E
x
p
l
o
r
e
M
o
r
e
:
Mechanics & Fluids
Air Track Air Tube Assembly Kit for 2 m and 2.5 m Models
AUD 160.90(Ex GST)
AUD 160.90(Ex GST)
- Air track air tube assembly kit only
- Suitable for compatible IEC 2 m and 2.5 m air tracks
- Same assembly kit is used for both 2 m and 2.5 m air track models
- Normally supplied with the air tube, but also available separately
- Includes sets of feet for air track support
- Includes level adjusting screws for track alignment
- Includes end caps, O-ring seals and tube screws
- Includes metric tape to suit the length of the track
- Includes end plug for blocking the air
- Complete with instructions
- Useful for air track setup, maintenance and replacement workflows
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Air Track Air Tube Assembly Kit for 2 m and 2.5 m Models, also known as an IEC air track assembly accessory kit, is designed for setup, maintenance or replacement support for compatible air track systems. This is the air track air tube assembly kit only. It is normally supplied with the air tube, but is also available separately where replacement or servicing components are required. The kit is the same for both compatible 2 m and 2.5 m air tracks, supporting practical inventory management for school science laboratories, physics classrooms and university teaching laboratories.
The assembly kit mainly contains the sets of feet, level adjusting screws, end caps, O-ring seals and screws required for the air tube setup. It also includes the metric tape that fits the length of the track, supporting position measurement during air track motion experiments. The included end plug is used to block the air as part of the approved air track setup. This kit is useful for preparing or maintaining air tracks used in physics experiments involving motion, velocity, acceleration, momentum and low-friction glider demonstrations. Users should confirm compatibility with the specific IEC air track model before ordering or installation.
Level adjustment should be performed carefully so the air track is stable, aligned and suitable for the intended experiment method. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the Air Track Air Tube Assembly Kit with instructions only. Air tube, air track, blower, gliders, photogates, timer, power supply and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Assembly Kits for school science laboratories, physics classrooms, university teaching laboratories and STEM education environments requiring practical replacement and setup components for air track experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Metal Thermometer Clips, Quick Fit Holder for Heating Experiments
AUD 8.90(Ex GST)
Graduated Beaker with Handle, 250 ML BORO 3.3 Glass
AUD 11.90(Ex GST)
Sound Level Meter, 30 to 130 dB Classroom Acoustics Measurement Type
AUD 171.90(Ex GST)
Stoppers, Polypropylene, Reusable, Lab Grade Quality, High Quality
From AUD 2.20 (Ex GST)
Fixed PSSC Type Power Supply, 12 V AC Input, 100/200 V DC Output
AUD 217.90(Ex GST)
Circuit Board Kit, Worcester Pattern Complete
AUD 171.90(Ex GST)
Stainless Steel Probe, Double Ended 14 cm Fine Point
AUD 1.90(Ex GST)
You May Also Need
Adjustable Inclined Plane with Pulley and Angle Scale
From AUD 137.50 (Ex GST)
Air Track Air Tubes, 2 m and 2.5 m, with End Seals
From AUD 362.50 (Ex GST)
ASEP Powder-Coated Stream Tray
AUD 266.50(Ex GST)
Brass Slotted Weight Sets for IEC Weight Carriers
From AUD 14.90 (Ex GST)
Cartesian Diver, 100 mm Glass Archimedes Principle Demonstrator
AUD 7.50(Ex GST)
High Pressure Boyle’s Law Apparatus with Air Pump, Non-Mercury
AUD 387.90(Ex GST)
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
From AUD 28.90 (Ex GST)
I-Gauge Mechanics Demonstrator, Height and Speed Measurement Teaching Set
AUD 610.50(Ex GST)
Mini Electric Circular Motion Kit with Speed Control
AUD 211.90(Ex GST)
Mini Projectile Launcher, Student Mechanics Experiment with Protractor
AUD 136.90(Ex GST)
Scale Pans with Hooks, Laboratory Weighing Unit
From AUD 7.90 (Ex GST)
Simple Wheel and Axle Pulley Set, Two Sizes Included 150 mm and 75 mm
AUD 89.90(Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
AUD 42.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
TOP RATED PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab