Save 8%
Adjustable Speed Tube Rotator for Laboratory Sample Mixing
Was: $611.69 $565.50 (Ex GST)
- Adjustable speed range from 0 to 80 rpm supports controlled tube mixing
- Gentle rolling action provides effective movement without vigorous agitation
- Scale-based speed control allows simple and direct manual adjustment
- Continuous operating mode supports extended laboratory mixing procedures
- Compatible with disk and rotisserie accessories for 1.5, 15 and 50 mL tubes
- DC motor operates from a universal 100 to 240 V, 50/60 Hz power supply
- Suitable for research, clinical, biotechnology, teaching and general laboratories
- Description
Description
The Adjustable Speed Tube Rotator, also known as a laboratory rotating mixer, provides gentle but effective rolling movement for samples contained in compatible sealed centrifuge tubes. Its straightforward design is suitable for routine laboratory procedures requiring continuous sample movement without the high-intensity agitation produced by vortex mixing.
The adjustable speed range from 0 to 80 rpm allows users to select an appropriate rotation rate according to the tube size, sample volume, liquid characteristics and laboratory method. Speed is adjusted using a scale-based control, providing simple manual operation for laboratories that do not require digital programming or timed cycles.
The rotator operates continuously and uses a 20 W DC motor to maintain consistent movement during extended laboratory procedures. Continuous operation is useful for sample preparation workflows where tubes must remain in motion for a sustained period, subject to the requirements of the laboratory protocol.
Compatible disk and rotisserie accessories are available for 1.5 mL, 15 mL and 50 mL centrifuge tubes. These accessory options allow the same rotator to support microcentrifuge samples, standard conical tubes and larger-volume centrifuge tube workflows. The appropriate accessory must be selected according to the required tube size and configuration.
The controlled rolling action can support routine mixing of sealed tube contents, maintenance of suspended materials, blending of laboratory reagents and preparation of samples before analytical procedures. It is suitable for biotechnology, molecular biology, biochemistry, clinical research, pharmaceutical, university, educational and general life-science laboratories requiring simple continuous tube rotation.
LabChoice Australia supplies this Economical Tube Rotator for laboratories requiring adjustable 0 to 80 rpm operation, continuous sample movement and compatibility with multiple centrifuge tube sizes. Its compact 150 × 530 × 190 mm dimensions, universal 100 to 240 V electrical input and specified operating range of 5 to 40°C support practical use in controlled laboratory environments.
| Specification | Details |
|---|---|
| Accessories type | Tube Rotator |
| Speed range | 0-80 rpm |
| Speed display | Scale |
| Run type | Continuous |
| Motor type | DC motor |
| Voltage | 100-240V |
| Frequency | 50/60Hz |
| Power | 20W |
| Dimension [D×W×H ] | 150 X 530 X 190 mm |
| Ambient temperature | 5-40℃ |
| Permissible ambient humidity | 80% RH |
| Protection class | IP21 |
Frequently Bought Together
LCD Digital Tube Rotator with 8-Place 50 mL Tube Holder Disk
$1,806.50(Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
$612.50(Ex GST)
Short Deck Single Layer Rocking Tube Rotator Brushless DC Motor
$496.50(Ex GST)
Long Deck Double Layer Rocking Tube Rotator Brushless DC Motor
$612.50(Ex GST)
Long Deck Single Layer Rocking Tube Rotator Brushless DC Motor
$554.50(Ex GST)
Round Handle Dissecting Needles, Stainless Steel Examination Range
From $3.50 (Ex GST)
10-Channel Magnetic Stirrer, Brushless DC Motor, up to 0.4 L Capacity
$2,447.50(Ex GST)
Laboratory Racks, Burette Draining and Cuvette Storage Type
From $14.90 (Ex GST)
Dropping Bottle with Pipette, BORO 3.3 Glass
From $10.90 (Ex GST)
Centre Zero Student Meter, DC Current Demonstration and Polarity Teaching Type
From $43.90 (Ex GST)
Cryogenic Tube, Hepta Foot, Sterile
From $151.50 (Ex GST)
Similar Products
10 Roller Tube Mixer
From $2,589.00 (Ex GST)
Block for Epp Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Mini Roller Mixers, Standard Tube and Bottle Laboratory Type
From $2,070.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $835.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab