Air Track and Air Table Spark Generator, 240 V AC Mains
- Spark recording timer for linear air tracks, measures motion without photogates, permanent tape record.
- Two spark outputs, rate adjustable 2.5–50 sparks per second for controlled timing intervals.
- Electrode on gliders sparks across gap to tape, leaving black dots as position markers.
- Dot spacing enables velocity and acceleration calculations using measured distances and known spark rate.
- High-voltage cable pair supplied for connection to air track spark rails and recording setup.
AUD 911.50 (Ex GST)
Air Track Attachment Screws, Accessory
- Air track attachment screws and square nuts for accessory clamping
- Supports repeatable setup of compatible air track experiment hardware
- Grooved stem screw supports clamping and cord tying applications
- Plain flat top screw supports general attachment clamping
- Square nuts are designed to fit both grooved and flat top screws
- Square nut options include aluminium and glass-filled nylon
- Suitable for supervised laboratory and educational air track use
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Brass Glider Weights, Slotted Style
- Brass weight set for compatible air track gliders
- Slotted style weights designed to fit glider weight blocks
- Supplied as a set of 12 weights
- Includes 4 × 50 g weights as listed
- Includes 4 × 20 g weights as listed in supplied description
- Includes 4 × 10 g weights as listed
- Used to change glider mass during air track experiments
- Supports motion, momentum and collision demonstrations
- Suitable for school, university and teaching laboratory use
- Practical spare or replacement weight set for air track setups
- Confirm glider weight block compatibility before ordering
- Use under appropriate laboratory or educational supervision
AUD 60.50 (Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
- Buffer spring and mount for compatible air track gliders
- Stainless steel spring design as listed
- Supplied with screw for fitting as listed
- Fits to the end of compatible air tracks
- Fits to the ends of compatible air track gliders
- Suitable for both old and newer model air track gliders
- Used for elastic collision and rebound demonstrations
- Practical spare or replacement accessory for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm track and glider mounting compatibility before ordering
- Buffer spring and screw only, air track and glider are not included
- Use under appropriate laboratory or educational supervision
AUD 10.50 (Ex GST)
Air Track Coil Springs for SHM Experiments
- Coil spring accessories for compatible air track gliders
- Available in 300 mm and 60 mm length options
- 300 mm coil spring is designed for simple harmonic motion experiments
- 60 mm coil spring is designed to join gliders together
- Supports SHM system setup with compatible air track gliders
- Useful for motion, oscillation and dynamics demonstrations
- Practical spare or replacement spring for air track setups
- Suitable for school, university and teaching laboratory use
- Helps demonstrate restoring force and periodic motion behaviour
- Confirm glider attachment compatibility before ordering
- Coil spring only, gliders and air track are not included
- Use under appropriate laboratory or educational supervision
From AUD 4.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track End Plug for Later Model Air Tube
- Air track end plug for compatible air track systems
- Designed to seal the non-active end of the air tube
- Helps reduce air escaping from the unused end
- Suitable for later model air tubes as listed
- Practical spare part for air track maintenance
- Supports consistent air flow during motion experiments
- Useful for school and university physics laboratories
- Confirm air track model compatibility before ordering
- Plug only, air track and blower are not included
- Inspect plug fit before use
- Do not force into incompatible air tube ends
- Use under appropriate laboratory or educational supervision
AUD 5.50 (Ex GST)
Air Track Flat Loop Spring Holder with Screw and Nut
- Holder for flat loop spring on compatible air track gliders
- Designed to fit into the end of a compatible glider
- Clamps into the glider end for secure positioning
- Supplied with screw and nut as listed
- Supports approved spring and collision demonstrations
- Useful for air track motion and dynamics experiments
- Practical spare or replacement part for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm glider end and spring compatibility before ordering
- Holder, screw and nut only, flat loop spring is not included unless specified
- Air track and glider are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 7.50 (Ex GST)
Air Track Flat Loop Springs, Stainless Steel
- Flat loop spring accessories for compatible air track gliders
- Stainless steel construction as listed
- Available in 15 cm and 30 cm diameter options
- Width listed as 12 mm for both options
- Designed to join 2 compatible gliders together
- Supports air track motion and collision demonstrations
- Useful for oscillation and spring interaction experiments
- Practical spare or replacement spring for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm glider and spring holder compatibility before ordering
- Flat loop spring only, gliders and air track are not included
- Use under appropriate laboratory or educational supervision
