E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Old Style Brass Glider Weights
From AUD 13.90 (Ex GST)
From AUD 13.90 (Ex GST)
- Old style brass weights for compatible air track gliders
- Available in 50 g and 100 g options
- Brass block design for fitting inside the glider spine
- Designed to clamp inside compatible old style gliders
- Used to increase or adjust glider mass during experiments
- Supports motion, momentum and collision demonstrations
- Suitable for school, university and teaching laboratory use
- Practical spare or replacement part for older air track setups
- Confirm old style glider compatibility before ordering
- Weight only, glider and air track are not included
- Check the weight is securely clamped before use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Track Old Style Brass Glider Weights, 50 g and 100 g, also known as old style air track glider mass blocks, are designed for compatible older air track glider systems. These weights are brass blocks that clamp inside the glider spine, allowing users to add mass to the glider for approved physics experiments. Available options include a 50 g brass glider weight and a 100 g brass glider weight, allowing users to select the required mass for their existing old style glider setup. The added weight supports practical demonstrations where glider mass affects acceleration, momentum, kinetic energy and collision behaviour on a low-friction air track.
These weights are useful for lessons covering Newton’s laws of motion, force and acceleration, conservation of momentum, collision comparison and air track-based dynamics. Users should confirm the air track glider model, old style spine design, clamp fit, selected mass and experiment requirements before ordering or use. The weight should be clamped securely inside the glider spine before the glider is operated. Do not use if the weight is loose, damaged or incompatible with the selected glider. Keep hands, loose clothing and fragile items clear of moving gliders during air track operation.
Small brass weights should be handled carefully and stored securely when not in use to reduce loss, drop hazards and small-part risks. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the selected old style brass glider weight only. Air track, glider, blower, screws, timers, photogates, cables and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Glider Weights and spare parts for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical components for maintaining air track motion experiment equipment.
ECOVAC Economical Vacuum Aspirator, 2L
Student Triple Range DC Voltmeter, Physics Lab Voltage Teaching Meter
From AUD 43.90 (Ex GST)
Amber Reagent Bottle, Narrow Mouth with Screw Cap, Graduated, Borosilicate Glass (BORO 3.3)
From AUD 9.95 (Ex GST)
Thermometer Cone Adapter, Borosilicate Glass with Threaded Top
From AUD 21.00 (Ex GST)
Buchner Funnel Porcelain, Heavy Duty
From AUD 13.50 (Ex GST)
Silicone High Vacuum Grease, 211 Compound, 50 g Pack
AUD 22.90(Ex GST)
Expansion Adapter, BORO 3.3 Glass
From AUD 19.90 (Ex GST)
Block for Epp Tubes
From AUD 255.00 (Ex GST)
Air Table Circular Magnet for Small Puck
AUD 12.50(Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From AUD 7.50 (Ex GST)
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
From AUD 8.50 (Ex GST)
Air Table Pucks, Complete with Weights
From AUD 38.50 (Ex GST)
Air Table, Dynamics and Kinematics Model
From AUD 4.50 (Ex GST)
Air Track Replacement Parts and Accessories
From AUD 14.50 (Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From AUD 18.50 (Ex GST)
Air Track Spark Track Parts, Educational Mechanics Spare Set
From AUD 13.50 (Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From AUD 4.90 (Ex GST)
Air Track Stop Block for Track Systems
From AUD 2.90 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From AUD 13.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
Deflagrating Spoons with Aluminium Cap
From AUD 16.50 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
AUD 20.90(Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Air Track Magnet for Glider, Alnico, 50 g
AUD 13.90(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Air Track Spark Pen Pair, Left and Right Hand
AUD 38.50(Ex GST)
TOP RATED PRODUCTS
Air Track Magnet for Glider, Alnico, 50 g
AUD 13.90(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Air Track Spark Pen Pair, Left and Right Hand
AUD 38.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab