Digital Max Min Thermometer, Waterproof, -20 to 50°C
- Digital max/min thermometer for temperature monitoring
- Model listed as YH-NBL16
- Temperature measurement range listed as -20 to 50°C
- Temperature accuracy listed as ±1°C
- Temperature resolution listed as 0.1°C
- Max and min temperature memory function
- Celsius and Fahrenheit conversion by button
- Waterproof design suitable for outdoor placement
- Hook hole allows hanging on windows or walls
- Product size listed as 13.2 × 8 × 3 cm
- Package weight listed as approximately 135 g
- Does not have an auto-off function
AUD 24.90 (Ex GST)
Digital Microwave Transmitter Kit, Reflection Polarisation and Interference Teaching Set
- Digital microwave experiment kit for laboratory and educational use
- Demonstrates microwave emission and reception
- Used to illustrate basic optical characteristics with microwaves
- 10.525 GHz microwave transmitter as listed
- Transmitter can rotate 360° to change transmitting angle
- Microwave receiver can rotate 360° to change receiving angle
- Includes microwave diode probe as listed
- Includes guide rails with metric scales and centre pivot angular scale
- Includes reflector, polariser, absorbers, screens and prism accessories
- Supplied with two 240 V AC to 12 V DC plug packs as listed
- Packed size listed as 71 × 40 × 17.5 cm, 6.8 kg
- Use under appropriate laboratory or educational supervision
AUD 1,085.90 (Ex GST)
Digital Mini Wave Signal Generator, 0.1 Hz to 100 kHz, 1 A Output
- Compact digital signal generator for classroom waveform experiments
- Provides sine, square, triangle and sawtooth waveforms
- Frequency range is stated as 0.1 Hz to 100 kHz
- Crystal-locked design with accuracy stated at approximately 0.01%
- Adjustable output up to 15 V peak-to-peak or 5 V AC RMS
- Output can supply up to 1 A into the load
- Suitable for resonance, audio and oscilloscope demonstrations
AUD 469.50 (Ex GST)
Digital Multimeter, Auto-Ranging, Capacitance & Auto Power Off
- IEC digital multimeter designed for electrical testing, circuit analysis and laboratory use
- Measures AC and DC voltage and current up to 10 A for electrical circuit investigations
- Auto-ranging function automatically selects a suitable measurement range for each function
- Measures resistance up to 200 MΩ and capacitance from nanofarads to 20 µF
- Supports frequency measurement, diode testing and transistor gain (hFE) investigations
- Measures small electrical currents down to 1 µA for sensitive circuit applications
- Large digital LCD with selectable backlight provides clear readings and unit indication
- Automatic power-off function helps conserve the standard 9 V battery during use
- Compact 145 × 75 × 33 mm design includes red and black test leads for electrical testing
AUD 42.50 (Ex GST)
Digital Multimeter, Capacitance & Auto Power Off
- IEC digital multimeter designed for electrical testing, circuit analysis and laboratory use
- Measures AC and DC voltage and current up to 20 A for electrical circuit investigations
- Supports small current measurements down to 1 µA for electronic testing applications
- Measures resistance up to 200 MΩ and capacitance up to 20 µF for laboratory testing
- Includes diode testing, audible continuity checking and transistor gain measurement
- Large digital LCD displays measurement values and selected units for convenient reading
- Automatic power-off function helps conserve the standard 9 V battery during operation
- Compact 170 × 85 × 35 mm construction supports portable electrical measurements
- Supplied with red and black test leads for schools, universities and electronics laboratories
AUD 44.90 (Ex GST)
Digital Newton Meter for Push and Pull Force Measurement
- Digital Newton meter for measuring force values
- Displays force values digitally for easier reading
- Suitable alternative to conventional spring scales
- Supports both push and pull force measurement
- Useful for a wide range of physics experiments
- Suitable for school, university and teaching laboratory use
- Helps students observe force more clearly during practical activities
- Practical for mechanics, motion, friction and force demonstrations
- Confirm measurement range from brochure before ordering
- Digital Newton meter only, accessories are not included unless specified
- Use only within the approved force range
- Use under appropriate laboratory or educational supervision
AUD 122.50 (Ex GST)
Digital Nutating Mixer for Gentle Laboratory Sample Mixing
- Digital nutating mixer for laboratory and educational use
- Combines orbital shaking and rocking motion
- Provides gentle but thorough sample mixing
- 7° tilt angle as listed
- Adjustable speed range from 2 to 80 rpm
- Speed accuracy listed as 1 rpm
- Digital timer range from 0 to 99 h 59 min
- Includes large 307 × 297 mm platform and non-slip mat
- Maximum load listed as 0.8 kg
- Suitable for staining and gentle mixing applications
- Low-voltage power supply supports cold room operation
- Use under appropriate laboratory or educational supervision
AUD 1,328.50 (Ex GST)
Digital Oral Clinical Thermometer with Case and Clip
- Digital oral clinical thermometer for routine temperature checks
- Suitable for oral use as listed
- Standard rigid probe model
- Suitable for all ages, including babies, young children and elderly users
- Temperature range listed as +32°C to +42°C
- 0.1°C divisions for clear digital readings
- Accuracy listed as ±0.1°C between 35.5°C and 42°C
- Accuracy listed as ±0.2°C outside that range
- Supplied with case and clip
- LR41 or equivalent battery included
- Confirm clinical suitability and local requirements before use
- Use according to the supplied thermometer instructions
AUD 24.90 (Ex GST)
Digital Orbital Shaker
- Digital Orbital Shaker for medical diagnostics, haematology, sample preparation, and routine laboratory mixing
- Digital speed control with 30 to 400 RPM range for controlled and repeatable shaking performance
- Large LED display shows set speed and actual speed for easy monitoring during operation
- Timer can be set from 0 to 99 minutes or hours, with 3 memory buttons for repeat settings
- Supplied with fitted nitrile mat for low-speed container holding, with optional racks available for higher speeds
- Slow acceleration helps reduce spillage risk, with extended unattended operation when required
- Supplied by LabChoice Australia for reliable laboratory orbital mixing applications
From AUD 3,080.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Digital pH Pen Meters, 0 to 14 pH
- Digital pH pen meters for water and solution testing
- Measures 0.0 to 14.0 pH
- 0.01 pH resolution with ±0.1 pH accuracy
- Automatic Temperature Compensation supports practical readings
- 1-point calibration with supplied buffer solution pouches
- Compact handheld format for field and bench checks
- Suitable for laboratories, schools and water quality testing
From AUD 34.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Digital Probe Thermometer with Horizontal Display, -50 to 150°C
- Digital probe thermometer with horizontal barrel display
- Temperature range listed as -50 to +150°C
- Celsius and Fahrenheit interchangeable display
- Supplied with 120 mm stainless steel probe
- Probe dimensions listed as 120 × 3.75 mm diameter
- Display divisions listed as 0.1°C
- Product dimensions listed as 152 × 58 × 17 mm
- Product weight listed as 20 g
- Supplied with pocket case and clip
- Suitable for food science, laboratory and general temperature checks
- Keep thermometer head away from direct heat or cold
- Do not use in microwave or conventional oven
AUD 31.50 (Ex GST)
Digital Probe Thermometer with Timer
- Digital handheld probe thermometer with timer function
- Dual displays for temperature and timer readings
- Includes programmable high and low temperature alarm
- Supplied with 1 m cable and 235 mm stainless steel probe
- Maximum and minimum temperature memory function
- Celsius and Fahrenheit interchangeable display
- Data hold function for retaining readings
- 99 hour countdown timer with timer setting memory
- Timer elapsed time display
- Includes battery, hanger, stand and magnetic fixtures
- Wall mount keyhole and flip-out desk stand
- Suitable for laboratory, educational and general temperature monitoring
AUD 119.90 (Ex GST)
Digital Probe Thermometer with Vertical Display, -50 to 150°C
- Digital probe thermometer with vertical barrel display