From AUD 10.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Foot Adjusting Screw Lock Nut, Plastic
- Plastic lock nut for compatible later model air tracks
- Blue plastic nut designed for air track foot adjustment assemblies
- Used to lock the foot height adjusting screw in place
- Compatible with later model air track plastic foot setups
- Helps maintain selected foot height during approved use
- Practical spare or replacement part for air track maintenance
- Supports levelling and alignment stability
- Suitable for school, university and teaching laboratory use
- Confirm thread and adjusting screw compatibility before ordering
- Lock nut only, adjusting screw is not included
- Air track and plastic foot are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 3.90 (Ex GST)
Air Track Foot Adjusting Screw with Plastic Head
- Adjusting screw for compatible later model air tracks
- Blue plastic knob with metal threaded screw
- Designed to screw into compatible plastic air track foot
- Used to adjust foot height during setup
- Supports lateral setting adjustment where compatible
- Practical spare or replacement part for air track maintenance
- Helps support levelling and alignment of air track equipment
- Suitable for school, university and teaching laboratory use
- Confirm thread size and plastic foot compatibility before ordering
- Adjusting screw only, plastic foot is not included
- Air track and sub base are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 7.50 (Ex GST)
Air Track Foot Attachment Screw and Nut Only
- Spare screw and aluminium square nut for air track equipment
- Designed for attaching a plastic foot to a compatible air track
- Also suitable for attaching a plastic foot to a compatible sub base
- Useful replacement hardware for classroom air track setups
- Helps secure the foot attachment during approved use
- Suitable for school, university and teaching laboratory use
- Practical spare part for maintenance and repair
- Confirm thread, nut size and equipment compatibility before ordering
- Screw and nut only, plastic foot is not included
- Air track and sub base are not included unless specified separately
- Check the attachment is secure before use
- Use under appropriate laboratory or educational supervision
AUD 1.90 (Ex GST)
Air Track Foot Support for Spark and Paper Tracks
- Modified moulded plastic foot for compatible new model air tracks
- Designed to support a spark track or paper support track
- Made from a standard air track foot cut shorter
- Suitable for approved air track accessory setups
- Practical spare or replacement part for air track maintenance
- Helps support spark timing or paper track arrangements
- Useful for school, university and teaching laboratory use
- Supports classroom motion and dynamics demonstrations
- Confirm air track model and support track compatibility before ordering
- Foot support only, spark track and paper support track are not included
- Air track and fixing hardware are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
Air Track Glider Constant Force Attachment
- Special air track glider attachment for constant force experiments
- Designed for compatible air track glider systems
- Supports selected force and motion demonstrations
- Useful for special physics experiments involving controlled force application
- Helps demonstrate acceleration, motion and Newton’s second law concepts
- Suitable for school, university and teaching laboratory use
- Practical accessory for advanced air track experiment setups
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and force accessories are not included unless specified separately
- Keep clear of moving gliders during use
- Use under appropriate laboratory or educational supervision
AUD 232.90 (Ex GST)
Air Track Glider Jet Propulsion Attachment
- Special air track glider attachment for jet propulsion experiments
- Designed for compatible air track glider systems
- Uses balloon air jet propulsion for approved demonstrations
- Suitable for special physics and motion experiments
- Supports lessons on force, motion and propulsion
- Useful for action and reaction demonstrations
- Practical accessory for advanced air track experiment setups
- Suitable for school, university and teaching laboratory use
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and balloon may not be included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 78.50 (Ex GST)
Air Track Glider Pendulum Attachment
- Special air track glider attachment for pendulum experiments
- Designed for compatible air track glider systems
- Supports selected pendulum and motion demonstrations
- Useful for special physics experiments
- Helps demonstrate oscillation, force and motion concepts
- Suitable for school, university and teaching laboratory use
- Practical accessory for advanced air track experiment setups
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and pendulum accessories are not included unless specified separately
- Keep clear of moving or swinging components during use
- Use under appropriate laboratory or educational supervision
AUD 234.50 (Ex GST)
Air Track Glider Soft Collision Attachment
- Special air track glider attachment for soft collision experiments
- Designed for compatible air track glider systems
- Supports selected collision and motion demonstrations
- Useful for special physics experiments involving reduced-impact collisions
- Helps demonstrate collision behaviour, momentum and energy transfer
- Suitable for school, university and teaching laboratory use
- Practical accessory for advanced air track experiment setups
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and timing accessories are not included unless specified separately
- Keep clear of moving gliders during use
- Use under appropriate laboratory or educational supervision
AUD 81.90 (Ex GST)
Air Track Glider Vertical Projectile Attachment
- Special air track glider attachment for vertical projectile experiments
- Designed for compatible air track glider systems
- Supports selected projectile motion demonstrations
- Useful for special physics experiments involving vertical motion
- Helps demonstrate motion, launch behaviour and trajectory concepts
- Suitable for school, university and teaching laboratory use
- Practical accessory for advanced air track experiment setups
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and timers are not included unless specified separately
- Keep clear of moving or launched components during use
- Use under appropriate laboratory or educational supervision
AUD 254.90 (Ex GST)
Air Track Glider Weight and Screw, 200 mm Compensating
- Removable compensating weight and screw for air track gliders
- Designed for old style 200 mm air track glider setups
- Used as replacement hardware for compatible earlier model gliders
- Weight is described as permanent in later model gliders
- Practical spare part for maintaining older air track equipment
- Supports correct glider balance and setup during approved experiments
- Suitable for school, university and teaching laboratory use
- Useful for motion, dynamics and collision experiment maintenance
- Confirm glider model and compatibility before ordering
- Weight and screw only, glider is not included
- Air track and blower are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 11.90 (Ex GST)
Air Track Gliders for Low Friction Motion
- Air track gliders for low-friction linear motion experiments
- Suitable for motion, collision and momentum demonstrations
- Available in 200 mm and 100 mm standard lengths
- 200 mm gliders have a stated weight of 200 g
- 100 mm gliders have a stated weight of 100 g
- Each glider is fitted with weight carrier blocks
- Available in black or gold finishes for easy experiment identification
From AUD 32.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Inclination Blocks, Plastic, Set of 4
- Air track inclination blocks for physics experiments
- Supplied as a set of 4 blocks as listed
- Moulded plastic construction as listed
- Includes 3 mm inclination block
- Includes 6 mm inclination block
- Includes 12 mm inclination block
- Includes 20 mm inclination block
- Designed for raising one end of a compatible air track
- Useful for studying motion on inclined air tracks
- Suitable for school and university physics laboratories
- Confirm air track compatibility before use
- Use under appropriate laboratory or educational supervision
AUD 8.90 (Ex GST)
Air Track Installation & User Manual
- Air track documentation and launcher accessory range for teaching systems
- Supports setup, assembly and operation of compatible air track apparatus
- Manuals are available for 2.0 m and 2.5 m air track versions
- Correct manual selection helps match the installed track length
- Manual trip launcher is listed as a simple air track launching accessory
- Useful for staff handover, maintenance records and experiment preparation
- Suitable for supervised physics laboratory and educational air track use
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Magnet for Glider, Alnico, 50 g
- Magnet accessory for compatible air track gliders
- Alnico magnet as listed
- Designed to fit the glider spine
- Mass listed as 50 g
- Useful for magnetic interaction experiments
- Supports low-friction force and motion demonstrations
- Suitable for collision, attraction and repulsion activities
- Practical spare or replacement accessory for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm glider spine compatibility before ordering
- Magnet only, glider and air track are not included
- Use under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
Air Track Metal Brace for Lateral Feet
- Metal brace for compatible air track support feet
- Designed to reinforce double lateral support feet
- Suitable for later model air track setups
- Helps improve foot support stability during approved use
- Practical spare or replacement part for air track maintenance
- Useful for school, university and teaching laboratory use
- Supports reliable setup for motion and dynamics experiments
- Compatible with approved air track foot assemblies
- Confirm air track model and lateral foot compatibility before ordering
- Metal brace only, lateral feet are not included
- Air track and sub base are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 10.90 (Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
- Non-elastic buffer pair for compatible air track gliders
- Velcro type design supports non-elastic collision demonstrations
- Fits to the end of compatible air track gliders
- Suitable for momentum and collision experiments in physics teaching
- Fits both old and new style air track gliders as specified
- Supplied as a pair for paired glider collision setups
- Designed for supervised laboratory and educational air track use
AUD 12.50 (Ex GST)
Air Track Nylon Pulley for End of Track
- Air track pulley for end-of-track attachment
- Nylon pulley as listed
- Supplied on strip as listed
- Includes flat top attachment screw as listed
- Designed to fix to the end fitting of an air tube
- Useful for air track motion and dynamics experiments
- Supports string, mass and glider motion demonstrations
- Suitable for school and university physics teaching laboratories
- Confirm air track model and end fitting compatibility before ordering
- Pulley accessory only, air track and gliders are not included
- Keep fingers and loose items clear of moving string and pulley
- Use under appropriate laboratory or educational supervision
AUD 20.90 (Ex GST)
Air Track Old Style Brass Glider Weights
- Old style brass weights for compatible air track gliders
- Available in 50 g and 100 g options
- Brass block design for fitting inside the glider spine
- Designed to clamp inside compatible old style gliders
- Used to increase or adjust glider mass during experiments
- Supports motion, momentum and collision demonstrations
- Suitable for school, university and teaching laboratory use
- Practical spare or replacement part for older air track setups
- Confirm old style glider compatibility before ordering
- Weight only, glider and air track are not included
- Check the weight is securely clamped before use
- Use under appropriate laboratory or educational supervision
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Operation Kit for 2 m and 2.5 m Tracks
- Air track operation kit for physics experiments
- Suitable for compatible 2 m and 2.5 m air tracks
- Same operation kit is used for both track lengths
- Includes 2 long gliders and 2 short gliders
- Includes spring buffers and non-spring buffers
- Includes various springs and loop springs
- Includes track pulley, magnets, weights and inclination blocks
- Supplied with instructions
- Designed for performing air track motion experiments
- Included with complete 2.5 m MF0105Z-001 and 2 m MF0107Z-001 air tracks
- Also available separately as a replacement or accessory kit
- Use under appropriate laboratory or educational supervision
AUD 458.90 (Ex GST)
Air Track Over-Track Photogate with Leg Supports
- General purpose photogate supplied with special air track mounting legs
- Designed to fit directly over compatible newer series air track tubes
- Spring extension legs slide into receptacles on each side of the gate
- Supports timing experiments in low-friction air track motion studies
- Useful for velocity, acceleration and collision timing demonstrations
- Cables and plugs are not supplied and must be selected separately
- Suitable for supervised physics laboratory and educational use
AUD 170.50 (Ex GST)
Air Track Photogate Kit, 2 Gates and Cables, Without Timer
- Photogate kit for IEC air track timing experiments
- Contains 2 universal photogates
- Supplied with required cables and plugs for connection to a digital timer
- Digital timer is not included
- Optional IEC Timer LB4064-101 is the recommended timer model
- Compatible with several IEC timer types where suitable
- Special legs allow the gates to engage with a triangular air track
- Gates can be slid along the air track to the required position
- Useful for motion, speed, acceleration and timing experiments
- Suitable for physics classrooms and teaching laboratories
- Confirm timer and air track compatibility before ordering
- Use under appropriate laboratory or educational supervision
AUD 458.90 (Ex GST)
Air Track Plastic Foot for Lateral or Vertical Use
- Moulded plastic foot for compatible new model air tracks
- Designed for lateral or vertical foot positioning
- Suitable for use on compatible air track assemblies
- Also suitable for compatible sub base assemblies
- Practical spare or replacement part for air track maintenance
- Helps support stable air track setup during approved use
- Useful for school, university and teaching laboratory use
- Supports reliable setup for motion and dynamics experiments
- Confirm air track and sub base compatibility before ordering
- Plastic foot only, fixing hardware is not included
- Air track and sub base are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 12.50 (Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
- Replacement Velcro strip pairs for air track glider collision experiments
- Hook and claw strips support non-elastic collision demonstrations
- Each strip size is stated as 20 × 75 mm
- Supplied as 2 pairs for multiple glider setups or spare replacement use
- Helps two moving bodies stick together on impact during collision trials
- Supports momentum discussion and post-collision motion observation
- Suitable for supervised laboratory and educational air track use
AUD 4.90 (Ex GST)
Air Track Spark Generator Cables, Precision Connection Set
- Cable accessory set for air track spark generator and spark recording systems
- Remote control cable includes press button for spark generator start and stop control
- EHV cable pair connects spark tracks to the spark generator
- Earth cable includes 4 mm banana plugs for connection between air track and spark generator
- Supports reliable connection, controlled operation and routine physics demonstration setup
- Replacement cable options help maintain spark recording system performance
- Compatibility with existing spark generator sockets and track hardware should be confirmed before use
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.