Adam PMB Moisture Analyser for Laboratory Moisture Testing
- Vivid, backlit LCD easily visible in any lighting conditions
- Capacity tracker built into display for easily monitoring possible overloads
- Scratch-resistant aluminum housing protects internal components
- Colour-coded keys facilitate quick recognition of the most frequently used buttons
- Pan lifter allows easy placement and removal of samples
- RS-232 interface is available to provide speedy connection to computers and printers
- USB host for memory card and USB I/O interface
- USB interface included for data communication
- Temperature range 50°C to 160°C in one-degree increments
- Three settings for heating sample include ramp-up, stepped temperatures and single temperature
- Seven preset drying modes allow test routines for several products
- Audible overload alarm warns when capacity is exceeded
- Testing can be set to start automatically when lid closes
- Calibration for temperature and weight
- Multilingual display allows use in many different countries
- Quick and easy configuration using the keypad
- Zero-tracking feature ensures display returns to zero reading
- Internal memory stores 49 different receipes and up to 99 test results,and additional test results and settings can be stored on a flash drive
- Programmable moisture analysers with 50g to 200g capacity, moisture percentage weighing modes, USB and RS-232 interface, backlit 24mm LCD display, external calibration and internal memory for test results.
From AUD 2,960.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Adam Polaris Precision Balances for Accurate Lab Weighing
- Intuitive, easy-to-use display showing instructions, results and application status at a glance
- Store 200,000+ results in the internal memory for full traceability
- Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines
- Large, grade 304 stainless steel pan allows easy cleaning
- Security slot for optional lock and cable to help prevent theft
- Colour-changing backlight in checkweighing mode to show if under, over or within acceptable limits
- Connect seamlessly to PCs, printers, or LIMS via Bluetooth®, RJ45 Ethernet, RS-232 and USB interfaces
- Bright, LED-lit weighing chamber for clear visibility of samples
- High-resolution graphic display is amply sized for clear visibility
- Capacity tracker built into display for easily monitoring possible overloads
- Up to 200 ingredients can be stored in the internal memory (10 formulations each holding 20 ingredients)
- Multilingual display allows use in many different countries
- Selectable digital filtering helps minimise effects of vibration and disturbances
- Removable draft shield for easy cleaning and transportation offsite
- Multi-level security permissions: 1 administrator plus up to 99 operators
- Hook provided for below-balance weighing
- In-use cover provided to protect the balance from dust, dirt and moisture
- Solid, durable ABS housing to withstand daily use
From AUD 2,050.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Adam Polaris PTB/PBB Toploading Precision Balances for Lab Weighing
- Intuitive, easy-to-use display showing instructions, results and application status at a glance
- Store 200,000+ results in the internal memory for full traceability
- Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines
- Large, grade 304 stainless steel pan allows easy cleaning
- Security slot for optional lock and cable to help prevent theft
- Colour-changing backlight in checkweighing mode to show if under, over or within acceptable limits
- Connect seamlessly to PCs, printers, or LIMS via Bluetooth®, RJ45 Ethernet, RS-232 and USB interfaces
- Bright, LED-lit weighing chamber for clear visibility of samples
- High-resolution graphic display is amply sized for clear visibility
- Capacity tracker built into display for easily monitoring possible overloads
- Up to 200 ingredients can be stored in the internal memory (10 formulations each holding 20 ingredients)
- Multilingual display allows use in many different countries
- Selectable digital filtering helps minimise effects of vibration and disturbances
- Removable draft shield for easy cleaning and transportation offsite
- Multi-level security permissions: 1 administrator plus up to 99 operators
- Hook provided for below-balance weighing
- In-use cover provided to protect the balance from dust, dirt and moisture
- Solid, durable ABS housing to withstand daily use
From AUD 1,615.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Adam Polaris Semi-Micro and Analytical Balances for Precision Lab Weighing
- Store 200,000+ results in the internal memory for full traceability
- Colour-changing backlight in checkweighing mode to show if under, over or within acceptable limits
- Connect seamlessly to PCs, printers, or LIMS via Bluetooth®, RJ45 Ethernet, RS-232 and USB interfaces
- Compliance with Good Laboratory Practices (GLP) and Good Manufacturing Practices (GMP) standards for data tracking
- Unique air diversion technology (ADT) below the weighing pan discharges warm air from the weighing chamber for more accurate weighing results (PAB 125i only)
- Bright, LED-lit weighing chamber for clear visibility of samples
- Security slot for optional lock and cable to help prevent theft
- Large, grade 304 stainless steel pan allows easy cleaning
- Capacity tracker built into display for easily monitoring possible overloads
- Up to 200 ingredients can be stored in the internal memory (10 formulations each holding 20 ingredients)
- Multilingual display allows use in many different countries
- Selectable digital filtering helps minimise effects of vibration and disturbances
- Removable draft shield for easy cleaning and transportation offsite
- Intuitive, easy-to-use display showing instructions, results and application status at a glance
- Multi-level security permissions: 1 administrator plus up to 99 operators
- Hook provided for below-balance weighing
- In-use cover provided to protect the balance from dust, dirt and moisture
- Solid, durable ABS housing to withstand daily use
From AUD 3,420.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Adhesive Mat Tray
- Adhesive mat tray range for compatible incubator and mixer platforms
- Stainless steel tray construction supports routine laboratory use
- Carry handles support easier tray placement, removal and handling
- Adhesive mat holds suitable flat-bottom vessels in place during operation
- Helps maximise usable platform area for flexible vessel arrangement
- Adhesive surface can be washed with clean water to restore adhesion
- Reusable thousands of times for repeated laboratory tray workflows
Adjustable Aepinus Air Capacitor for Electrical Experiments
- Aepinus air capacitor for physics and electrical demonstrations
- Adjustable capacitance range listed as 2–250 pF in title
- Uses two sets of square plates as listed
- Plates are magnetically held parallel and true in position
- Adjustable plate separation from 1 mm to 120 mm as listed
- 4 mm sockets provided for electrical connection
- Circuit protected against accidental plate contact as listed
- Friction slider blocks allow quick plate removal and size changes
- Sturdy feet support stable bench-top use
- Useful for electrostatics and capacitance demonstrations
- Plate size and capacitance range should be confirmed before final upload
- Use under appropriate laboratory or educational supervision
AUD 323.50 (Ex GST)
Adjustable Constant Current DC Power Supply, 0 to 2 A / 12 V
- Adjustable constant current DC power supply for laboratory and education use
- Output range listed as 0 to 2 A
- Maximum output voltage listed as 12 V DC
- Designed to maintain a preset current through a changing load
- Voltage automatically adjusts to support the selected current
- Useful for solenoid coil heating and resistance change demonstrations
- Suitable for electroplating studies and controlled-current experiments
- 4 mm socket head terminals support clamped wires and standard 4 mm banana plugs
- Suitable for physics, electrical circuits and electrochemistry teaching
- Use under appropriate teacher or laboratory supervision
AUD 435.90 (Ex GST)
Adjustable Inclined Plane with Pulley and Angle Scale
- Adjustable inclined plane for friction, vectors and force experiments
- Plane size is stated as 100 × 500 mm, width × length
- Fully adjustable angle up to 45 degrees for mechanics demonstrations
- Hinged aluminium base also acts as a storage container for kit parts
- Angle scale is positioned on the adjustment bar for protected storage
- Top pulley supports string and load setups in suitable experiments
- Available in melamine coated timber or glass surface versions
From AUD 137.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Adjustable Plastic Lens and Mirror Holder
- Adjustable plastic holder for lenses and mirrors
- Suitable for optics teaching and classroom demonstration setups
- Holds lenses or mirrors up to 4 mm wide
- Suitable for items up to 75 mm across
- Height adjustment range listed as 60 mm up or down
- Overall size listed as 110 × 70 × 160 mm
- Weight listed as 0.15 kg
- Practical for ray optics, reflection and refraction experiments
- Confirm lens or mirror size, thickness and classroom setup compatibility before use
AUD 9.50 (Ex GST)
Adjustable Pulley on Clamp, 70 mm Diameter
- Adjustable pulley on clamp for physics experiments
- 70 mm diameter pulley
- Single pulley mounted on durable table clamp
- All metal construction
- Maximum clamp opening listed as 35 mm
- Suitable for use on compatible lab tables and inclined boards
- Useful for force, friction and motion experiments
- Supports demonstrations involving resolution of forces
- Suitable for pulley, tension and load-direction activities
- Practical apparatus for school and university teaching laboratories
- Confirm clamp opening and mounting surface before use
- Use under appropriate laboratory or educational supervision
AUD 27.50 (Ex GST)
Special Price
Adjustable Speed Tube Rotator for Laboratory Sample Mixing
- Adjustable speed range from 0 to 80 rpm supports controlled tube mixing
- Gentle rolling action provides effective movement without vigorous agitation
- Scale-based speed control allows simple and direct manual adjustment
- Continuous operating mode supports extended laboratory mixing procedures
- Compatible with disk and rotisserie accessories for 1.5, 15 and 50 mL tubes
- DC motor operates from a universal 100 to 240 V, 50/60 Hz power supply
- Suitable for research, clinical, biotechnology, teaching and general laboratories
AUD 595.00 (Ex GST)
Adjustable Thermometer Holder Clamp with Bosshead
- Adjustable thermometer holder clamp provides secure, controlled positioning of thermometers and probes
- Integrated bosshead mounts firmly to retort stands and support rods for stable setups
- Fine adjustment helps align sensors accurately for distillation, reflux, and temperature monitoring
- Protective gripping surfaces help reduce slipping and minimise risk of glass damage
- Durable metal construction suited to routine use in teaching, research, and QA/QC laboratories
AUD 14.90 (Ex GST)
Adjustable Volume Micropipettes, High Accuracy Liquid Handling Type
- Adjustable volume micropipettes covering 0–2 µL up to 10 mL, supports full range laboratory liquid handling requirements
- Specifications conform to DIN 12650 and EN ISO 8655, supports accuracy, precision and calibration traceability
- Compatible with Tarsons pipette tips, supports standard lab consumables and easy integration into workflows
- Click stop digital volume setting and two step plunger, supports consistent dispensing and reverse pipetting technique
- Ergonomic lightweight design with smooth plunger movement, reduces hand fatigue during repetitive pipetting tasks
From AUD 112.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Advanced Resonance Apparatus with 1 m Vertical Scale Included
- 1 m vertical stand with metric scale for direct air column length reading during resonance trials.
- 20 mm plastic resonance tube connected to 1 L water vessel for adjustable air column boundary.
- Raise or lower water vessel to shift water level, tuning air column length quickly and repeatably.
- Tuning fork supplied, listen at tube mouth to identify strongest resonance positions and mark lengths.
- Use marked lengths to calculate wavelength and frequency of the tuning fork from resonance conditions.
AUD 232.90 (Ex GST)
Save 23%
Air Condenser Borosilicate Glass BORO 3.3 Laboratory Grade
- Air condenser designed for passive cooling without water circulation
- Suitable for gentle distillation, reflux and low boiling point solvents
- Made from high clarity BORO 3.3 glass with strong thermal and chemical resistance
- Ideal for schools, teaching labs and water limited laboratory environments
- Straight tube design for easy cleaning and reliable vapour visibility
- Made from LabChoice BORO 3.3 glass, high quality
From AUD 19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Cored Inductance Coils, Laboratory Inductor Type
- Air cored inductance coils for laboratory and classroom electrical demonstrations
- Matched to the coil format used with small demonstration transformer and induction kit setups
- Available inductance values include 5 mH, 10 mH, 15 mH and 20 mH
- Number of turns is adjusted to provide the stated inductance value for each coil
- Two 4 mm banana sockets are integrated into the coil body for quick connections
- Consistent coil design supports repeatable inductance and electromagnetic induction demonstrations
- Each coil is supplied as a single component, with the required mH value selected by the user
From AUD 56.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Bronze Bumper Wires
- Bronze bumper wire accessories for compatible air table systems
- Available in long side and short side options
- Designed for approved air table bumper wire arrangements
- Used around compatible air table working areas
- Supports low-friction motion and collision demonstrations
- Helps provide boundary contact during selected puck experiments
- Suitable for school, university and teaching laboratory use
- Practical spare or replacement part for air table maintenance
- Confirm air table model and required side before ordering
- Bumper wire only, bronze spring and air table are not included
- Inspect before use for bending, sharp ends or poor fit
- Use under appropriate laboratory or educational supervision
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Bronze Spring for Bumper Wires
- Bronze spring accessory for compatible air table systems
- Designed to hold bumper wires in approved air table setups
- Useful spare or replacement part for air table maintenance
- Supports bumper wire positioning during motion experiments
- Suitable for school, university and teaching laboratory use
- Practical accessory for low-friction mechanics demonstrations
- Compatible with approved air table bumper wire arrangements
- Helps maintain correct bumper wire setup where required
- Confirm air table model and bumper wire compatibility before ordering
- Spring only, bumper wires and air table are not included
- Inspect before use for damage, deformation or poor fit
- Use under appropriate laboratory or educational supervision
AUD 4.50 (Ex GST)
Air Table Circular Magnet for Small Puck
- Circular magnet accessory for compatible small air table pucks
- Designed to fit small puck air table systems
