E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Non-Elastic Velcro Buffer Pair
$12.50(Ex GST)
$12.50(Ex GST)
- Non-elastic buffer pair for compatible air track gliders
- Velcro type design supports non-elastic collision demonstrations
- Fits to the end of compatible air track gliders
- Suitable for momentum and collision experiments in physics teaching
- Fits both old and new style air track gliders as specified
- Supplied as a pair for paired glider collision setups
- Designed for supervised laboratory and educational air track use
- Description
Description
The Air Track Non-Elastic Velcro Buffer Pair, also known as a non-elastic collision buffer set for air track gliders, is designed for use in physics experiments involving collision behaviour, momentum and low-friction motion. It is suitable for school physics laboratories, university teaching laboratories and supervised educational mechanics demonstrations.
The buffer pair fits to the end of compatible air track gliders. Its Velcro type contact design supports non-elastic collision demonstrations where gliders are intended to connect or interact differently from elastic spring-buffer collisions. This accessory helps teachers and students compare collision outcomes using compatible air track systems. It is useful for demonstrating how collision type affects motion, momentum transfer and post-collision behaviour in controlled classroom experiments.
The supplied details state that the buffer fits both old and new style air track gliders. This supports compatibility across existing air track setups where replacement or additional non-elastic collision buffers are required. Supplied as a pair, the buffers support paired glider setups used in collision experiments. Users should confirm glider fit, attachment method and experiment configuration before use. These buffers are intended for laboratory and educational use under appropriate supervision. They should be used only with compatible air track gliders and suitable air track systems, following normal classroom safety and setup procedures.
LabChoice Australia supplies Air Track Non-Elastic Velcro Buffer Pairs for school physics departments, university teaching laboratories and educational mechanics workspaces. They are suitable for supervised air track demonstrations involving non-elastic collisions, momentum comparison, low-friction motion and collision analysis.
Stainless Unheated Water Bath for Sample Holding
From $653.00 (Ex GST)
Hipipette Fully Autoclavable Colour-Coded Single-Channel Mechanical Pipette
From $186.50 (Ex GST)
Biochemical Oxygen Demand (BOD) Bottle , BORO 3.3 Glass
From $12.90 (Ex GST)
Student Flame Spectrometer for Emission and Atomic Absorption
$2,025.50(Ex GST)
Variable Speed LCD Digital Tube Roller, 6-Roller Type
$1,049.50(Ex GST)
Norwood-Style Glass Electrodes, Set of 4, Kit Components
$125.90(Ex GST)
Receiver Delivery Adapter Long Stem BORO 3.3 Glass Laboratory Grade
From $11.90 (Ex GST)
Laboratory Racks, Burette Draining and Cuvette Storage Type
From $14.90 (Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From $7.50 (Ex GST)
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
From $8.50 (Ex GST)
Air Table, Dynamics and Kinematics Model
From $4.50 (Ex GST)
Air Track End Plug for Track Tube
$5.50(Ex GST)
Air Track Glider Attachments, Inelastic Collision Accessory Set
From $78.50 (Ex GST)
Air Track Gliders for Low Friction Motion
From $32.90 (Ex GST)
Air Track Over-Track Photogate with Leg Supports
$170.50(Ex GST)
Banana Plugs, 4mm
From $5.50 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From $13.50 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From $21.90 (Ex GST)
Boyle’s Law Syringe Only, Commercial Plastic Syringe
$3.90(Ex GST)
Brass Filter Pump with Non-Return Valve
From $77.50 (Ex GST)
Deflagrating Spoons with Aluminium Cap
From $16.50 (Ex GST)
Support Rack for Radiation Source and Absorber Alignment
$46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
