Air Track Spark Paper, Motion Recording Roll Black and White
- Spark recording paper rolls for compatible air track timing systems
- Supports dot pattern recording for motion and velocity experiments
- White spark paper roll is stated as 20 mm wide × 180 m long
- Black spark paper roll is stated as 20 mm wide × 10 m long
- White paper is placed over black spark paper during recording
- Spark passage forms black dots on the underside of the white paper
- Suitable for supervised laboratory and educational air track experiments
From AUD 18.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Pen Pair, Left and Right Hand
- Spark pen pair for compatible air track gliders
- Supplied as left hand and right hand pair
- New wire style design as listed
- Designed to fit any compatible air track glider
- Used for spark timing and paper track experiments
- Suitable for motion, velocity and acceleration investigations
- Practical spare or replacement accessory for air track setups
- Useful for school, university and teaching laboratory use
- Confirm spark timer and glider compatibility before ordering
- Spark pens only, glider and air track are not included
- Use only with approved spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
AUD 38.50 (Ex GST)
Air Track Spark Recording Kits without generator
- Spark recording kit for compatible IEC air tracks
- Available for 2 m and 2.5 m air track models
- Supplied without spark generator
- Spark generator required is LC-80-LB0118-001
- Includes special insulated tracks for carrying spark electrodes
- Includes insulated tracks for carrying paper tapes
- Pens fitted to gliders carry sparks to the paper tape
- Supports friction-free air track operation during recording
- Spark marks create black dots on the paper tape
- Dot spacing can be measured to calculate velocity and acceleration
- Suitable for physics motion and mechanics experiments
- Use under appropriate laboratory or educational supervision
From AUD 389.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Track Earth Cable and Screw
- Earth cable accessory for compatible air track spark track setups
- Designed to earth the paper track back to the air track tube
- Suitable for approved spark timing and paper track experiments
- Supplied with flat top screw and nut as listed
- Includes cable and banana plug as listed
- Practical spare or replacement part for air track spark systems
- Useful for school, university and teaching laboratory use
- Supports motion, timing and displacement recording experiments
- Confirm spark track and air track compatibility before ordering
- Earth cable assembly only, spark track and air track are not included
- Use only with approved spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
AUD 13.50 (Ex GST)
Air Track Spark Track EHV Strip Guides
- EHV spark track strip guide for compatible air track systems
- Long plastic strip guide with metal strips as listed
- Available for later model 2.0 m air tracks
- Available for later model 2.5 m air tracks
- Designed for fitting to the side of compatible later model air tracks
- Suitable for approved spark timing and paper track experiments
- Practical spare or replacement part for air track spark systems
- Useful for motion, displacement, velocity and acceleration demonstrations
- Confirm track length and later model compatibility before ordering
- Strip guide only, air track and spark timer are not included
- Use only with approved EHV spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
From AUD 173.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Track Paper Guides
- Paper guide accessory for compatible air track spark track systems
- Long plastic paper guide with metal strip as listed
- Available for later model 2.0 m air tracks
- Available for later model 2.5 m air tracks
- Designed for fitting to the side of compatible later model air tracks
- Supports approved spark timing and paper track recording experiments
- Practical spare or replacement part for air track spark systems
- Useful for motion, displacement, velocity and acceleration demonstrations
- Confirm track length and later model compatibility before ordering
- Paper guide only, air track and spark timer are not included
- Use only with approved spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
From AUD 87.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Stop Block Carrier, Felt Lined
- Felt lined carrier for compatible air track stop block assemblies
- Designed to carry the heavy cast iron stop block
- Suitable for approved air track booster kit setups
- Joins to the stop block using suitable screw and nut hardware
- Practical spare or replacement support component for air track systems
