Laboratory Tube and Cylinder Racks, Polypropylene Storage Type
- Polypropylene rack range for 1.5 ml tubes and 50 ml cylinders
- Includes 16 place floating rack with compact 1.5 ml tube capacity
- Includes Nessler cylinder rack holding 6 x 50 ml cylinders
- 27 mm diameter hole format supports the stated 50 ml cylinder size
- Tarsons product references included for clear product identification and selection
From $11.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Tubing, Rubber Silicone and Vacuum Pressure Range
• Tubing range includes rubber gas, silicone gas, and vacuum pressure options
• Gas tubing variations are supplied for Bunsen burner connection use
• Material choice includes rubber and silicone by stated application format
• Per metre supply supports flexible ordering by required tubing length
• Suitable for supervised laboratory and educational bench setup use
From $3.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Water Bath with Hot Plate
- Water bath powered by IEC hot plate, ends slide for stable bench use and compact storage
- Fits two test tube stands for low cost biological work and convenient sample warming
- Optional thermostat controller clips to bath edge, controls hot plate to hold constant temperature
- Controller element slides to inner corner, stays submerged even with small water volumes
- Wet or dry operation, dry oven use recommended with probe against bath wall to avoid overheating
From $190.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Weight Sets, Calibration Tray and Hooked Experiment Range
- Weight set range includes calibration, tray, and hooked experiment formats
- Double hooked calibration set covers 10 g to 1000 g range
- Tray version provides combined weighing range from 10 g to 1990 g
- Hooked 50 g x 10 set suits repeated physics experiment use
- Brass, iron, and steel components supplied in organised storage formats
From $30.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Large Demonstration Manometer, ±300 mm Range
- Large U-tube water manometer, ±300 mm range, mm water height demonstration
- 100 × 560 mm panel with wall-hanging ring, clear classroom visibility
- 12 mm clear PVC hose U-formed, durable, easy to fill and observe levels
- 400 mm scale between legs, quick reading of level difference and direction
- Top tube ends accessible for gentle blowing or low-pressure connections, gas pressure demos
$126.00 (Ex GST)
Laser View Prism and Bar Kits
- Specially moulded plastic prisms and bars make a laser beam visible through the material path
- Prism shapes match Hodson light box kit, bars include long straight and curved new mouldings
- Bars demonstrate internal reflection and optical fibre behaviour, supports photonics curriculum teaching
- Kit options: full set 8 parts, part set 6 shapes, or bars only set with two bars
- Designed for classroom optics demonstrations where beam tracing inside solids is required
From $83.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Law of Conservation of Mass Apparatus Bottle
- Sealed reaction bottle supports clear demonstration of conservation of mass during gas-producing chemistry experiments
- Designed for before and after mass comparison to help students observe constant total mass results
- Uses hydrochloric acid and sodium hydrogen carbonate for a practical classroom reaction demonstration setup
- Special rubber sealing ring helps contain generated gas for more accurate experimental comparison outcomes
- 65 x 150 mm bottle size supports practical handling for classroom chemistry and supervised lab activities
$52.00 (Ex GST)
LDPE Dropping Bottle, Lab Dropwise Dispensing Bottle with Screw Cap
• LDPE dropping bottles for dispensing small uniform drops, supports controlled addition of liquids in lab and classroom activities
• Capacities listed 15, 30, 60, 125 and 250 mL, select volume to match reagent use and bench workflow
• Screw cap with attached cover helps reduce leakage risk and keeps dropper tip protected between uses
• Material stated low density polyethylene, suitable for lightweight, squeeze dispensing and routine laboratory handling
• Supports consistent reordering, label bottles clearly and use under appropriate supervision in educational settings
From $2.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lead Acetate Indicator Paper Strips, Vial of 100
- Detect hydrogen sulfide in water, specified sensitivity down to 5 ppm for routine screening checks.
- Dip strip a few seconds, greying often begins around 1–3 ppm, darkens with concentration.
- Colour intensity can progress darker up to about 400 ppm, supports quick comparative assessment.
- Can be used as a moist strip for suspected Hâ‚‚S areas, distilled water wetting is sufficient.
- Minimal cross-reactivity stated, thiols, thioketones, mercaptans give negative response for selectivity.
