I-Gauge with BeeSpi V for Height, Speed and Impact Experiments
- I-Gauge apparatus with BeeSpi V for mechanics demonstrations
- Demonstrates the relationship between height and speed
- Also supports impact force observations on an object
- Includes 1 steel ball and 1 ceramic ball
- Ball diameter listed as approximately 25 mm
- Equipment size listed as 1050 × 100 × 185 mm
- Track length listed as 1000 mm
- Scale length listed as 500 mm
- Track angle adjustable from 0° to 45°
- Includes acrylic resin object block, approximately 40 × 80 × 14 mm
- BeeSpi V, S77-1321-W0, included as listed
- Use under appropriate laboratory or educational supervision
AUD 610.50 (Ex GST)
Ice Box 4°C Thermostatic Cooling Unit with Choice of 1 Optional Block
- 4°C laboratory cooling unit supplied with a choice of 1 compatible optional block
- Peltier-based temperature regulation supports stable and reliable 4°C cooling performance
- Rapid cooling reduces temperature from ambient conditions to 4°C in approximately 10 minutes
- Fixed 4°C temperature setting supports sensitive sample preservation and handling workflows
- Multi-colour LED indicators show operating status and system activity
- Magnetic block attachment allows quick and convenient module replacement
- Suitable for sample preservation, reagent cooling and controlled laboratory cooling processes
AUD 1,122.00 (Ex GST)
IEC Hot Plate Water Bath (Bath Only)
- Water bath designed for use with compatible IEC hot plates
- Supplied as bath only
- Allows water bath heating using an IEC hot plate as the heat source
- Can fit two compatible test tube stands
- Useful for low-cost biological and laboratory heating workflows
- Sliding ends rest on the work bench for stable support during use
- Sliding ends can move up to reduce storage size
- Can also be used as a dry oven where the method is suitable
- Optional thermostat control LC-80-CH4240-101 is purchased separately
- Use under appropriate laboratory or educational supervision
AUD 323.50 (Ex GST)
Immersion Cooler
- 580 watts cooling capacity supports immersion cooling below ambient conditions
- Stainless steel immersion coil has corrosion-resistant construction listed
- Mounting clamp fixes the immersion coil to any suitable tank during use
- Can cool 8 litres of water from 30°C to 5°C in about 25 minutes
- TH5 thermoregulator use provides at or below ambient temperature control
- R134a refrigerant is used with a ¼ HP air-cooled hermetic compressor
AUD 5,749.00 (Ex GST)
Immersion Heater Circulator
- Digital, precision, hi-temp and programmable models suit varied bath control
- Temperature ranges cover 0°C to 100°C, -30°C to 100°C and -30°C to +150°C
- High-flow circulation supports uniform temperatures in compatible laboratory baths
- Selected models include external pump-out for closed-loop circulation workflows
- Precision models provide ±0.02°C stability in insulated water bath with lid
- Programmable model stores 9 programs with 288 ramp and soak segments
From AUD 1,612.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Immersion Heater for Calorimeter Block Heating
- Immersion heater for compatible calorimeter blocks
- Designed for laboratory and educational calorimetry experiments
- Rated at 12 V and 50 W as listed
- Heater dimensions listed as 100 × 11.9 mm
- Lead length listed as 820 mm
- Compatible with TECHNOS calorimeter blocks as listed
- May not be compatible with all calorimeter blocks
- Check heater dimensions before purchasing
- Useful for heating metal calorimeter blocks in physics experiments
- Confirm power supply compatibility before use
- Immersion heater only, calorimeter block and power supply are not included
- Use under appropriate laboratory or educational supervision
AUD 62.50 (Ex GST)
In-Line Mini DC Ammeter, ±3 A Digital Current Meter
- In-line mini digital ammeter for DC current measurement
- Measurement range is stated as ±3 A
- Auto-switching display resolution supports low and higher current readings
- Supplied with alligator clip leads for direct circuit connection
- Polarity indicator shows plus or minus current direction
- Auto power off helps conserve the CR1220 lithium battery
- Compact 53 × 21 × 15 mm body for classroom circuit work
AUD 124.50 (Ex GST)
In-Line Mini DC Voltmeter, ±25 V Digital Meter
- In-line mini digital voltmeter for DC voltage measurement
- Measurement range is stated as ±25 V
- Auto-switching display supports low and higher voltage readings
- Supplied with alligator clip leads for direct circuit connection
- Polarity indicator shows plus or minus voltage direction
- Auto power off helps conserve the CR1220 lithium battery
- Compact 53 × 21 × 15 mm body for classroom circuit work
AUD 124.50 (Ex GST)
Individual Mineral Specimens For Display
- Individual mineral specimens for education and display, supports mineral identification, comparison and classroom geology activities
- Gypsum option specified satin spar, white fibrous, 10 pieces, country of origin stated USA, suitable for studying mineral form and texture
- Additional minerals listed halite granular, hematite black, hornblende, kaolinite, limonite and magnetite black, supports common teaching collections
- Range supports basic mineral tests and observation, use only small amounts and preferably wet sample or use on a tray as stated
- Safety guidance provided, avoid ingestion and dust, test only in ventilated areas with PPE, wash hands after handling, store intact away from moisture or heat, not intended for cosmetic, pharmaceutical or industrial use
From AUD 27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Individual Rock Specimens For Educational - Pack of 10 Pcs
- Educational rock specimens for geology identification and display, supports comparison of common rock textures, colour and grain size in practical lessons
- Bituminous coal samples listed as a named option, supports teaching on carbon rich sedimentary rocks and energy resource discussion
- Rock options include conglomerate and pink dolomite plus igneous and metamorphic types, supports rock cycle teaching and classification tasks
- Igneous rock options listed diorite, gabbro and red granite, plus metamorphic gneiss, supports contrasting grain size and mineral appearance
- Safety guidance provided, avoid ingestion and dust, do not grind, test only in ventilated areas with PPE, wet sample or tray use, wash hands, store dry, educational and display use only
From AUD 24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Infrared Digital Vortex Mixer with Flat Rubber Sleeve
- LCD screen displays real-time speed and time for easy adjustment and monitoring.
- Adjustable speed ranges from gentle to vigorous mixing to suit various needs.
- Dual-sided IR sensing for automatic tube detection and mixing, accommodating different user preferences.
- Stable with pressure-mounted accessories to prevent slippage and splashing.
- Brushless DC motor for high stability and maintenance-free operation.
- Sturdy base ensures stability during operation for safety.
- Includes various accessories for different sizes and types of tubes and plates.
- Low noise for a quiet working environment.
- Automatic start upon tube detection — no pressure required.
- Infrared sensing technology significantly reduces repetitive strain compared to traditional touch activation.
AUD 847.50 (Ex GST)
Inlet Thermometer Adapter with Vacuum Hose Connection, BORO 3.3 Glass
- Thermometer inlet adapter for compatible laboratory glassware
- Made from BORO 3.3 borosilicate glass
- Combines thermometer insertion with side hose connection
- Suitable for temperature monitoring during approved glassware setups
- Side serrated hose connection supports flexible tubing attachment
- Available joint sizes include 14/20, 19/22, 24/40 and 24/29
- Includes threaded compression cap for thermometer positioning
- Equipped with PP thermometer nut and internal silicone gasket
- Listed stable operating temperature is 100°C
- Useful for chemistry, teaching and general laboratory applications
- Confirm joint size, thermometer diameter and hose compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 39.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Inoculating Loop Holder, 200 mm
- Inoculating loop holder for microbiology workflows
- Overall length listed as 200 mm
- Designed to hold compatible inoculating loops
- Suitable for culture transfer and streaking demonstrations
- Used with inoculating loops for retrieving and transferring inoculum
- Supports plate streaking and smear preparation activities
- Compatible inoculating loops are sold separately under BI0974-01
- Suitable for school, university and teaching laboratory use
- Supplied as the holder only
- Use under appropriate laboratory or educational supervision
AUD 12.50 (Ex GST)
Inoculating Loops, 1 µL, Blue, Individually Wrapped
- 1 µL inoculating loops for microbiology workflows
- Blue colour-coded loop format
- Made from polypropylene material
- Hydrophilic treated for improved liquid handling
- Flexible handles support easier collection and inoculation
- Sterilised by ethylene oxide
- Easy-tear individual packaging
- Supplied as pack of 400
- Case quantity listed as 4000
- Suitable for culture transfer, plate streaking and smear preparation
- Use under appropriate laboratory or educational supervision
AUD 69.90 (Ex GST)
Inoculating Loops, 10 µL, Yellow, Individually Wrapped
- 10 µL inoculating loops for microbiology workflows
- Yellow colour-coded loop format
- Made from polypropylene material
- Hydrophilic treated for improved liquid handling
- Flexible handles support easier collection and inoculation
- Sterilised by ethylene oxide
- Easy-tear individual packaging
- Supplied as pack of 400
- Case quantity listed as 4000
- Suitable for culture transfer, plate streaking and smear preparation
- Use under appropriate laboratory or educational supervision
AUD 69.90 (Ex GST)
Inoculating Loops, 3 mm, Ni/Cr Wire, Pack of 10
- Inoculating loops for microbiology workflows
- Loop diameter listed as 3 mm
- Made from Ni/Cr wire
- Supplied as a pack of 10 pieces
- Designed for use with LC-80-BI0973-01 inoculating loop holder