- Helps position the stop block during motion and collision experiments
- Useful for school, university and teaching laboratory use
- Compatible with selected air track stop block arrangements
- Confirm stop block and fixing hardware compatibility before ordering
- Carrier only, stop block is not included unless specified separately
- Screw and nut are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 37.90 (Ex GST)
Air Track Stop Block Screw and Nut for Attachment
- Screw and nut set for compatible air track stop block attachment
- Designed for fixing a heavy cast stop block to a felt lined support
- Suitable for compatible air track stop block assemblies
- Practical spare or replacement hardware for air track maintenance
- Supports approved air track motion and collision experiment setups
- Useful for school, university and teaching laboratory use
- Helps secure the stop block in the correct support position
- Confirm screw, nut and stop block compatibility before ordering
- Screw and nut only, stop block is not included
- Felt lined support is not included unless specified separately
- Check attachment security before operating the air track
- Use under appropriate laboratory or educational supervision
AUD 2.90 (Ex GST)
Air Track Stop Block, Heavy Cast Iron
- Heavy cast iron stop block for compatible air track systems
- Designed as a fixed stop block for air track experiments
- Fits to a compatible felt lined support
- Secured using suitable screw and nut hardware
- Practical spare or replacement component for air track setups
- Supports approved motion, collision and dynamics demonstrations
- Useful for school, university and teaching laboratory use
- Helps provide a defined stop or impact point during selected experiments
- Confirm felt lined support and fixing hardware compatibility before ordering
- Stop block only, screw and nut are not included unless specified separately
- Air track, glider and support accessories are not included
- Use under appropriate laboratory or educational supervision
AUD 51.50 (Ex GST)
Air Track Sub Base Adjusting Stud with Square Head and Knob
- Adjusting stud assembly for compatible later model air tracks
- Used for joining underside of air track to upper side of sub base
- Metal stud construction
- Square plastic head listed
- Blue adjusting nut included as listed
- Helps adjust straightness of the air tube
- Suitable for later model air track and sub base setups
- Practical spare or replacement part for air track maintenance
- Useful for school, university and teaching laboratory use
- Confirm air track and sub base compatibility before ordering
- Stud, square head and knob assembly only, air track is not included
- Use under appropriate laboratory or educational supervision
AUD 7.50 (Ex GST)
Air Track Sub Base Kits, 2 m and 2.5 m
- Optional sub base kits for compatible air track systems
- Available for 2 m and 2.5 m air tracks
- 2 m version is listed as a 10 stud kit
- 2.5 m version is listed as a 12 stud kit
- Supplied complete with assembly kit
- Mounts below the air tube for added support
- Adjustable screws help pull the air tube as straight as possible
- Designed to improve air track alignment and performance
- Feet are removed from the tube and fitted to the sub base
- Commonly used to improve straightness of 2.5 m or longer air tracks
- Suitable for physics classrooms and teaching laboratories
- Use under appropriate laboratory or educational supervision
From AUD 249.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Tape Measure, Fibreglass, 3 m Long
- Tape measure accessory for compatible air track systems
- 3 m long fibreglass tape measure
- Width listed as 16 mm
- Designed to fit the slot in the edge of the air tube
- Can be cut to the required length during installation
- Useful for position, distance and displacement measurements
- Suitable for motion, velocity and acceleration experiments
- Practical spare or replacement scale for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm air tube slot size and required length before ordering
- Tape measure only, air track is not included
- Use under appropriate laboratory or educational supervision
AUD 6.50 (Ex GST)
Air Tracks, 2 m and 2.5 m, Complete with Kits
- Complete air track systems for physics and mechanics experiments
- Available in 2 m and 2.5 m track lengths
- Supplied complete with assembly kit and operation kit
- Designed for low-friction motion demonstrations using air support
- Suitable for velocity, acceleration, momentum and collision experiments
- Optional air blower and hose listed as LC-80-LB0115-002
- Optional photogate kit listed as LC-80-MF0138-001
- Optional electronic timer listed as LC-80-LB4065-101
- Optional sub base and assembly kit available for each track length
- Optional spark recording kit available for each track length
- Optional spark generator and cables listed as LC-80-LB0118-001
- Use under appropriate laboratory or educational supervision
From AUD 896.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air-Cored Copper Solenoid for Magnetic Field Experiments
- Air cored solenoid for laboratory and educational use
- Contains 700 turns of copper wire as listed
- Maximum current listed as about 5 A
- Formed on a strong moulded plastic bobbin
- Size listed as 150 mm long with 37 mm bore
- Suitable for Mass of Electron experiments with a “Magic Eye” tube
- Can be used with IEC Current Balance apparatus
- Can be used for calibrating IEC Hall Effect apparatus
- Useful where a magnetic field of known field strength is required
- Wire terminates to 4 mm socket head terminals
- Terminals point inward so the solenoid ends can sit flat on the table
- Use under appropriate laboratory or educational supervision
AUD 165.90 (Ex GST)
Alcohol Burner Stand, Stainless Steel, 105 x 130 x 70 mm
- Alcohol burner stand for use with compatible alcohol burners
- Made from stainless steel for durable routine laboratory use
- Dimensions are listed as 105 x 130 x 70 mm, L x H x W
- Designed to support simple heating setups in science and laboratory environments
- Stainless steel construction supports easy cleaning and repeated handling
- Compact stand format supports practical bench use during demonstrations
- Suitable for schools, universities, teaching laboratories and general laboratory workflows
- Alcohol burner size, vessel compatibility, heating setup and safety procedure should be confirmed before use
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
- Black insulated alligator clips for laboratory electrical connections
- Shank accepts compatible 4 mm banana plugs as specified
- Pack of 10 supports classroom and laboratory circuit setups
- Insulated shank supports safer handling during supervised practical work
- Suitable for temporary connections in teaching and demonstration circuits
- Useful for physics, electronics and general laboratory electrical activities
- Confirm 4 mm plug compatibility and circuit limits before use
From AUD 15.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Allihn Bulb Condenser Borosilicate Glass BORO 3.3 for High Efficiency Reflux
- Restricted Item – EUD Required: For condensers an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed for efficient reflux with multiple bulbs increasing cooling surface area
- Ideal for organic chemistry, solvent purification, and extended heating cycles
- Precision-crafted interchangeable joints fit standard laboratory glassware
- Made from durable BORO 3.3 glass with excellent thermal and chemical resistance
- Provides stable condensate flow for reliable, repeatable performance
- Manufactured to ISO 3585 and ASTM E438 Type I, Class A standards
From AUD 49.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Allihn Condenser Soxhlet Extraction BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Ideal for Soxhlet extraction setups, ensuring efficient solvent vapor condensation
- Multi bulb surface design increases cooling contact for higher recovery rates
- Made from BORO 3.3 glass for excellent thermal and chemical resistance
- Interchangeable joint compatibility with standard laboratory glassware
- Suitable for research, organic chemistry extraction and teaching labs
From AUD 69.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Alnico Bar Magnet Pairs with Keepers, Permanent Magnet Demonstration
- Alnico bar magnets designed for physics experiments and educational magnetism demonstrations
- Manufactured from Alnico (aluminium, nickel and cobalt-based magnetic alloy)
- Available in three lengths: 50 mm, 75 mm and 100 mm
- Standard width of 12 mm and thickness of 8 mm across all variations
- Supplied as a pair of permanent bar magnets with magnetic keepers
- Each magnet features north and south magnetic poles
- Keepers help preserve magnetic strength during appropriate storage
- Suitable for demonstrating magnetic attraction, repulsion and magnetic field patterns
- Supports investigations of magnetic forces and interactions with ferromagnetic materials
- Reusable construction for repeated classroom physics experiments
- Suitable for use with compasses, iron filings and other compatible magnetic demonstration equipment
- Ideal for secondary schools, universities and educational physics laboratories
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Alnico Horseshoe Magnet for Pole Interaction and Attraction Experiments
- Alnico horseshoe magnets designed for laboratory magnetism experiments and educational physics demonstrations
- Manufactured from Alnico, a permanent magnetic alloy containing aluminium, nickel and cobalt
- Available in five sizes: 25 mm, 50 mm, 75 mm, 100 mm and 150 mm
- Classic U-shaped horseshoe design with north and south magnetic poles
- Permanent magnetic construction produces a magnetic field without an external power supply
- 25 mm variation features a red finish and marked N and S magnetic poles
- 25 mm magnet has an approximate lifting capacity of 300 g under specified conditions
- 50 mm variation measures 50 mm in overall height, with an approximate bottom width of 40 mm
- Suitable for demonstrating magnetic attraction, repulsion and magnetic field patterns
- Can be used with iron filings, plotting compasses and compatible physics apparatus
- Reusable construction for repeated classroom demonstrations and experiments
- Ideal for secondary schools, universities and educational physics laboratories
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Aluminium Caps for Crimp Top Chromatography Vials
- Aluminium caps designed for crimp top chromatography vials
- Suitable for secure vial sealing in GC and HPLC laboratory applications
- Help support reliable sample closure during handling, storage, and analysis
- Practical choice for routine chromatography workflows in research and quality control laboratories
- Designed for use where consistent cap fit and dependable sealing are important
- Suitable for analytical sample preparation and autosampler vial setup
- Reliable closure option for everyday laboratory chromatography use
From AUD 29.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Aluminium Dissecting Dish with Wax, 330 × 230 × 70 mm
- Aluminium dissecting dish for biology and laboratory use
- Supplied with wax lining for specimen pinning
- Internal dimensions listed as 330 × 230 × 70 mm
- Durable dissecting pan suitable for general use
- Wax surface easily holds compatible T pins
- Wax resists absorption of most solutions
- Supports simple rinse and pour clean-up after approved use
- Suitable for dissection, specimen handling and teaching workflows
- Wax can be resurfaced by carefully melting on a hot plate
- Use with appropriate PPE and laboratory supervision
- Handle heated wax and sharp pins carefully
- Intended for laboratory or educational settings only
AUD 72.50 (Ex GST)
Aluminium Pulleys, 50 mm Diameter, Single, Double and Triple
- Aluminium pulleys for physics and mechanics experiments
- 50 mm diameter pulley size listed
- Suitable for basic force, motion and work demonstrations
- Available in single sheave, double, double in-line and triple in-line configurations
- Useful for pulley system and mechanical advantage experiments
- Supports lessons on tension, effort force and load movement
- Suitable for use with compatible string, masses and support apparatus
- Practical teaching apparatus for school and university laboratories
- Aluminium construction for routine educational use
- Confirm mounting style and experiment setup before use
- Keep fingers clear of moving pulley parts during operation
- Use under appropriate laboratory or educational supervision
From AUD 9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Aluminium Siren Disc, 175 mm Diameter with 10/6 mm Stem
- Aluminium siren disc for sound and frequency demonstrations
- Disc diameter listed as 175 mm
- Complete with 10/6 mm stem
- Mounted design allows the disc to be rotated during demonstration
- Includes 4 rows of holes around the disc
- Hole counts listed as 24, 30, 36 and 48
- Hole ratio of 4:5:6:8 supports musical chord demonstration
- Produces a siren tone when a fine jet of air passes through rotating holes
- Suitable for sound, pitch, vibration and wave teaching activities
- Use under appropriate laboratory or educational supervision
AUD 78.50 (Ex GST)
Aluminium Z-Shape Test Tube Rack
- Z-shape aluminium test tube rack for laboratory use
- Designed to hold multiple tube diameters
- Includes 8 holes for 13 mm tubes as listed
- Includes 6 holes for 19 mm tubes as listed
- Includes 5 holes for 28 mm tubes as listed
- Suitable for test tubes and compatible laboratory tubes
- Aluminium construction as listed
- Compact bench-top rack format
- Dimensions listed as 203 × 115 × 76 mm
- Useful for school, university and teaching laboratories
- Confirm tube diameter and fit before use
- Use under appropriate laboratory or educational supervision
AUD 18.90 (Ex GST)
Amber Apothecary Reagent Bottle, Wide Mouth with Glass Stopper
- Amber glass helps protect light-sensitive reagents, dyes, and indicators from UV exposure
