E
x
p
l
o
r
e
M
o
r
e
:
Sound & Waves
Advanced Resonance Apparatus for Sound and Frequency Experiments
AUD 232.90(Ex GST)
AUD 232.90(Ex GST)
- Advanced resonance apparatus for laboratory and educational use
- Designed for sound resonance and air-column experiments
- Includes 1 m long vertical stand with metric scale as listed
- Uses a 20 mm plastic tube connected to a 1 L water vessel
- Water level in the tube is adjusted by raising or lowering the vessel
- Supplied with tuning fork as listed
- Supports resonance detection by listening at the tube mouth
- Helps determine resonant air-column lengths
- Useful for calculating wavelength and frequency relationships
- Suitable for sound, waves and acoustics teaching
- Keep water away from electrical equipment and bench edges
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Advanced Resonance Apparatus with 1 m Vertical Scale, also known as a resonance tube apparatus or air-column resonance apparatus, is designed for studying sound resonance in a controlled classroom or laboratory setup. The apparatus consists of a 1 m long vertical stand with metric scale and a 20 mm plastic tube connected to a 1 L vessel of water. The water vessel is raised or lowered to adjust the water level inside the tube. A tuning fork is provided so users can check for resonance by sounding the fork and listening at the mouth of the tube while the air-column length is adjusted.
When resonance is heard clearly, the corresponding air-column lengths can be marked or recorded from the vertical scale. These lengths can then be used in calculations involving wavelength, frequency and the speed of sound. This apparatus is suitable for teaching standing waves, resonance, sound wavelength, air-column behaviour and acoustic measurement in physics and general science practicals. Users should confirm the tuning fork frequency, tube condition, vessel capacity, water level movement, scale readability and classroom procedure before use.
Use the apparatus on a stable bench or demonstration area. Avoid spilling water, overfilling the vessel or placing the apparatus near electrical equipment. Handle the tuning fork, tube and stand carefully. Do not strike the tuning fork on hard glass, bench edges or unsuitable surfaces. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected resonance apparatus with 1 m vertical scale only. Additional tuning forks, water, thermometer, sound sensors, worksheets, clamps, PPE and additional acoustics accessories are not included unless specified separately.
LabChoice Australia supplies Resonance Apparatus and acoustics teaching equipment for school science laboratories, university teaching laboratories and educational facilities requiring practical demonstrations of resonance, standing waves and sound behaviour.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Benchtop 10-Key Digital Blood Cell Counter, 0-99 Count
AUD 274.00(Ex GST)
Save 25%
Thermostat Heat Control with Combined Hot Plates & Magnetic Stirrer
From AUD 715.00 (Ex GST)
Constant Volume Thermometer for Charles’ Law Experiments
AUD 267.50(Ex GST)
Constantan Resistance Wire, Laboratory and Education Resistance Wire Range
From AUD 31.50 (Ex GST)
Digital Wine Refractometer, 0 to 45% Brix, 0 to 22% VOL
AUD 549.50(Ex GST)
Porcelain Beehive Shelves, 75 mm or 100 mm Diameter, For Gas Collection Over Water
From AUD 5.90 (Ex GST)
Scintillation Vial (Sample Vial), BORO 5.0
From AUD 416.50 (Ex GST)
Digital Max Min Indoor Outdoor Thermometer
AUD 61.50(Ex GST)
Optical d-Timer Non-Contact Ticker Tape Timer
AUD 237.00(Ex GST)
You May Also Need
Aluminium Siren Disc, 175 mm Diameter with 10/6 mm Stem
AUD 78.50(Ex GST)
Anodised Aluminium Resonance Tube for Sound and Frequency Experiments
AUD 65.90(Ex GST)
Blued Steel Tuning Forks, Sound and Vibration Demonstration Range
From AUD 7.50 (Ex GST)
Chladni Plate Set (2 Plates) with Violin Bow and Sand Included
AUD 248.90(Ex GST)
Powell’s Pattern Wave Motion Apparatus with Rotating Scale
AUD 219.50(Ex GST)
Savart’s Tone Wheel Alloy STEM Apparatus, 73 mm Discs
AUD 109.90(Ex GST)
Siren Disc Blow Tube Only, Metal with Jet
AUD 9.50(Ex GST)
Sonometer Spare Set of Wires
AUD 18.90(Ex GST)
Sound Level Meter for Measuring Noise and Sound Levels
AUD 171.90(Ex GST)
Tuning Fork Set of 8, Blued Steel in Case
AUD 33.90(Ex GST)
Tuning Fork Set, 8 Pieces with Wooden Case and Hammer
AUD 118.50(Ex GST)
Tuning Forks on Resonance Boxes, Pair, 2 × 426.6 Hz
AUD 49.90(Ex GST)
Wave Demonstration Spring, Plastic Model for Physics
AUD 27.50(Ex GST)
Whirling Sound Pipe for Sound Resonance Experiments
AUD 11.50(Ex GST)
Wooden Hollow Sonometer, 1 m, Mersenne’s Law
AUD 120.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab