinder manufactured to Class B accuracy for routine volume measurement
- Made from BORO 3.3 borosilicate glass for excellent chemical and thermal resistance
- Supplied with interchangeable glass stopper for secure sealing and compatibility
- Designed for collection of distillates during standard laboratory distillation work
- Clear glass construction allows easy meniscus reading and observation
- Uniform wall thickness and stable base for reliable laboratory handling
- Supplied by LabChoice Australia, trusted specialists in laboratory glassware
From AUD 39.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Crow Receiver Cylinder Class B with Round Base, BORO 3.3
- Crow receiver cylinder manufactured to Class B accuracy for routine laboratory measurements
- Made from BORO 3.3 borosilicate glass with excellent chemical and thermal resistance
- Round base design provides stability during distillation and collection
- Suitable for collection of distillates in standard laboratory procedures
- Clear glass construction allows easy observation and meniscus reading
- Uniform wall thickness for reliable and safe laboratory handling
- Supplied by LabChoice Australia, trusted laboratory glassware specialists
Crystal Structure Teaching Models, Diamond, Graphite and Sodium Chloride
- Crystal structure teaching model range for chemistry education
- Available in diamond, graphite and sodium chloride models
- Useful for demonstrating atomic and ionic lattice arrangements
- Supports classroom teaching of bonding and crystal structure
- Diamond model helps show a covalent network structure
- Graphite model helps show layered carbon structure
- Sodium chloride model helps show an ionic crystal lattice
- Supplied in a plastic box for storage and organisation
- Suitable for school, university and teaching laboratory use
- Use under appropriate laboratory or educational supervision
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylinder Head CC Measuring Kit Plastic (TPX) , High Quality
- TPX plastic cylinder head CC measuring kit for combustion chamber volume checks
- Lightweight, impact-resistant alternative to glass for workshop and training use
- Clear material supports easy viewing of fill level and meniscus during measurement
- Suitable for use with burettes and common measuring fluids in CC testing setups
- Ideal for engine builders, automotive workshops, machining, and technical education
- Easy to clean and reuse, helps reduce downtime between jobs
- Provides a stable measuring surface when correctly sealed to the cylinder head
From AUD 69.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylinder Head CC Measuring Kit, BORO 3.3 Glass
- BORO 3.3 borosilicate glass cylinder head CC measuring kit for accurate volume measurement
- Ideal for checking combustion chamber capacity during engine rebuilds, machining, and performance tuning
- High chemical resistance to common workshop fluids, and easy to clean after use
- Clear, stable glass construction supports precise visual reading of liquid level during testing
- Suitable for automotive workshops, engine builders, technical training, and mechanical labs
- Reusable, durable design when handled correctly, store safely to prevent impact damage
- Use with an appropriate burette or measuring device and sealing grease for best accuracy
From AUD 99.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylindrical Alnico Magnet for physics experiments
- Cylindrical Alnico magnet designed for physics experiments and educational magnetism demonstrations
- Manufactured from Alnico, a permanent magnetic alloy containing aluminium, nickel and cobalt
- Measures 30 mm in length and 10 mm in diameter
- Compact cylindrical design suitable for laboratory magnetic field investigations
- Permanent magnet produces a magnetic field without an external power source
- Features north and south magnetic poles for studying magnetic interactions
- Suitable for demonstrating magnetic attraction, repulsion and magnetic field patterns
- Supports investigations of magnetic forces and interactions with ferromagnetic materials
- Suitable for use with compasses, iron filings and other compatible physics equipment
- Reusable magnetic construction for repeated laboratory demonstrations
- Ideal for secondary schools, universities and educational physics laboratories
AUD 14.90 (Ex GST)
Cylindrical Dropping Funnel Glass Stopcock, With Cone & Graduated, Open Top, BORO 3.3 Glass
- Cylindrical dropping funnel for controlled liquid addition
- Made from BORO 3.3 glass for laboratory chemistry workflows
- Open top design supports easy filling and reagent handling
- Glass stopcock provides controlled liquid dispensing during use
- Cone joint connection supports compatible glassware assembly use
- Graduated body allows approximate liquid volume reference
- Clear glass construction enables visual monitoring of liquid level and flow
- Suitable for reaction, addition and transfer workflows
- Confirm capacity, graduation range, cone joint size and chemical compatibility before use
From AUD 30.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylindrical Dropping Funnel Glass Stopcock, with Graduation Open Top, BORO 3.3 Glass
- Cylindrical dropping funnel for controlled liquid addition
- Made from BORO 3.3 glass for laboratory chemistry workflows
- Open top design for practical filling and reagent handling
- Glass stopcock supports controlled dispensing during use
- Graduated body allows approximate volume reference
- Suitable for compatible reaction, addition and transfer setups
- Designed for use with standard laboratory glassware assemblies
- Clear glass construction enables easy visual monitoring of liquid level and flow
- Confirm capacity, graduation range, joint size and chemical compatibility before use
From AUD 30.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylindrical Dropping Funnel PTFE Stopcock With Cone & Graduated, Open Top, BORO 3.3 Glass
- Cylindrical dropping funnel for controlled liquid addition
- Made from BORO 3.3 glass for laboratory chemistry workflows
- Open top design supports easy filling and reagent handling
- PTFE stopcock provides smooth flow control and chemical resistance
- Graduated body allows approximate liquid volume reference
- Cone connection supports use with compatible glassware assemblies
- Confirm capacity, graduation range, cone size and chemical compatibility before use
From AUD 30.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylindrical Dropping Funnel PTFE Stopcock, with Graduation Open Top, BORO 3.3 Glass
- Cylindrical dropping funnel for controlled liquid addition
- Made from BORO 3.3 glass for laboratory chemical workflows
- Open top design for practical filling and reagent handling
- PTFE stopcock supports controlled flow adjustment
- Graduated body allows approximate volume reference during use
- Suitable for compatible laboratory reaction and transfer setups
- Confirm capacity, graduation range, joint size and chemical compatibility before use
From AUD 30.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylindrical Dropping Funnel with Glass Stopcock, Open Top, BORO 3.3 Glass
• Open-top cylindrical dropping funnel for convenient reagent filling • BORO 3.3 glass supports chemical resistance and laboratory durability • Glass stopcock allows controlled liquid flow and reagent addition • Suitable for solvents, reagents, and reaction mixture transfer • Clear glass body allows easy viewing of liquid level during use • Practical for chemistry, teaching, synthesis, and QC laboratory workflows • Suitable for Australian schools, universities, research, and industrial laboratories
From AUD 27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cylindrical Dropping Funnel with PTFE Stopcock, Open Top, BORO 3.3 Glass
• Open-top cylindrical dropping funnel for convenient reagent filling • BORO 3.3 glass supports chemical resistance and laboratory durability • PTFE stopcock allows smooth and controlled liquid flow • Suitable for dropwise addition of reagents, solvents, and reaction mixtures • Clear glass body allows easy viewing of liquid level during use • Practical for chemistry, synthesis, teaching, and QC laboratory workflows • Suitable for Australian schools, universities, research, and industrial laboratories
From AUD 27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
D Cell Battery Holder, Series or Parallel, Blue, Pack of 4
- Battery holder for D cell batteries
- Allows series or parallel circuit arrangements as listed
- Supplied as a pack of 4 holders
- Blue colour as listed
- Suitable for low-voltage electrical circuit demonstrations
- Useful for school, university and teaching laboratory activities
- Practical for electricity, current, voltage and circuit comparison experiments
- Supports hands-on classroom work with compatible D cells
- Confirm circuit configuration before use
- Battery holder only, D cell batteries are not included
- Avoid short circuits and incorrect polarity
- Use under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
Daniell Cell Experiment Kit
- Small experiment kit for Daniell cell demonstration
- Designed for teaching electrochemistry and redox reactions
- Demonstrates electron transfer from zinc to copper through a conducting path
- Supports practical explanation of useful electric current generation
- Useful for lessons on oxidation, reduction and galvanic cells
- Suitable for school, university and teaching laboratory workflows
- Helps students connect chemical reaction principles with electrical output
- Intended for laboratory or educational settings only
- Confirm supplied components and required chemicals before use
- Use under appropriate laboratory or educational supervision
AUD 236.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.