- Used for retrieving and transferring inoculum
- Suitable for plate streaking and smear preparation activities
- Useful for microbiology teaching and laboratory demonstrations
- Holder is sold separately
- Use under appropriate laboratory or educational supervision
AUD 14.90 (Ex GST)
Save 32%
Iodine Flask with Ground Glass Stopper, Borosilicate Glass (BORO 3.3)
- Ground glass stopper provides airtight closure
- Ideal for iodine titration and volatile storage
- Conical shape minimizes vapor loss effectively
- Used in chemical analysis and iodine value tests
- Common in research, education, and industry labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Iodine Test Paper, Vial of 100 Strips
- Iodine test paper for laboratory and educational use
- Supplied as a vial of 100 strips as listed
- Detects iodine in compatible solutions
- Reading increments listed as 0, 12.5, 25 and 50 ppm
- Colour comparison indicates approximate iodine strength
- Test method requires 60 seconds contact time as listed
- Strip should be compared while still wet
- Useful for chemistry and sanitation-related demonstrations
- Disinfection range referenced between 12.5 ppm and 25 ppm
- Precision Laboratories disclaimer states not for medical device use
- Not intended to diagnose, treat, cure or prevent medical conditions
- Use under appropriate laboratory or educational supervision
AUD 19.90 (Ex GST)
Ion Sensor Cleaning Solution, 250 mL for Blood and Protein Residue Removal
- Cleaning solution for S051 calcium ion sensor
- Specially made for calcium sensor maintenance
- Helps remove blood and protein sample residues
- Supplied in practical 250 mL bottle size
- Supports routine care of compatible ion sensors
AUD 107.80 (Ex GST)
Iron Filings for Magnetic Field Experiments
- Iron filings for magnetic field experiments and demonstrations
- Suitable for school, university and teaching laboratory use
- Used to visualise magnetic field patterns around magnets
- Available as 100 g in screw top bottle
- Available as 500 g bulk pack
- Practical material for physics and magnetism activities
- Supports qualitative demonstrations of magnetic field lines
- Suitable for use with bar magnets, horseshoe magnets and magnetic field boards
- Store securely after use to reduce spillage and contamination
- Wear appropriate safety glasses and gloves when handling
- Keep away from eyes, mouth, sensitive electronics and magnetic storage media
- Use under appropriate laboratory or educational supervision
From AUD 7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Iron Funnel Holder on Stand, Four-Place Laboratory Type
- Four-place funnel holder supports up to four compatible funnels at one time
- Iron stand design provides stable support for routine laboratory use
- 500 mm rod supports adjustable height positioning during setup
- 23 mm hole diameter suits compatible laboratory funnel stems
- Space-saving structure helps organise funnel setups on the laboratory bench
- Suitable for filtration, liquid transfer and classroom chemistry practicals
- Designed for laboratory and educational use under appropriate supervision
AUD 41.50 (Ex GST)
Iron Slotted Weights and Hanger
- Heavy iron slotted weights for laboratory and education use
- Available as 0.5 kg and 1 kg individual slotted weights
- 1 kg iron slotted hanger available separately
- 0.5 kg weight made from cast iron with black hammer tone paint finish
- 0.5 kg weight measures approximately 80 mm diameter × 35 mm high
- 0.5 kg weight includes 10 mm wide slot
- 0.5 kg weight accuracy listed as ±5%
- 1 kg slotted weight measures approximately 95 mm diameter × 30 mm high
- 1 kg slotted weight tolerance listed as 1%
- 1 kg hanger measures approximately 440 mm high × 90 mm base × 9.5 mm rod
- 1 kg hanger is designed to take 9 × 1 kg slotted weights
- Use under appropriate laboratory or educational supervision
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed Coil Condenser BORO 3.3 Chemistry Grade
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High-efficiency vapour cooling with internal glass coil and full water jacket
- Extended condensation surface ideal for continuous reflux and high-boiling solvents
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438 Type I, Class A
- Excellent resistance to thermal shock, acids and organic solvents
- Smooth vapour flow and clean condensate return for reproducible results
- Interchangeable ground glass joints for easy integration with standard lab setups
From AUD 137.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed Reaction Beaker Double Wall BORO 3.3 Glass
- Double walled jacket design for precise heating or cooling
- Removable hose connectors for easy cleaning and fast setup changes
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438
- Ideal for controlled reactions, buffer prep and temperature sensitive work
- Clear graduations and stable wide form for accurate measurements
- Compatible with circulating water baths and thermostatic systems
Jacketed Round Bottom Double Wall Flask For Distillation BORO 3.3
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Double walled jacket design for controlled heating or cooling
- Round bottom shape supports uniform heat distribution during distillation
- Made from BORO 3.3 glass meeting ISO 3585 and ASTM E438 standards
- Ideal for fractional distillation, solvent recovery and essential oil processing
- Precision ground joint ensures secure, leak free system integration
- Reliable performance with circulating baths for accurate temperature control
From AUD 699.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed west Condenser BORO 3.3 Chemistry Grade
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Jacketed West condenser for compatible chemistry glassware setups
- Made from BORO 3.3 chemistry grade glass
- Available in 200 mm, 300 mm and 400 mm length options
- Joint options include 19/26, 24/29 and 24/40
- Jacketed design supports circulating coolant during operation
- Suitable for controlled condensation in compatible laboratory assemblies
- Confirm length, joint size, tubing fit and application suitability before use
From AUD 79.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
JAVAC Vacuum Pump, 2 Stage Oil Rotary Vane for Refrigeration and Air Conditioning
- JAVAC vacuum pump for laboratory, service and educational use
- JAVAC brand VCL 452 as listed
- 2-stage oil rotary vane vacuum pump
- Free air displacement listed as 45 L/min
- Ultimate vacuum listed as 15 micron
- 230 V, 50 Hz power supply as listed
- R32 and 1234yf compliant as listed
- Includes ballast valve
- Anti-oil demister helps prevent oil spillage
- Tri-connector suits 1/4", 3/8" and 5/16" SAE connections
- 12 months manufacturer’s warranty as listed
- Use under appropriate laboratory or educational supervision
AUD 475.90 (Ex GST)
Jerrican with Cap, Anti-Wobbling - Each
- Jerrican with Cap, anti-wobbling leakproof laboratory storage and transport type for liquids, reagents, and bulk sample handling
- Anti-wobbling design supports improved stability during storage, handling, and movement
- Secure cap closure helps reduce leakage risk during routine laboratory transport
- Integrated handle supports convenient carrying and controlled pouring
- Stable container format suitable for laboratory, cleanroom, production, and general liquid handling workflows
- Practical storage solution for applications requiring reliable sealing, easy handling, and improved container stability
From AUD 63.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jerrican with Cap, Leakproof Laboratory Storage and Transport Type - Each
- Jerrican with Cap, leakproof laboratory storage and transport type for liquids, reagents, and bulk sample handling
- Secure cap design helps support safe storage, handling, and movement during routine laboratory use
- Leakproof closure construction helps reduce spill risk during transport and storage
- Integrated handle design supports convenient carrying and controlled pouring
- Stable container format suitable for laboratory, cleanroom, production, and general chemical handling workflows
- Suitable for organised liquid storage where reliable sealing, easy handling, and practical identification are required
From AUD 61.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jointed Powder Funnel, BORO 3.3 Glass
- BORO 3.3 borosilicate glass powder funnel with ground joint for leak-reduced transfers
- Designed for clean, controlled pouring of powders and granules into jointed glassware
- Jointed connection helps minimise spillage and product loss during charging
- Chemically resistant, smooth glass surface for easier cleaning between samples
- Suitable for teaching labs, research labs, and general chemical handling workflows
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
- Joule’s calorimeter assembly for electrical heating experiments
- Includes 50 × 75 mm copper calorimeter cup, diameter × height
- Fitted with Joule’s insert for water-based calorimetry work
- Insert includes calorimeter lid and stirrer
- Includes 2 × 4 mm spin-free socket head IEC terminals
- Conducting rods support a 2 ohm resistance heating coil
- Designed for measuring electrical energy used to heat water
- Often used with Insulating Box and Lid LC-80-HL0830-001
- Suitable for supervised school and teaching laboratory experiments
AUD 69.90 (Ex GST)
Jumbo Concave and Convex Mirror for Light Reflection Experiments
- Jumbo concave/convex mirror for optics demonstrations
- Large 600 mm diameter mirror as listed
- Suitable for reflection and image formation experiments
- Focal length listed as 3.95 metres
- Useful for teaching concave and convex mirror behaviour
- Supports demonstrations of real and virtual images
- Practical visual aid for classroom physics and optics lessons
- Protective film should be removed before use
- Suitable for school, university and teaching laboratory use
- Confirm mounting method and demonstration distance before use
- Handle carefully to avoid surface damage
- Use under appropriate laboratory or educational supervision
AUD 205.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.