DC Smoothing Unit Power Supply, Up to 8 Amp
$120.90(Ex GST)
$120.90(Ex GST)
- DC smoothing unit for laboratory and education use
- Designed for use with unfiltered DC power supply outputs
- Converts compatible unfiltered DC output into smoother DC
- Current capacity listed up to 8 Amp DC
- Uses capacitors and a choke for effective DC filtering
- Useful with power supplies that provide full-wave rectified but unfiltered DC
- Suitable for physics, electronics and circuit demonstrations
- Helps support experiments requiring smoother DC than a basic rectified output
- Confirm power supply output, current rating and circuit suitability before use
- Use under appropriate teacher or laboratory supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The DC Smoothing Unit, also known as a power supply filter unit, is designed to be connected to a compatible unfiltered DC output from a laboratory power supply. This IEC smoothing unit helps change a rectified, unfiltered DC output into smoother DC for experiments where a more stable DC supply is required. The unit consists of capacitors and a choke, providing effective filtering of the DC output from a compatible power supply.
The current capacity is listed up to 8 A DC, making it suitable for selected low-voltage laboratory and classroom circuit applications within the rated operating limit. This smoothing unit is useful when working with power supplies that provide full-wave rectified but unfiltered DC, especially where electronic circuits or demonstrations require smoother DC behaviour. It is suitable for physics teaching, electronics practicals, low-voltage circuit experiments, power supply demonstrations and classroom investigations comparing filtered and unfiltered DC outputs.
Users should confirm the connected power supply output, voltage, current demand, polarity, load type and experiment suitability before operation. The connected circuit must remain within the rated capability of the smoothing unit and power supply. This product is intended for laboratory or educational settings only. As a power supply accessory used in electrical circuits, it should be operated under appropriate teacher or laboratory supervision. This item is supplied as the DC smoothing unit only. Power supply, leads, meters, circuit boards, loads and additional accessories are not included unless specified separately.
LabChoice Australia supplies DC Smoothing Units for school science laboratories, physics classrooms, electronics teaching laboratories and general education environments requiring practical accessories for low-voltage power supply experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Spare Pestles, Replacement Pestles for Glass and Porcelain Mortars
From $2.50 (Ex GST)
Rotary Evaporator Bump Trap Adapter, BORO 3.3 Glass
From $69.90 (Ex GST)
Density Cube Sets, Multi Material Sets for Classroom Density Experiments
From $18.90 (Ex GST)
Magnetic Stirrer, 5 Inch, up to 3 L Capacity
$200.50(Ex GST)
Glucose Test Strips, Routine Laboratory Testing Type
From $68.50 (Ex GST)
Holographic Diffraction Gratings
From $12.50 (Ex GST)
You May Also Need
Centre Zero Student Meter for DC Current
From $43.90 (Ex GST)
Centre Zero Student Volt Meter, Dual Range Galvanometer Type
$43.90(Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
From $43.90 (Ex GST)
Circuit Board Copper Foil Sheet, 150 × 150 mm
$17.50(Ex GST)
Circuit Board D Cell Battery Holder
$8.50(Ex GST)
Circuit Board Kit, Worcester Pattern Complete
$171.90(Ex GST)
Circuit Board Rheostat, 10 Ohm, Spring Connect
$19.90(Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From $656.50 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
$214.50(Ex GST)
Laboratory Electroscope in Metal Housing
From $85.90 (Ex GST)
Superconductivity Kit, Complete Set
From $18.90 (Ex GST)
U-Core Electromagnet with Armature, 12 V DC
$97.50(Ex GST)
Water Turbine Hydro-Electric Power
$216.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Low-Form Fused Silica Crucibles without Lid
From $49.90 (Ex GST)
DC Smoothing Unit Power Supply, Up to 8 Amp
$120.90(Ex GST)
TOP RATED PRODUCTS
Low-Form Fused Silica Crucibles without Lid
From $49.90 (Ex GST)
DC Smoothing Unit Power Supply, Up to 8 Amp
$120.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab