High-Speed Microcentrifuge with Multi Rotor, up to 15,000 rpm
$3,102.00(Ex GST)
$3,102.00(Ex GST)
- Adjustable speed range from 200 to 15,000 rpm delivers up to 21,380 × g
- Five rotor options accommodate 0.2, 0.5, 1.5, 2 and 5 mL tubes plus PCR 8-tube strips
- Timed operation from 30 seconds to 99 minutes, with HOLD mode for continuous running
- Nine adjustable acceleration and deceleration levels support different sample-handling requirements
- LCD displays operating parameters, with selectable speed and RCF monitoring
- Brushless DC motor operates at a specified noise level of ≤64 dB
- Motorised dual door lock, overspeed detection and internal diagnostics support safer operation
[request_quote_button]
- Description
Description
The High-Speed Microcentrifuge, also known as a compact high-speed laboratory centrifuge, is designed for rapid separation and sample preparation using a broad range of microcentrifuge tubes, PCR strips and 5 mL centrifuge tubes. Its five available rotor options allow laboratories to configure the instrument for different tube capacities and experimental workflows.
The centrifuge provides an adjustable speed range from 200 to 15,000 rpm and develops a maximum relative centrifugal force of 21,380 × g. RCF can be adjusted in 10 × g steps, allowing the operating force to be selected according to the tube format, sample type and validated laboratory method. Speed and RCF values can be switched for convenient monitoring during operation.
Available rotor configurations accommodate 24 × 1.5 or 2 mL tubes, 36 × 0.5 mL tubes, 4 × PCR 8-tube strips, 12 × 5 mL tubes or 18 × 5 mL tubes. This broad compatibility supports small-volume sample processing, PCR workflows, cell and molecular biology procedures, chemical sample preparation and research applications requiring different centrifuge tube formats.
Run times can be programmed from 30 seconds to 99 minutes, while HOLD mode enables continuous operation. Nine selectable acceleration and deceleration levels allow the centrifuge response to be adjusted for different sample requirements. Acceleration to maximum operating conditions and braking are specified at approximately 25 seconds each.
The LCD provides clear visibility of operating parameters and the running-process indicator allows users to follow centrifugation progress. Additional functions include program storage, inching operation for brief centrifugation, an audible completion alert and selectable speed or RCF display. The brushless DC motor supports repeated operation while maintaining a specified noise level of no more than 64 dB.
A motorised door-locking system supports convenient one-handed operation, while the dual door lock, overspeed detection and internal diagnostic system provide additional operational safeguards. The centrifuge measures 280 × 400 × 240 mm, weighs 8.8 kg and is available for either 200 to 240 V or 100 to 120 V, 50/60 Hz electrical supplies.
LabChoice Australia supplies this High-Speed Microcentrifuge for cell biology, molecular biology, PCR, chemistry, biotechnology, pharmaceutical research, university, research and industrial laboratories. It is suitable for high-speed separation, sample clarification, microtube processing, PCR sample preparation and routine centrifugation procedures performed with compatible rotors and validated laboratory protocols.
| Specification | Details |
|---|---|
| Speed range | 200-15000 rpm |
| Max. RCF | 21,380×g, step:10×g |
| Rotor capacity | 24×1.5/2 mL, 36×0.5 mL, 4×PCR-8 strips, 12×5 mL，18×5 mL |
| Run time | 30s-99min；HOLD (continuous running) |
| Acceleration/Braking time | 25s↑25s↓ |
| Display | LCD |
| Power | 210 W |
| Voltage/Frequency | Single-phase, 200-240V, 50Hz/60Hz，210W 100-120V, 50Hz/60Hz, 200W |
| Noise level | ≤64dB |
| Motor type | Brushless DC motor |
| Dimensions [WxDxH] | 280×400×240 mm |
| Weight | 8.8 kg |
| Safety performance | Dual door lock, over-speed detection, with Internal diagnosis system. |
Frequently Bought Together
Electrostatic Magic Wand Fly Stick Demonstration Kit
From $6.50 (Ex GST)
Laboratory Pulleys, Bench Clamp and Rod Mounting Physics Type
From $9.90 (Ex GST)
Glass Scintillation Vials, Seal Cone, White Cap, BORO 3.3
From $190.50 (Ex GST)
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
From $78.50 (Ex GST)
ASEP Metal Rod Set (8 Pieces), 3 mm Diameter
$39.90(Ex GST)
Reading and Inspection Magnifiers, Handheld and Standing Lens Range
From $8.90 (Ex GST)
Circuit Board D Cell Battery Holder
$8.50(Ex GST)
You May Also Need
10 Roller Tube Mixer
From $2,589.00 (Ex GST)
Digital Dry Block Heater, Four Block, 200°C
$1,844.00(Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Orbital Shaking Incubator
From $6,639.00 (Ex GST)
Plastic Coated Wire Bottle Carrier
$69.90(Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Save 25%
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $626.00 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Variable Speed Vortex Mixer, up to 2700 rpm
$542.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Newton’s Colour Disc, 23 cm, Hand Driven on Stand
$87.50(Ex GST)
Polaroid Filter Pair with Circular Scale, 100 × 100 mm
$68.50(Ex GST)
Polaroid Filter Pair with 90° Rotating Disc
$103.50(Ex GST)
TOP RATED PRODUCTS
Newton’s Colour Disc, 23 cm, Hand Driven on Stand
$87.50(Ex GST)
Polaroid Filter Pair with Circular Scale, 100 × 100 mm
$68.50(Ex GST)
Polaroid Filter Pair with 90° Rotating Disc
$103.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
