High Speed Homogenizer with Stand and Shaft for Solid-liquid Mixing 10-5000 mL Capacity, 10000-30000 rpm
- High shear homogenizer package for solid-liquid mixing, dispersion, emulsification and sample pre-treatment
- Supplied with stand and dispersing shaft for 10 to 5000 mL processing volume
- Speed range from 10000 to 30000 rpm with 6-stage speed control
- Dispersing shaft supports 23.5 m/sec maximum circumferential speed
- Maximum viscosity is listed as 10000 mPa·s for suitable homogenising applications
- SS 316L stainless steel and PTFE shaft construction supports compatible laboratory use
- Overload protection, smooth motor start and stable acceleration support controlled operation
AUD 4,510.00 (Ex GST)
High Speed Refrigerated Centrifuge with Package up to 16000 rpm
- High-speed refrigerated centrifuge with maximum speed of 16,000 rpm and maximum RCF of 28,621 × g
- 7-inch touchscreen display supports intuitive control, easy setup and efficient routine operation
- Temperature range from -10°C to 40°C supports temperature-sensitive separation workflows
- Rapid cooling reaches 4°C from room temperature in as fast as 7 minutes
- Nine acceleration and nine deceleration levels support flexible sample handling and soft braking
- Compatible 200 mL round suspension basket set is available as a set of 4 with hanger, cup, lid and handle for 180 mL PP centrifuge bottles, 56.5 × 123 mm
- Stores up to 100 user-defined programs with dynamic balance detection and automatic rotor imbalance warning
AUD 19,000.00 (Ex GST)
High-Sensitivity Current Amplifier for Electromagnetic Induction
- High sensitivity amplifier for laboratory and educational use
- Converts very small currents into larger readable current
- Designed for Electromagnetic Induction apparatus LC-80-EM1740-001
- Converts microamp current into milliamp readings as listed
- Suitable for use with a normal student meter
- Extremely low input impedance as listed
- Gain adjustable from low up to about 1000:1
- Amplifies at very low input voltages
- Includes zero offset control for improved accuracy
- Includes gain control for amplification adjustment
- Powered by internal 9 V #216 dry cell
- Use under appropriate laboratory or educational supervision
AUD 119.90 (Ex GST)
High-Sensitivity Digital Electrometer for Low-Charge Measurement
- Digital electrometer for very small electrical measurements
- IEC digital electrometer as listed
- Measures small quantities of voltage, current and charge
- Voltage ranges listed up to 2000 mV
- Current ranges listed up to 2000 nA
- Charge range listed up to 2000 nC
- Very high impedance as listed
- Useful for electrostatic charge measurements
- Suitable for capacitor charging and insulation current experiments
- Supports demonstrations with electrostatic rods and Aepinus capacitors
- Do not connect to mains or high-energy circuits
- Use under appropriate laboratory or educational supervision
AUD 516.50 (Ex GST)
High-Speed Microcentrifuge with Multi Rotor, up to 15,000 rpm
- Adjustable speed range from 200 to 15,000 rpm delivers up to 21,380 × g
- Five rotor options accommodate 0.2, 0.5, 1.5, 2 and 5 mL tubes plus PCR 8-tube strips
- Timed operation from 30 seconds to 99 minutes, with HOLD mode for continuous running
- Nine adjustable acceleration and deceleration levels support different sample-handling requirements
- LCD displays operating parameters, with selectable speed and RCF monitoring
- Brushless DC motor operates at a specified noise level of ≤64 dB
- Motorised dual door lock, overspeed detection and internal diagnostics support safer operation
AUD 3,102.00 (Ex GST)
High-Speed Refrigerated Centrifuge, Multi-Rotor with Brushless DC Motor up to 15,000 rpm
- Adjustable speed range from 200 to 15,000 rpm delivers up to 21,380 × g
- Temperature control from −20°C to 40°C supports temperature-sensitive sample processing
- Reaches 4°C from room temperature in approximately 7 minutes using the pre-cooling function
- Five rotor options accommodate 0.2, 0.5, 1.5, 2 and 5 mL tubes plus PCR 8-tube strips
- Nine acceleration and deceleration levels support controlled starting and gentle braking
- Stores up to nine programs for frequently repeated centrifugation procedures
- Dual door locking, imbalance detection, overspeed protection and internal diagnostics support controlled operation
Hipipette Adjustable 12-Channel Manual Pipette, Fully Autoclavable and Colour-Coded
- Suitable for compatible universal pipette tips, supporting convenient tip selection for routine laboratory use
- Twelve-channel configuration supports simultaneous liquid transfer across compatible 96-well microplate rows
- Adjustable volume range from 0.5 to 10 µL with fine 0.01 µL increments
- Volume-lock mechanism helps prevent unintended volume changes during pipetting
- Elastic tip-loading system supports secure tip attachment and consistent sealing across all channels
- Lightweight ergonomic design and low plunger force help reduce hand strain during repetitive pipetting
- Fully autoclavable and UV-resistant construction supports laboratory contamination-control procedures
- Colour-coded design assists volume-range identification and organised pipette management
From AUD 980.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hipipette Adjustable 8-Channel Manual Pipette, Fully Autoclavable and Colour-Coded
- Suitable for use with compatible universal pipette tips for convenient laboratory tip selection
- Eight-channel configuration supports simultaneous liquid transfer across compatible 96-well microplate columns
- Adjustable volume range from 0.5 to 10 µL with fine 0.01 µL increments
- Four-digit volume display provides clear and precise visibility of the selected volume
- Volume-lock mechanism helps prevent accidental volume changes during pipetting
- 360° rotating head supports flexible positioning during microplate workflows
- Fully autoclavable and UV-disinfectable construction supports contamination-control procedures
From AUD 796.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hipipette Fully Autoclavable Colour-Coded Single-Channel Mechanical Pipette
- Adjustable volume range from 100 to 1000 µL for routine medium-volume liquid handling
- Fine 1 µL increment supports controlled volume selection across the working range
- Single-channel configuration suits individual sample, reagent, buffer and standard transfers
- Fully autoclavable without disassembly and suitable for UV sterilisation procedures
- Ultra-light body weighing less than 100 g helps reduce fatigue during repetitive pipetting
- One-button volume lock helps prevent accidental volume changes during liquid transfer
- Colour-coded scale supports quick volume-range identification and organised pipette management
From AUD 186.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hodson Light Box and Optical Set, 12 V
- Complete Hodson light box and optical set for classroom optics experiments
- Designed for basic optics, ray tracing and colour blending activities
- Light box is designed to take a 12 V × 30 W QI lamp
- Lamp socket allows one compatible light box to be plugged into another
- Stackable banana plugs are moulded to the cables
- Lens adjuster is designed so students cannot remove it
- Includes 3 slit formers for producing multiple rays
- Heat-resistant colour filters and plates are supplied in sets of 8
- Mirrors are described as efficient and virtually unbreakable
- Available as standard 12 V kit or with mini 240/12 V transformer
From AUD 190.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hodson Optical Bench and Lens Kit
- 1.5 m optical bench for reflection, refraction, lens and image formation experiments
- Adjustable metric scale supports repeatable positioning and measurement during practical work
- Includes convex and concave lenses for focal length and image formation studies
- Supplied with targets, photographic slides, white screen and sliding component supports
- Large prism and prism table support refraction, dispersion and prism-based demonstrations
- Available with Hodson light box source or as a lower-price kit without the light box
- Suitable for school physics laboratories and supervised optics teaching activities
From AUD 247.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
- Hoffman screw tubing clips for sealing compatible flexible tubing
- Designed to block air or gas flow by pinching tubing sides together
- Adjustable screw supports controlled closure pressure during use
- Projecting plate helps protect tubing from direct screw damage
- Hinged side bar allows fitting without access to tubing ends
- Available in 18, 20, 25, 30 and 40 mm maximum opening sizes
- Suitable for supervised laboratory and educational tubing workflows
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hofmann Voltameter Spare Carbon Electrodes, Pair
- Spare carbon electrodes for glass type Hofmann voltameter
- Supplied as a pair for replacement use
- Accessory designed for compatible Hofmann electrolysis apparatus
- Stopper size listed as 18 mm × 13 mm, top × bottom
- Not designed to fit LC-80-GE5600-01
- Suitable for classroom electrolysis demonstrations
- For laboratory or educational use under appropriate supervision
AUD 18.90 (Ex GST)
Hofmann Voltameter Spare Platinum Electrodes, Pair
- Spare platinum electrodes for Hofmann voltameter use
- Supplied as a pair for replacement or setup maintenance
- Designed to fit LC-80-GE5600-01 Hofmann voltameter
- Suitable for compatible glass Hofmann voltameter applications
- Can be adapted using rubber stopper #3, one hole type
- Tight stopper fit may require gentle insertion with water lubrication
- For laboratory or educational use under appropriate supervision
AUD 114.90 (Ex GST)
Hofmann Voltameter, All Plastic Electrolysis Type
- Hofmann voltameter for electrolysis demonstrations
- All plastic type, Australian designed and manufactured
- Includes 1 pair of platinum electrodes
- Robust classroom design for repeated educational use
- Supports demonstrations of water decomposition and gas collection
- Must be washed after each use for proper maintenance
- Use PPE when filling with acid solution and follow instructions carefully
AUD 302.90 (Ex GST)
Hollow Stoppers, High Quality Borosilicate Glass (BORO 3.3), Heavy Quality
- Lightweight hollow design reduces joint stress
- Precision-ground for airtight, leak-resistant sealing
- Durable and reusable for long-term use
- Ideal for flasks, condensers, and jointed glassware
- Used in chemistry, pharmaceutical, and academic labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.10 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Holographic Diffraction Gratings
- Holographic diffraction grating film produces clear, bright diffraction patterns for optics demonstrations
- Mounted as a 35 mm slide format, convenient for handling and alignment in classroom experiments
- Two grating densities available, 500 lines/mm and 1000 lines/mm, to compare diffraction spacing effects
- Supplier notes on film protection vary by model code, including versions with no film protection
- 1000 lines/mm range includes a model with film between very thin glass sheets as specified
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hooke’s Law Apparatus with Spring, Scale and Stand
- Complete Hooke’s Law apparatus for physics demonstrations
- Designed for studying spring extension under applied load
- Includes 15 cm adjustable scale as listed
- Scale is marked in millimetres
- Adjustable scale helps reduce parallax error
- Mounted on a sturdy 30 cm support rod
- Supplied with wooden base as listed
- Includes hook supporting a coiled spring
- Includes mass hanger and indicator as listed
- Suitable for force, extension and elasticity experiments
- Confirm required masses before ordering
- Use under appropriate laboratory or educational supervision
AUD 43.90 (Ex GST)
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
- Tension spring sets for Hooke’s Law mass and extension experiments
- Suitable for mechanics, force and elasticity demonstrations
- Available as non-proportional 5-spring or proportional 6-spring sets
- Non-proportional set includes mixed spring lengths, diameters and wire sizes
- Proportional set is designed with related spring dimensions and wire diameters
- Proportional springs include an eye at each end for hanging load setups
- Suitable for supervised physics laboratory and classroom use
From AUD 28.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Horizontal Plastic Clamp for Digital Vortex Mixer, 12 holes×15mL Test Tube (Circular plate)
- Horizontal plastic clamp for compatible digital vortex mixer use
- Circular plate design with 12 holes for 15 mL tubes
- Helps hold test tubes securely during vortex mixing
- Suitable for routine laboratory sample preparation workflows
- Practical accessory for organised multi-tube mixing
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Horizontal Plastic Clamp for Digital Vortex Mixer, 24 holes×1.5mL Test Tube (Circular plate)
- Horizontal plastic clamp for compatible digital vortex mixer use
- Circular plate design with 24 holes for 1.5 mL tubes
- Helps hold tubes in position during vortex mixing
- Suitable for routine laboratory sample preparation workflows
- Practical accessory for organised multi-tube mixing
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Horizontal Plastic Clamp for Digital Vortex Mixer, 6 holes×50mL Test Tube (Circular plate)
- Horizontal plastic clamp for compatible digital vortex mixer use
- Circular plate design with 6 holes for 50 mL tubes
- Helps hold larger test tubes securely during vortex mixing
- Suitable for routine laboratory sample preparation workflows
- Practical accessory for organised multi-tube mixing
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Hose Connection Adapter Bent BORO 3.3 Glass Laboratory Grade
- Connects and extends glassware joints for flexible lab setups
- Ideal for distillation, extraction, and reflux applications
- Provides airtight, precise connections between apparatus
- Heat and chemical resistant for demanding lab use
- Crafted from premium BORO 3.3 borosilicate glass
- High-quality product by LabChoice Australia
From AUD 23.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hot/Cold Thermopile on Heat Sink with Socket Terminals
- Thermopile hot / cold apparatus for laboratory and educational use
- Demonstrates the Peltier effect using a thermo-generator cell
- Flat plate junction produces one hot side and one cold side when DC is applied
- Mounted on heat sink as listed
- Supplied with 2 × 4 mm sockets as listed
- Allows DC connection through standard laboratory leads
- Heating and cooling effect is visually and physically observable
- Ice may form on the cold side under suitable conditions as listed
- Useful for teaching thermoelectric effects and energy transfer
- Suitable for physics, heat and electricity demonstrations
- Requires compatible DC power supply
- Use under appropriate laboratory or educational supervision
AUD 123.50 (Ex GST)
Human Anatomy Torso Model for Teaching
- Human anatomical torso models designed for biology education and anatomy demonstrations
- Available in three configurations: Male & Female, Half Life Size and Sexless
- Male & Female model stands 850 mm high and consists of 24 parts
- Features interchangeable male and female reproductive organs, including a fetal model within the uterus
- Sexless torso stands 850 mm high and consists of 17 parts
- Half Life Size model measures 520 mm high and is manufactured from plastic
- Removable anatomical structures support hands-on study of human organ systems
- Detailed representations of the brain, heart, lungs, digestive organs and spinal structures in the larger models
- Male & Female model features an exposed spine with removable vertebral and spinal cord components
- Colourful anatomical presentation helps students identify human body structures
- Suitable for schools, universities, biology classrooms and medical education
From AUD 224.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Circulatory Teaching Model, Large 3-Part Heart
- Large human heart teaching model for circulatory system demonstrations
- Shows external features and internal structures of the heart
- Demonstrates the heart’s relationship with large blood vessels
- Supports teaching of systemic and pulmonary circulation routes
- Dissectible into 3 parts for closer student inspection
- 4 times enlarged design supports clearer classroom visibility
- Made from PVC plastic, stated size 25 × 23 × 23 cm
AUD 114.90 (Ex GST)
Human Elbow Joint Anatomical Model with Ligaments
- IEC human elbow joint model designed for anatomy, biology and medical science education
- Three-dimensional anatomical model represents the human elbow joint with ligaments
- Illustrates the relationship between the humerus, radius and ulna at the elbow joint
- Features ligament representations to support studies of joint stability and structure
- Helps students understand elbow flexion, extension and forearm rotation principles
- Supports teaching of the humeroulnar, humeroradial and proximal radioulnar articulations
- Useful for explaining ligament function, joint movement and musculoskeletal anatomy
- Suitable for classroom demonstrations, anatomy lessons and practical biology studies
- Supplied as one anatomical teaching model for schools, universities and training labs
AUD 95.90 (Ex GST)
Human Hip and Leg Joint Anatomical Model with Ligaments
- IEC human hip and leg joint model designed for anatomy, biology and healthcare education
- Three-dimensional anatomical model represents the human hip joint with ligament structures
- Illustrates the relationship between the femoral head and the acetabulum of the pelvis
- Features ligament representations for studying hip joint stability and skeletal support
- Helps explain hip flexion, extension, abduction, adduction and rotational movements
- Demonstrates the structural principles of the human ball-and-socket synovial joint
- Overall model dimensions of 160 × 160 × 300 mm for classroom and laboratory displays
- Weighs approximately 0.9 kg for convenient handling during anatomy demonstrations
- Suitable for schools, universities, nursing, physiotherapy and medical training laboratories
AUD 105.90 (Ex GST)
Humidity Measurement Instruments For Laboratory
- Humidity measurement options include hair hygrometer dial, wet and dry bulb psychrometer styles and digital indoor outdoor thermometer hygrometer for flexible monitoring
- Hair hygrometer listed 0–100% RH with 1% divisions and ±4% RH accuracy, lightweight 12 g with stated 65 mm diameter body
- Mason’s wet and dry thermometer hygrometer explains RH calculation from wet bulb cooling versus dry bulb reading, supports teaching of evaporation and humidity concepts
- Whirling hygrometer includes slide rule calculator for %RH, LO-tox filled glass tubes, ABS casing, ranges stated -5 to +50°C with 0.5 divisions and ±1°C accuracy
- Digital indoor outdoor unit lists Brannan 13/420/3 with probe, max min memory, indoor RH 20–99%, temperature ranges and CE and ROHS/WEEE approvals, batteries included
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hybridisation Oven
- Holds up to 18 bottles, 50 mm diameter x 300 mm long, in compact oven body
- Microprocessor mixer control with tachometer for controlled carousel motion
- Motion interrupt cutout and over-temperature cutout listed as safety features
- Fan-assisted blower and spiral wound element provide the listed heater setup
- Control range from 28°C to 99.9°C with ±0.2°C control stability listed
- Timer supports 0 to 99 minutes or 0 to 99 hours with 3 preset settings
AUD 6,274.00 (Ex GST)
Hybridisation Oven Carousel Suit
- Carousel accessory designed for use with hybridisation ovens
- Supports secure rotation of bottles during hybridisation workflows
- Helps provide even sample exposure during incubation
- Suitable for molecular biology and laboratory applications
- Practical replacement or additional carousel for compatible ovens
- Supports organised bottle positioning inside the oven
From AUD 1,216.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hybridisation Oven Platform
- Converts HO35 into orbital or rocking mixer/incubator formats
- HO35OP and HO35RP platforms mount easily into the HO35 oven
- Loads straight onto HO35 rollers for removable platform setup
- Orbital platform provides 20 to 200 rpm speed range
- Rocking platform provides 10 to 100 rpm speed range
- Fitted nitrile mat supports containers during low-speed mixing
From AUD 1,366.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.