- Wide mouth design supports easy filling, pouring, and cleaning, ideal for powders and viscous liquids
- Made from Soda Lime Glass Soda Lime Glass for excellent chemical resistance and thermal stability
- Suitable for routine laboratory storage in schools, universities, research, and QC labs
- Durable, lab-grade construction for reliable everyday handling and repeated use
From AUD 11.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Save 15%
Amber Burette with PTFE Stopcock, Class A Accuracy, BORO 3.3
- Class A accuracy burette for precise titrations in analytical, QC, and teaching laboratories
- Amber BORO 3.3 borosilicate glass helps reduce light exposure for UV-sensitive solutions
- High chemical resistance and excellent thermal stability for routine wet chemistry use
- Smooth-flow PTFE stopcock provides fine control, low friction operation, and strong sealing
- Clear, easy-to-read graduations for reliable meniscus alignment and repeatable results
- Ideal for acid-base titrations, redox titrations, and standardisation work in Australian labs
From AUD 59.42 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Save 15%
Amber Burette with PTFE Stopcock, Class B Accuracy, BORO 3.3
- Class B accuracy burette for routine titrations and general laboratory dispensing
- Made from BORO 3.3 borosilicate glass for strong chemical resistance and thermal stability
- PTFE stopcock provides smooth flow control, reliable sealing, and low friction operation
- Clear graduations support quick, consistent meniscus reading during practical work
- Suitable for education labs, research prep, and QC tasks where Class B tolerance is acceptable
- Ideal for acid-base titrations, reagent dispensing, and standard solution preparation.
From AUD 38.17 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Amber Culture Media Tubes Flat Bottom, BORO 3.3
- Manufactured from high-quality BORO 3.3 borosilicate glass for excellent thermal and chemical resistance
- Amber glass construction protects light-sensitive culture media and samples from UV and visible light exposure
- Flat bottom design provides improved stability when placed on laboratory benches or racks
- Suitable for culturing, storage, incubation, and handling of biological and chemical samples
- Resistant to repeated sterilisation cycles, including autoclaving, without loss of performance
- Ideal for use in research laboratories, educational institutions, clinical labs, and quality control environments
- Supplied by LabChoice Australia, designed for reliable routine laboratory applications
From AUD 179.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Amber Desiccator with Plain Lid
- Amber soda lime glass desiccator for low-moisture sample storage
- Plain lid supports routine protected storage over suitable desiccants
- Amber glass helps reduce light exposure for sensitive stored materials
- Suitable for hygroscopic reagents, dried samples and reference materials
- Smooth glass surfaces support practical cleaning between laboratory uses
- Designed for routine laboratory, teaching and QC storage workflows
- Confirm sample, desiccant and cleaning compatibility before use
Amber Dropping Bottle with Pipette, BORO 3.3 Glass
- Amber BORO 3.3 borosilicate glass helps protect light sensitive reagents, indicators, and solutions from degradation
- Integrated pipette dropper enables controlled, accurate dropwise dispensing for repeatable dosing
- High chemical resistance suitable for many acids, stains, dyes, and laboratory reagents
- Low thermal expansion improves durability and resistance to thermal shock in routine lab handling
- Secure dropper assembly helps reduce contamination risk and limits evaporation between uses
- Ideal for analytical labs, research, education, and QC applications across Australia, supplied by LabChoice Australia.
From AUD 18.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Amber Dropping Bottles with Pipette, Soda Lime Glass
- Amber glass dropping bottles for laboratory and educational use
- Available in 60 mL and 125 mL capacity variations
- Manufactured from soda lime glass for routine laboratory applications
- Amber-coloured bottles help reduce light exposure to stored contents
- Supplied with polystopper for controlled liquid dispensing
- Clear glass dropper specified for the 60 mL variation
- Suitable for compatible reagents, indicators and laboratory solutions
- Both sizes supplied in convenient packs of 12 bottles
- Outer carton quantities of 144 pieces for 60 mL and 96 pieces for 125 mL
- Ideal for chemistry, research, analytical and educational laboratories
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.