- Temperature range listed as -50 to +150°C
- Celsius and Fahrenheit interchangeable display
- Supplied with 120 mm stainless steel probe
- Commonly used as a digital meat thermometer
- Supplied with pocket case and clip
- Batteries included
- ON/OFF button for simple operation
- C/F button changes between Celsius and Fahrenheit
- Suitable for food science, laboratory and general temperature checks
- Keep thermometer head away from direct heat or cold
- Do not use in microwave or conventional oven
AUD 31.50 (Ex GST)
Digital Regulator Module, 1.2 to 20 V DC, 1 A
- Digital regulator module for laboratory and education use
- Converts compatible AC or unfiltered DC input into smooth regulated DC output
- Adjustable output listed as 1.2 to 20 V DC
- Output current listed as 1 A
- Suitable for electronic studies and low-voltage DC experiments
- Digital display monitors output voltage
- Input and output via 4 mm sockets
- Useful with compatible 12 V AC/DC classroom power sources
- Helps provide smoother DC for circuits that require regulated supply
- Use under appropriate teacher or laboratory supervision
AUD 210.90 (Ex GST)
Digital Salinity Refractometer, 0 to 28%, RI 1.3330 to 1.3900
- Digital salinity refractometer for laboratory and educational use
- Model listed as DR-201 sodium chloride refractometer
- Salinity range listed as 0.0 to 28.0%
- Salinity scale also listed as 0 to 280‰
- Specific gravity range listed as 1.000 to 1.217
- Refractive index range listed as 1.3330 to 1.3900 nD
- Digital display supports quick salinity reading
- Automatic temperature compensation listed from 0 to 40°C
- Suitable for sodium chloride solution and compatible salinity testing
- Supplied with carrying case, mini screwdriver and manual
AUD 549.50 (Ex GST)
Digital Shaking Waterbath
- Compact and large formats support low-volume to higher-capacity shaking
- Digital PID temperature control supports stable heated waterbath operation
- Compact model provides 8 L capacity with 20 to 130 strokes per minute
- Large model provides 20 L capacity with 20 to 200 strokes per minute
- Low water level cutout with reset supports safer waterbath operation
- Optional lids and RR20 rack support container holding and bath control
From AUD 3,057.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Digital Stopwatch, 1/100 Split and Lap Time
- Digital stopwatch for laboratory, classroom and field timing
- Chronograph function measures 1/100 split and lap time
- Measures up to 24 hours
- Includes time and calendar functions
- Presettable pacer function
- LCD panel with lanyard
- Water and shock resistant design
- Battery listed as AG13 × 1 piece
- Display number size listed as 4 × 12 mm
- Product size listed as 82.5 × 62.5 × 22.5 mm
- Suitable for science, sport, classroom and general timing workflows
- Contains coin/button battery and must be kept away from children
AUD 13.90 (Ex GST)
Digital Timers, Jumbo Display Countdown and Stopwatch Range
- Digital timer range with count up and count down timing formats
- Jumbo display options available in 1 channel and 4 channel models
- Clip and stand version supports bench, clip, and magnetic placement
- Countdown format covers up to 99 minutes and 59 seconds
- Suitable for timed experiments, classroom use, and routine monitoring
From AUD 32.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Digital Waterproof Max Min Probe Thermometer, -50 to 200°C
- Digital waterproof probe thermometer for temperature testing
- Temperature range listed as -50 to 200°C / -58 to 392°F
- Max/min memory function for recorded temperature extremes
- Hold function for retaining readings on the display
- LCD display with 0.1°C divisions
- Accuracy listed as ±1°C / 1.8°F
- IP65 rating for protection against spills and splashes
- Stainless steel probe made from 304 stainless steel
- Probe sensing tube listed as Φ3.8 × 127 mm
- Overall dimensions listed as 20 × 204 mm
- Supplied complete with pocket case and clip
- Auto shutdown after 40 minutes without operation
AUD 29.50 (Ex GST)
Digital Wine Refractometer, 0 to 45% Brix, 0 to 22% VOL
- Digital wine refractometer for laboratory and educational use
- Model listed as DR-401
- Brix range listed as 0 to 45%
- VOL scale listed as 0 to 22.0%
- Oe scale listed as 0 to 140
- KMW scale listed as 0 to 25
- Automatic temperature compensation listed from 0 to 40°C
- Digital display supports quick and clear readings
- Suitable for wine, grape juice and fermentation-related teaching workflows
- Supplied with protective carrying case, mini screwdriver and manual
AUD 549.50 (Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
- Digital Xenon stroboscopes for motion and speed observation
- Frequency range is adjustable from 1.0 Hz to 300 Hz
- Digital display selectable in Hz or RPM
- Large 150 mm diameter reflector provides bright illumination
- Pivoting carry handle can also be used as a tilt support
- Flash can be externally triggered or synchronised with mains frequency
- XEH model supports connection to compatible remote flash accessories
From AUD 656.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Dimroth Coil Condenser BORO 3.3 Borosilicate Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Dual-surface cooling design provides superior condensation efficiency
- Ideal for high-vapour-load reflux, distillation, and solvent purification
- BORO 3.3 glass construction ensures excellent thermal and chemical resistance
- Works effectively with lower water flow rates for energy-efficient cooling
- Precision-ground interchangeable joints fit standard laboratory glassware
- Manufactured to ISO 3585 and ASTM E438 Type I, Class A glass standards
From AUD 70.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Dimroth Condenser For Soxhlet Extraction and Apparatus BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Dual-surface cooling design provides superior condensation efficiency
- Ideal for high-vapour-load reflux, distillation, and solvent purification
- BORO 3.3 glass construction ensures excellent thermal and chemical resistance
- Works effectively with lower water flow rates for energy-efficient cooling
- Precision-ground interchangeable joints fit standard laboratory glassware
- Manufactured to ISO 3585 and ASTM E438 Type I, Class A glass standards
From AUD 129.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Dish Attachment Range with Non-Slip Mat for Shaker
- Dish attachment accessory range for compatible laboratory shakers
- Suitable for compatible laboratory shaker models
- Supplied with non-slip mat surface for practical dish placement
- Standard dish attachment size listed as W24 × D21.5 cm
- Dish platform supplied with fixed string support
- Larger dish platform size listed as 34 × 34 cm
- Helps users compare standard and larger dish platform options
- Confirm shaker compatibility, platform fit, dish size and sample stability before use
Dish Platform with Non-Slip Mat and Fixed String for Dish Support
- Dish platform accessory for compatible laboratory shakers
- Designed for shaker compatibility as specified by the manufacturer
- Designed with a non-slip mat surface for stable dish placement
- Fixed string support helps hold dishes during compatible platform use
- Supplied fixed string detail listed as 8 pcs
- Platform dimension listed as W30 × D28.5 cm
- Helps customers identify the correct dish platform accessory before ordering
- Confirm shaker compatibility, dish size, sample stability and platform fit before use
Displacement and Spouting Vessels, Liquid Behaviour Demonstration Range
- Includes displacement and spouting vessel formats for liquid behaviour demonstrations
- Metal vessel supports density, specific gravity, and Archimedes' principle work
- Spouted design assists volumetric displacement experiments with liquid overflow
- Plastic Pascal’s Vase demonstrates increasing water pressure with depth
- Suitable for supervised laboratory and educational physics practical use
From AUD 10.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Disposable Plastic Syringes, without Needle Pack of 100 Pcs
- Disposable plastic syringes for laboratory and educational use
- Supplied without needles as listed
- All-purpose syringe format as listed
- Luer Slip connection as listed
- Pack size listed as 100 pieces for each option
- Available capacities include 1 mL, 2 mL, 3 mL, 5 mL, 10 mL, 20 mL and 50 mL
- 10 mL option listed with concentric nozzle
- 10 mL nozzle OD listed as 4 mm
- 20 mL and 50 mL options listed with eccentric tip
- 20 mL option includes 1 mL graduations as listed
- Sterility status is not specified
- Use under appropriate laboratory or educational supervision
From AUD 14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Disposable Sterile Scalpels, Carbon Steel Blade, Pack of 10
- Disposable scalpel range for laboratory and educational use
- Available with #10 and #22 carbon steel blade options
- Plastic handle format
- Supplied as pack of 10 pcs
- Each scalpel is individually foil sealed
- Sterile packaging listed for each scalpel
- Suitable for dissection, specimen preparation and controlled cutting tasks
- Useful for biology teaching and laboratory preparation workflows
- Single-use format helps reduce cleaning requirements
- Use only under appropriate laboratory or teacher supervision
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Dissectible Transformer Complete Kit with Spot Welder
- Classic dissectible transformer for teaching transformer principles
- Complete kit supplied with spot welder and induction accessories
- Large iron core with 35 × 35 mm section
- “I” core section clamps to the “U” core to close the magnetic circuit
- Standard set includes mains operated primary coil with on/off switch
- Removable mains cable included as listed
- Includes low voltage, heavy current tapped secondary coil
- Plastic foot helps protect the work bench
- Includes rugged spot welder for transformer demonstrations
- Includes heavy copper ring for induction heating demonstrations
- Thompson’s ring included as listed
- Use only under appropriate laboratory or educational supervision
AUD 1,043.50 (Ex GST)
Dissecting Instrument Sets, Walleted Laboratory and Classroom Kits
- Laboratory dissecting sets designed for biology education, specimen preparation and anatomical investigations
- Available in three configurations: 4, 7 and 10 instruments
- Supplied in a wallet for convenient instrument storage and organisation
- Includes essential dissecting tools such as forceps, scissors and scalpel handles
- 4-instrument set includes splinter forceps, scalpel handle with blade, dissecting scissors and artery forceps
- 7-instrument set includes stainless steel dissecting tools with a disposable carbon steel scalpel blade
- 10-instrument set includes forceps, scissors, ruler, scalpel handle, transfer pipette, dissecting needles/probes and dissecting pins
- Different instrument configurations accommodate various laboratory dissection requirements
- Suitable for handling, separating and examining biological specimens
- Designed for practical biology lessons and supervised dissection activities
- Ideal for secondary schools, universities, research laboratories and educational science facilities
From AUD 29.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Dissecting Needle, Aluminium Handle, Straight Fine Point
- Straight dissecting needle for laboratory and classroom use
- Fine point design for precise specimen handling
- Aluminium handle for lightweight routine use
- Suitable for biology, dissection and microscopy preparation workflows
- Useful for teasing, positioning and separating compatible specimens
- Practical tool for school and university teaching laboratories
- Supports controlled handling during approved dissection activities
- Suitable for use with dissection trays and compatible specimens
- Sharp point should be handled carefully
- Use under appropriate laboratory or educational supervision
AUD 2.50 (Ex GST)
Dissecting Needles with Wooden Handle, Bent and Straight
- Dissecting needle range for biology and classroom use
- Wooden handle for practical manual control
- Available in bent and straight fine point options
- Bent needle supports angled specimen handling
- Straight fine needle supports precise probing and teasing
- Suitable for dissection, specimen positioning and microscopy preparation
- Useful for school and university teaching laboratories
- Supports approved biology and anatomy practical workflows
- Sharp point should be handled carefully
- Use under appropriate laboratory or educational supervision
From AUD 1.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.