- Supports magnetic interaction demonstrations
- Useful for low-friction motion and collision experiments
- Practical spare or replacement magnet for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Helps demonstrate attraction, repulsion and non-contact force effects
- Compatible with approved small air table puck arrangements
- Confirm puck size and magnet fit before ordering
- Magnet only, puck and air table are not included
- Keep magnets away from sensitive electronics and magnetic storage media
- Use under appropriate laboratory or educational supervision
AUD 12.50 (Ex GST)
Air Table Hollow Centre Pin for Cord
- Hollow centre pin accessory for compatible air table systems
- Designed for use at the centre of the air table
- Hollow design allows cord to pass through where required
- Supports approved air table motion and mechanics experiments
- Useful for cord-guided puck, force and circular motion demonstrations
- Practical spare or replacement part for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Compatible with approved air table experiment arrangements
- Confirm air table fit and cord compatibility before ordering
- Centre pin only, cord and air table are not included
- Keep hands clear of moving pucks and cords during use
- Use under appropriate laboratory or educational supervision
AUD 15.90 (Ex GST)
Air Table Non-Elastic Collision Bands
- Hook and claw style bands for air table puck experiments
- Designed for non-elastic collision demonstrations
- Available for large air table pucks
- Available for small air table pucks
- Supplied as a pair of bands for the selected puck size
- Helps pucks connect during collision demonstrations
- Useful for momentum, collision and energy transfer experiments
- Suitable for school, university and teaching laboratory use
- Practical spare or replacement accessory for air table setups
- Confirm puck size and band compatibility before ordering
- Bands only, pucks and air table are not included
- Use under appropriate laboratory or educational supervision
From AUD 14.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Operating Kit, Complete Set Without Table
- Complete operating kit for compatible air table systems
- Supplied without the air table
- Supplied without adjustment feet
- Designed for use with compatible air table equipment
- Supports low-friction motion and mechanics experiments
- Useful for classroom physics demonstrations
- Practical replacement or operating accessory kit
- Suitable for school, university and teaching laboratory use
- Confirm kit contents and air table compatibility before ordering
- Operating kit only, table and feet are not included
- Use only with approved air table setup and supervision
- Use under appropriate laboratory or educational supervision
AUD 279.90 (Ex GST)
Air Table Pivot Pin for Centre of Table
- Pivot pin accessory for compatible air table systems
- Designed to screw into the centre of the air table
- Supports approved air table motion and mechanics experiments
- Useful for pivot, circular motion and linked puck demonstrations
- Compatible with suitable air table accessories and joining strips
- Practical replacement or spare part for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Helps provide a central pivot point during selected experiments
- Confirm thread fit and air table compatibility before ordering
- Pivot pin only, air table and pucks are not included
- Keep hands clear of moving pucks during use
- Use under appropriate laboratory or educational supervision
AUD 9.50 (Ex GST)
Air Table Puck Joining Spring for Lattices
- Small coil spring accessory for compatible air table pucks
- Designed for joining pucks to make lattice arrangements
- Supports air table mechanics and motion experiments
- Useful for modelling connected particle systems
- Suitable for wave, oscillation and force interaction demonstrations
- Compatible with approved air table puck systems
- Practical spare or replacement spring for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Confirm puck attachment compatibility before ordering
- Spring only, pucks and air table are not included
- Keep hands clear of moving pucks during use
- Use under appropriate laboratory or educational supervision
AUD 6.90 (Ex GST)
Air Table Puck Joining Strip with Pulley Pivot
- Air table accessory for compatible puck experiments
- Flat joining strip designed to connect 2 compatible air table pucks
- Hole at each end fits over the central pin of compatible pucks
- Centre hole is designed to fit over a compatible pivot pin
- Supports rotational motion and linked puck demonstrations
- Useful for air table mechanics and motion experiments
- Suitable for school, university and teaching laboratory use
- Helps demonstrate motion, force and circular path behaviour
- Pivot pin is not included
- Pucks and air table are not included unless specified separately
- Confirm puck pin and pivot compatibility before use
- Use under appropriate laboratory or educational supervision
AUD 39.50 (Ex GST)
Air Table Puck Weight Sets, for air table setups
- Brass weight set accessories for compatible air table pucks
- Available to fit large air table pucks
- Available to fit small air table pucks
- Used to change puck mass during air table experiments
- Supports momentum, collision and motion investigations
- Useful for comparing motion with different puck masses
- Practical spare or replacement accessory for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Confirm puck size and weight fit before ordering
- Weight set only, pucks and air table are not included
- Keep hands clear of moving pucks during use
- Use under appropriate laboratory or educational supervision
From AUD 18.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Pucks, Complete with Weights
- Complete air table puck options for physics experiments
- Available in large puck and small puck options
- Supplied complete with compatible weights
- Designed for compatible air table systems
- Supports low-friction motion demonstrations
- Useful for momentum, collision and force experiments
- Added weights allow mass variation during selected activities
- Suitable for school, university and teaching laboratory use
- Practical replacement or spare puck set for air table equipment
- Confirm puck size and air table compatibility before ordering
- Air table and blower are not included unless specified separately
- Use under appropriate laboratory or educational supervision
From AUD 38.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Small Puck Complete with Magnet
- Complete small air table puck for physics experiments
- Supplied with compatible magnet
- Designed for compatible air table systems
- Supports low-friction motion demonstrations
- Useful for magnetic interaction and force experiments
- Suitable for attraction and repulsion demonstrations
- Helps demonstrate motion without direct mechanical contact
- Practical replacement or spare puck for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Confirm air table and puck compatibility before ordering
- Air table and blower are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 38.50 (Ex GST)
Air Track Air Inlet End Cap, Triangular Plastic
- Air inlet end cap for compatible new model air track tubes
- Moulded triangular plastic end cap design
- Accepts the air hose from the current model IEC Air Blower
- Designed for new model IEC air track tube setups
- Not suitable for older model IEC air track tubes
- Practical spare or replacement part for air track maintenance
- Helps connect air supply to the compatible air track tube
- Suitable for school, university and teaching laboratory use
- Useful for air track motion and dynamics experiment setups
- Confirm air track tube and blower hose compatibility before ordering
- End cap only, air blower and air track are not included
- Use under appropriate laboratory or educational supervision
AUD 14.50 (Ex GST)
Air Track Air Inlet Reducing Bush
- Reducing bush for compatible air track air inlet setups
- Fits into old style air track end moulding
- Reduces the inlet hole size for smaller air hose connection
- Suitable for the hose used on later model IEC adjustable speed air blower
- Helps adapt older air track equipment for newer blower hose use
- Practical spare or conversion part for air track maintenance
- Useful for school, university and teaching laboratory use
- Supports air supply setup for motion and dynamics experiments
- Confirm air track end moulding and hose compatibility before ordering
- Bush only, air track and air blower are not included
- Check for secure fit and air leakage before use
- Use under appropriate laboratory or educational supervision
AUD 15.50 (Ex GST)
Air Track Air Tube Assembly Kit for 2 m and 2.5 m Models
- Air track air tube assembly kit only
- Suitable for compatible IEC 2 m and 2.5 m air tracks
- Same assembly kit is used for both 2 m and 2.5 m air track models
- Normally supplied with the air tube, but also available separately
- Includes sets of feet for air track support
- Includes level adjusting screws for track alignment
- Includes end caps, O-ring seals and tube screws
- Includes metric tape to suit the length of the track
- Includes end plug for blocking the air
- Complete with instructions
- Useful for air track setup, maintenance and replacement workflows
- Use under appropriate laboratory or educational supervision
AUD 160.90 (Ex GST)
Air Track Air Tubes, 2 m and 2.5 m, with End Seals
- Replacement air tube assemblies for compatible IEC air track systems
- Available in 2 m and 2.5 m air tube lengths
- Drilled and anodised air tube construction
- Supplied complete with assembly kit
- Assembly kit includes end caps, feet and related setup components
- Air tube only, operational experiment kit is not included
- 2.5 m complete basic air track reference listed as LC-80-MF0105Z-001
- 2 m complete basic air track reference listed as LC-80-MF0107Z-001
- Optional air blower and hose listed as LC-80-LB0115-002
- Optional photogate kit listed as LC-80-MF0138-001
- Optional electronic timer listed as LC-80-LB4064-101
- Confirm track length, accessory compatibility and setup requirements before ordering
From AUD 362.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.