$11.00 (Ex GST)
Lens and Mirror Holders and Lens Paper
- Lens and mirror holders for classroom optics work, supports stable positioning of lenses and mirrors during reflection and refraction demonstrations
- Wooden V groove holders listed in 50 mm and 75 mm sizes, suitable for common circular optics and simple bench setups
- 50 mm wooden holder described with V shaped slot on rectangular base, supports holding 50 mm diameter lenses and mirrors during alignment tasks
- Adjustable plastic holder option listed, supports flexible positioning where different lens sizes or angles are required in basic optical experiments
- Lens paper listed pack of 100 with 15 x 10 cm sheets for cleaning general optical products, supports clearer observation by reducing dust and smears
From $5.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lever and Fulcrum Apparatus, Basic Mechanics and Lever Principle Demonstrator
- Lever and fulcrum apparatus for simple machine demonstrations, shows mechanical advantage and force direction change.
- Fulcrum position change alters lever arm distance, demonstrates moments and turning effect relationships clearly.
- Supports equilibrium experiments, balance conditions and rotational motion concepts using a pivoted rigid bar.
- Useful for force transfer demonstrations, compare load and effort placement along the lever.
- Classroom and laboratory teaching tool for practical understanding of levers, moments and basic mechanics.
$65.00 (Ex GST)
Lever and Fulcrum Set with Weights and Hangers Included 1 m long
- 1 m lever and fulcrum apparatus, metre rule balances at midpoint to demonstrate moments and equilibrium.
- Knife-edge pivot at centre with V-bearing support, consistent fulcrum seating for repeatable balance tests.
- Shows moment law, weight × distance equality on both sides, clear torque comparison along the rule.
- Includes two 50 g slotted weight carriers, hook over rule edge and slide to any marked position.
- Standard slotted masses not supplied, designed to use existing school weights with supplied carriers.
$170.00 (Ex GST)
Liebig Condenser with Interchangeable Joint Socket, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For condensers with B19 ground joints or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Straight inner tube enables efficient condensationÂ
- Interchangeable socket fits standard joint glasswareÂ
- Designed for cooling vapours in distillation setupsÂ
- Common in organic chemistry, teaching, and researchÂ
- Reliable for reflux, purification, and extractionÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $37.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lipid and Fat Test Paper Strips, Pack of 75
- Detects lipids such as fats, oils and waxes, fast classroom screening for hydrophobic residues.
- Supports identification discussions on lipid families including sterols and cholesterol in food samples.
- Connects results to fat-soluble vitamins A, D, E and K for nutrition and biochemistry teaching.
- Commonly used in education alongside food analysis kits for comparative student experiments and reporting.
- Pack of 75 strips suits group work, repeat trials, and consistent outcomes across practical classes.
$67.00 (Ex GST)
Litmus Test Paper Strips, Acid/Base Indicator Type
- Litmus indicator paper strips for quick acid or base checks, colour change only, no pH chart
- Blue litmus options, pack of 200 economy strips and vial of 100 strips, blue-to-red in acid
- Neutral litmus options, vial 100 or pack 200, turns red in acid and blue in alkali
- Red litmus vial 100 & Red pack 200 , red-to-blue change in alkaline solutions, remains unchanged if not a base
- Water-based solution note stated for vial/neutral pack variants, handle strips by ends, 1–2 second dip
From $5.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
LO-ToX Blue Spirit Thermometers, 305 mm White Backed Brannan Range
• 305 mm Brannan U.K. thermometer range with white backed scale format
• LO-ToX blue spirit filling offers a lower hazard mercury alternative
• Available in total immersion and 76 mm immersion configurations
• Temperature spans include -35 to 50°C, -20 to 110°C, and -20 to 150°C
• Fitted with Brannan non roll end cap and suspension ring
From $12.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
LO-ToX Glass Thermometers, 405 mm White Back Laboratory Range
- 405 mm LO-ToX thermometer range with white back scale format
- All four variations are supplied in 76 mm immersion design
- Includes fine graduation options for lower and mid-range measurement
- Higher range option extends to 260°C for broader laboratory use
- Suitable for general purpose laboratory and educational temperature work
From $38.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Long Time Sand Timers, Durable Classroom and Activity Timing Range
- Long time sand timer range with 10, 15, and 30 minute options
- Robust build includes moulded end caps and thick wall surrounds
- Designed for extreme durability in repeated group or individual use
- Suitable for games, event timing, and classroom lesson activities
- Useful for science, mathematics, and general educational timing tasks
From $35.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
- Loudspeakers in strong housings with metal grilles, protects cones during student handling and storage
- 4 mm socket connections on each unit, supports banana plug leads for fast classroom setup
- Extension speaker options: 75 mm or 56 mm diameter, both 8 ohm impedance, reasonable fidelity output
- Wave study option: pair of 150 mm twin cone speakers, 5 W RMS, 4 ohm impedance, broad range response
- Designed for IEC Wave Lab generator use, also general purpose, includes inbuilt current limiting to reduce coil burnout risk
From $63.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Low Range Glass Thermometers, 305 mm Total Immersion Laboratory Range
• Low range thermometer series in 305 mm total immersion format
• Red spirit filling supports routine low temperature laboratory measurement
• Includes -100 to 50°C and -50 to 50°C working range options
• White backed version supplied for the broader low range model
• Suitable for laboratory and educational temperature monitoring
From $65.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Low Wall Porcelain Crucibles With Lid
• Low wall porcelain crucibles with lids, capacity options 15, 25, 30, 40, 45 and 50 mL for controlled heating and ashing tasks
• Product codes listed C10, C11, C12, C12-1, C13 and C14, supports quick ordering and size matching
• Dimensions specified for each capacity, 25 mL 47 x 24 x 27 mm through 50 mL 59 x 28 x 38 mm, 15 mL stated 43 x 19 x 23 mm
• Supplied with lids to help reduce spatter and contamination during heating, suitable for routine laboratory work
• Packing stated for 15 mL option 70 per pack and 540 per carton, supports class sets and laboratory stock control
From $1.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magdeburg Hemispheres, 75 mm Atmospheric Pressure Demonstration Apparatus
- Metal Magdeburg hemispheres, 75 mm diameter, classic atmospheric pressure demonstration apparatus.
- Valve allows sealing and evacuation, supports comparison of separation force with air inside versus reduced pressure.
- Uses two spring scales, measure pull force when separating hemispheres under different internal pressure states.
- Vacuum pump step increases holding force, shows atmospheric pressure effect through larger force readings.
- Laboratory or educational use only, supervise vacuum handling and secure grip during pull-apart demonstration.
$58.00 (Ex GST)
Magnesium Ribbon, 25 g Reel 3 mm Wide Laboratory Demonstration Type
- 25 g reel, approx 14.5 m per roll, 3 mm wide, 0.25 mm thick ribbon.
- Declared composition 99% magnesium, 1% zinc and lead, uniform ribbon for demonstrations.
- Burns with very intense bright white light and high heat, leaves flaky magnesium oxide residue.
- Eye safety critical, UV-blocking goggles recommended, avoid direct viewing for more than seconds, supervised use.
- EUD required, Cat. 2 purchase, store securely, handle as regulated reactive metal ribbon.
$58.00 (Ex GST)
Magnet Teaching and Demonstration Range
- Magnet teaching and demonstration range supports physics lessons on poles, attraction and repulsion, magnetic fields and basic electromagnetism concepts
- 7 piece teaching kit includes bar magnets, U magnet, horseshoe magnet and ring magnet plus compass, magnetic needle and stand and iron filings, supplied in case 247 x 182 x 68 mm
- Neodymium rare earth magnet listed grade N35 with max working temperature 80°C, strong compact format for experiments, handle with care due to pinch risk
- Additional demonstration options include hematite magnetoids pair 60 x 18 mm and large U magnet with keeper 110 x 103 x 50 mm lifting stated 68 kg
- Also listed floating ring magnet stand, U shape magnet 50 mm and permanent magnet wand moulded in plastic, choose item based on lesson focus and supervision requirements
From $6.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Field Demonstrator Kit, Acrylic Cavities with Metal Bars
- Magnetic field demonstrators for classroom visualisation of field behaviour, supports clearer observation than loose filings in many setups
- Acrylic cavity type option listed with iron bars, size stated 200 x 100 mm and interlocking lugs feature to join multiple units into a larger display
- Acrylic cavities with metal bars kit option listed, supports modular teaching demonstrations where multiple cavities can be aligned for wider viewing areas
- Flat form oil filled demonstrator listed 190 x 100 mm, supports smooth visual tracking of magnetic effects in a contained format
- Observation box style demonstrator listed acrylic type, supports safe hands on viewing, select format based on class size, display area needed and bench space
From $14.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Stirrer, Variable Speed Mixing Unit
- Electronic variable speed control approx 150 to 1500 RPM, strong magnet stirs up to glycerine viscosity
- 200 x 180 mm rectangular top plate, alloy, plain, epoxy coated, or PTFE coated options
- Corrosion resistance via epoxy coating or PTFE (Teflon) coating, PTFE also supports easier cleaning
- Stirrer hot plate combos add heat control plus speed control, front panel mains switch and controls
-  Thermostat models adjust 50 to 320°C and maintain set temperature, simmerstat recommended for boiling
From $410.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetism Teaching Accessories
- Magnetism accessories for clearer classroom demonstrations, supports safer and cleaner visualisation of magnetic fields compared with loose filings
- Coloured magnetic line chips listed 100 g with 5 mixed colours per pack, designed to show a three dimensional magnetic field display around magnets
- Chips described as clean easy alternative to iron filings, supports repeated demonstrations with reduced mess and faster classroom reset between groups
- Magnetising box listed for recharging bar magnets without power, supports maintaining magnet performance for repeated teaching use
- Box dimensions stated 210 x 90 x 40 mm with weight 0.5 kg, compact bench accessory, store with magnet kits and use under appropriate supervision
From $65.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manual and Bench Centrifuges with Spare Tube Parts
- Hand operated 4 place centrifuge with table clamp for field work, listed for 10–15 mL tubes, handle clockwise only
- Overall length 280 mm, plastic body with metal side and clamping plates, ring ID 22 mm where plastic tube sits
- Spare 10 mL tube listed 16 mm diameter x 110 mm height, plus spare plastic outer tube option
- High speed option listed 12,000 rpm for 1.5–2.0 mL tubes, supports microtube spinning tasks
- 6,000 rpm options listed for 5 mL tubes or universal 0.5, 1.2, 1.5 and 5 mL tubes, laboratory or education use under supervision
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manual Plastic Vacuum Pump Handheld with Built in Pressure Gauge
- Compact design for portable vacuum creationÂ
- Integrated pressure gauge for accurate readingsÂ
- Ergonomic handheld operation—no power requiredÂ
- Ideal for filtration, degassing, and lab testingÂ
- Durable plastic body resists chemical exposureÂ
- Supplied by LabChoice Australia – Reliable & efficientÂ
- Packaging: Single UnitÂ
$65.00 (Ex GST)
MCE Syringe Filters, Mixed Cellulose Ester Laboratory Filtration Range
• Mixed cellulose ester syringe filters supplied pack of 100, supports routine laboratory filtration and sample clarification tasks
• Pore size options listed 0.45 µm and 0.8 µm, select based on particle load and target clarification level
• Diameter options listed 13 mm and 25 mm, supports different sample volumes and flow preferences in syringe filtration
• Consistent pack quantity 100 supports lab stocking and batch preparation workflows, reduces reordering frequency
• Clear specification by membrane type, pore size and diameter supports correct selection, keep filters sealed until use and handle under appropriate laboratory supervision
From $93.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class A, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
- Class A accuracy enables precise liquid measurementÂ
- Interchangeable stopper allows secure liquid sealingÂ
- Stable round base ensures safety during pouringÂ
- Ideal for titration, reagent prep, and quantitative workÂ
- Used in analytical, educational, and R&D laboratoriesÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $28.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class A, Spout & Break-Resistant Collar, Borosilicate Glass (BORO 3.3)
- Class A tolerance enables precision volume analysisÂ
- Spout provides accurate, spill-free liquid dispensingÂ
- Break-resistant collar increases durability and safetyÂ
- Used for titration, dilution, and reagent measurementÂ
- Trusted in analytical, QC, pharma, and teaching labsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $11.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class B, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
- Class B tolerance suitable for general measurementsÂ
- Interchangeable stopper allows secure closure of contentsÂ
- Round base offers stability on lab benchesÂ
- Ideal for solution prep, dilutions, and transfersÂ
- Used in education, quality control, and R&D labsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $11.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.