Heat Resistant Laboratory Bench Mats
- Heat resistant bench mats for laboratory work, supports protecting benchtops from hot apparatus during heating and practical demonstrations
- Material stated cement sheet and asbestos free, provides a stable heat resistant surface for routine lab setups
- Two sizes listed 100 x 100 mm and 300 x 300 mm, choose size based on footprint of hot plate, tripod, burner area or small equipment placement
- Thickness stated 6 mm for both sizes, supports flat placement and consistent clearance above benchtop surfaces
- Used as laboratory mat, position on a stable surface and monitor heating operations under appropriate supervision, allow to cool before moving or storing
From $6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Heated Water Bath with LED Display and Automatic Low-Water Cut-Off, 12 L to 32 L Capacity
- Available in 12 L to 32 L capacities for different laboratory workloads
- Temperature range from room temperature +5°C to 100°C
- 1500 W heating power supports efficient water heating
- LED display provides clear temperature monitoring during operation
- Automatic water level sensor detects low-water conditions
- Low-water cut-off disconnects heating power to help prevent boil-dry damage
From $1,295.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hematocrit Centrifuge with 24-Place Capillary Tube Hematocrit Rotor Kit, Lid and Reading Disc, up to 12,000 rpm
- Supplied with DAC24 rotor kit for 24 compatible capillary tubes
- Adjustable speed range from 200 to 12,000 rpm in precise 10 rpm increments
- Maximum relative centrifugal force of 13,680 × g supports high-speed capillary sample separation
- LCD display and intuitive menu support clear control of speed and run time
- Pulse and short-time run functions support fast, convenient quick-spin operation
- Maintenance-free brushless DC motor supports reliable routine laboratory use
- Door interlock, overspeed detection, over-temperature monitoring, internal diagnosis and rotor identification support controlled operation
Hematocrit High Speed Centrifuge with 24-Place Capillary Tube Hematocrit Rotor Kit, Lid and Reading Disc, up to 12,000 rpm
- Supplied with DAC24 hematocrit rotor kit for 24 compatible capillary tubes
- Includes rotor lid and reading disc for hematocrit and packed cell volume workflows
- Adjustable speed range from 500 to 12,000 rpm in 100 rpm increments
- Maximum relative centrifugal force of 13,680 × g supports high-speed capillary separation
- LCD display supports precise control of speed and operating time
- Run time from 10 seconds to 99 minutes, with continuous operation available
- Door interlock, speed/RCF switch, short-time run and sound-alert functions support controlled use
Special Price
Hempel Distillation Column Plain BORO 3.3 Borosilicate Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Plain Hempel column designed for smooth vapour rise and consistent separation
- Ideal for general distillation, solvent purification and teaching labs
- High clarity BORO 3.3 glass for thermal stability and chemical resistance
- Compatible with standard ground glass joints for easy system integration
- Reliable performance for research, education and routine lab workflows
- Made from LabChoice BORO 3.3 glass, high quality
From $24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hexagonal Cast Iron Weights with Ring, Durable Laboratory Weight Range
- Hexagonal cast iron weight range with ring for practical laboratory use
- Weight values available from 50 g through to 5000 g
- Painted cast iron construction supports durable repeated handling
- Ring format suits demonstration, hanging, and general experiment setup
- Intended for laboratory or educational setting use only
From $6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
High-Sensitivity Digital Electrometer for Low-Charge Measurement
- Digital electrometer for very small voltage, current, charge measurements, high impedance input for electrostatics.
- Voltage ranges 0–2, −20, −200, −2,000 mV, supports low-level potential measurements without loading.
- Current ranges 0–2, −20, −200, −2,000 nA, measures nanoamp currents through high resistance paths.
- Charge range 0–2,000 nC, suitable for quantifying electrostatic charge and capacitor charging behaviour.
- Used for electrostatic rods, insulator currents, capacitor tests, and Aepinus capacitor measurements in labs.
$516.50 (Ex GST)
High-Speed Microcentrifuge with Multi Rotor, up to 15,000 rpm
- Adjustable speed range from 200 to 15,000 rpm delivers up to 21,380 × g
- Five rotor options accommodate 0.2, 0.5, 1.5, 2 and 5 mL tubes plus PCR 8-tube strips
- Timed operation from 30 seconds to 99 minutes, with HOLD mode for continuous running
- Nine adjustable acceleration and deceleration levels support different sample-handling requirements
- LCD displays operating parameters, with selectable speed and RCF monitoring
- Brushless DC motor operates at a specified noise level of ≤64 dB
- Motorised dual door lock, overspeed detection and internal diagnostics support safer operation
Hipipette Adjustable 12-Channel Manual Pipette, Fully Autoclavable and Colour-Coded
- Suitable for compatible universal pipette tips, supporting convenient tip selection for routine laboratory use
- Twelve-channel configuration supports simultaneous liquid transfer across compatible 96-well microplate rows
- Adjustable volume range from 0.5 to 10 µL with fine 0.01 µL increments
- Volume-lock mechanism helps prevent unintended volume changes during pipetting
- Elastic tip-loading system supports secure tip attachment and consistent sealing across all channels
- Lightweight ergonomic design and low plunger force help reduce hand strain during repetitive pipetting
- Fully autoclavable and UV-resistant construction supports laboratory contamination-control procedures
- Colour-coded design assists volume-range identification and organised pipette management
Hipipette Adjustable 8-Channel Manual Pipette, Fully Autoclavable and Colour-Coded
- Suitable for use with compatible universal pipette tips for convenient laboratory tip selection
- Eight-channel configuration supports simultaneous liquid transfer across compatible 96-well microplate columns
- Adjustable volume range from 0.5 to 10 µL with fine 0.01 µL increments
- Four-digit volume display provides clear and precise visibility of the selected volume
- Volume-lock mechanism helps prevent accidental volume changes during pipetting
- 360° rotating head supports flexible positioning during microplate workflows
- Fully autoclavable and UV-disinfectable construction supports contamination-control procedures
Hipipette Fully Autoclavable Colour-Coded Single-Channel Mechanical Pipette
- Adjustable volume range from 100 to 1000 µL for routine medium-volume liquid handling
- Fine 1 µL increment supports controlled volume selection across the working range
- Single-channel configuration suits individual sample, reagent, buffer and standard transfers
- Fully autoclavable without disassembly and suitable for UV sterilisation procedures
- Ultra-light body weighing less than 100 g helps reduce fatigue during repetitive pipetting
- One-button volume lock helps prevent accidental volume changes during liquid transfer
- Colour-coded scale supports quick volume-range identification and organised pipette management
From $233.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hodson Light Box and Optical Kits
- Hodson light box supports basic optics and colour blending, designed for rough student handling
- Unique 12V 30W QI lamp socket, allows one box to plug into another
- Stackable moulded banana plug leads, lens adjuster fixed, mirrors efficient and virtually unbreakable
- Includes three slit formers for multiple rays, heat resistant sets of eight colour filters and plates
- Options: full kit, light box only with slit formers, or kit with mini 240/12V transformer
From $89.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hodson Optical Bench and Lens Kit
- 1.5 m optical bench with adjustable metric scale, supports reflection, refraction, lens and image formation experiments
- Comprehensive kit includes convex and concave lenses, targets, white screen and sliding component supports
- Includes large prism and prism table plus photographic slides for multiple classroom optical demonstrations
- Choice of package: complete system with standard Hodson light box as light source or bench kit only
- Low cost, versatile optics teaching setup suited to repeating demonstrations with consistent component positioning
From $247.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
• Hoffman screw tubing clips seal flexible tubing by pinching sides together, blocks air or gas flow quickly
• Max opening options listed 18, 20, 25, 30 and 40 mm, select size to match tubing and required closure range
• Nickel plated brass stated, also described as nickel plated bronze clamp, projecting plate helps protect tubing from screw damage
• Hinged side bar allows fitting and removal without access to tubing ends, supports rapid setup changes in lab workflows
• Adjustable screw provides controlled sealing pressure, for laboratory or educational settings only under appropriate supervision
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hofmann Voltameter and Spare Electrode Pairs, Laboratory Electrolysis Range
- Includes complete Hofmann voltameter and separate spare electrode pair options
- All plastic model includes one pair of platinum electrodes
- Carbon spare pair suits glass type Hofmann voltameter only
- Platinum spare pair is designed to fit product GE5600-01 Hofmann
- Suitable for laboratory or educational use with stated maintenance guidance
From $18.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hollow Stoppers, High Quality Borosilicate Glass (BORO 3.3), Heavy Quality
- Lightweight hollow design reduces joint stress
- Precision-ground for airtight, leak-resistant sealing
- Durable and reusable for long-term use
- Ideal for flasks, condensers, and jointed glassware
- Used in chemistry, pharmaceutical, and academic labs
- Made from LabChoice BORO 3.3 glass – High quality
From $2.10 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Holographic Diffraction Gratings
- Holographic diffraction grating film produces clear, bright diffraction patterns for optics demonstrations
- Mounted as a 35 mm slide format, convenient for handling and alignment in classroom experiments
- Two grating densities available, 500 lines/mm and 1000 lines/mm, to compare diffraction spacing effects
- Supplier notes on film protection vary by model code, including versions with no film protection
- 1000 lines/mm range includes a model with film between very thin glass sheets as specified
From $12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hooke’s Law Apparatus Complete with Spring Scale and Stand
• Complete Hooke’s law setup, spring scale and stand, MS0198-01. • 15 cm adjustable mm scale, helps reduce parallax reading error. • Scale on sturdy 30 cm support rod, stable bench positioning. • Hook mounted to rod, supports coiled spring, hanger, indicator. • Wooden base, repeatable extension measurements for classroom practicals.
$43.90 (Ex GST)
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
- Tension spring sets for Hooke’s law experiments, supports mass versus extension measurements in mechanics teaching
- Two set types: non proportional set of five mixed springs, or proportional set of six springs designed to be relative
- Proportional set uses matched combinations of spring diameter, length and wire diameter, all springs have eye ends
- Non proportional set provides varied spring constants through mixed spring diameter, length and wire diameter specifications
- Spring dimensions and wire diameters are specified for each spring, supports controlled selection and repeatable class experiments
From $28.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Horizontal Plastic Clamp for Digital Vortex Mixer, 12 holes×15mL Test Tube (Circular plate)
- Horizontal plastic clamp for compatible digital vortex mixer use
- Circular plate design with 12 holes for 15 mL tubes
- Helps hold test tubes securely during vortex mixing
- Suitable for routine laboratory sample preparation workflows
- Practical accessory for organised multi-tube mixing
- Supplied by LabChoice Australia for compatible mixer use
$44.50 (Ex GST)
Horizontal Plastic Clamp for Digital Vortex Mixer, 24 holes×1.5mL Test Tube (Circular plate)
- Horizontal plastic clamp for compatible digital vortex mixer use
- Circular plate design with 24 holes for 1.5 mL tubes
- Helps hold tubes in position during vortex mixing
- Suitable for routine laboratory sample preparation workflows
- Practical accessory for organised multi-tube mixing
- Supplied by LabChoice Australia for compatible mixer use
$44.50 (Ex GST)
Horizontal Plastic Clamp for Digital Vortex Mixer, 6 holes×50mL Test Tube (Circular plate)
- Horizontal plastic clamp for compatible digital vortex mixer use
- Circular plate design with 6 holes for 50 mL tubes
- Helps hold larger test tubes securely during vortex mixing
- Suitable for routine laboratory sample preparation workflows
- Practical accessory for organised multi-tube mixing
- Supplied by LabChoice Australia for compatible mixer use
$44.50 (Ex GST)
Hose Connection Adapter Bent BORO 3.3 Glass Laboratory Grade
- Connects and extends glassware joints for flexible lab setups
- Ideal for distillation, extraction, and reflux applications
- Provides airtight, precise connections between apparatus
- Heat and chemical resistant for demanding lab use
- Crafted from premium BORO 3.3 borosilicate glass
- High-quality product by LabChoice Australia
From $23.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hot/Cold Thermopile on Heat Sink with Socket Terminals
- Peltier thermoelectric cell, demonstrates heating and cooling when DC is applied across multiple junctions.
- Flat plate construction, one face heats, opposite face cools, temperature difference clearly observable.
- Mounted on heat sink, supports stable demonstration and improves heat spreading on hot side.
- Two 4 mm sockets for easy DC connection with standard lab leads, polarity controls hot/cold side.
- Cold face can form ice under suitable conditions, strong visual for classroom thermoelectric lessons.
$123.50 (Ex GST)
Human Anatomy Teaching Models, Brain and Nervous System Range
• Human anatomy teaching models for brain and nervous system learning, supports classroom demonstration and lab based anatomy instruction • 8 piece brain model listed shows cerebral hemisphere, brain stem and cerebellum plus arterial supply including vertebral and internal carotid arteries • Arterial supply detail listed for cerebrum and cerebellum, supports teaching blood supply pathways and component relationships • Material stated washable high quality PVC on base with size stated 18 x 14 x 14 cm, supports repeated student handling and clear inspection • Other options listed include brain section on stand, head with neck showing brain and nervous system board model, select format to match lesson plan and display needs under appropriate supervision
From $84.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Circulatory Teaching Models, Heart and Circulation Demonstration Range
- Human circulatory teaching models for anatomy learning, supports classroom demonstrations of heart structure and circulation concepts
- Large heart model listed 4 times enlarged and dissectible into 3 parts, supports clear viewing of internal structures and hands on inspection
- Shows heart external features, internal structures and relation with large blood vessels, supports explaining systemic and pulmonary circulation routes
- Material stated PVC plastic with size stated 25 x 23 x 23 cm on base, supports durable bench display and repeated student handling
- Second option listed human circulatory system model for broader system level teaching, select model type to suit lesson focus and use under appropriate supervision
From $114.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Disgestive System Teaching Models for Anatomy
- Human digestive system teaching models for anatomy learning, supports clear demonstration of organ pathways and internal features in class and lab
- Life size digestive tract model listed shows mouth cavity to rectum with multiple organs opened or dissected for interior viewing and structure identification
- Key features listed include liver with gall bladder, dissected pancreas, opened stomach, opened duodenum, caecum, intestine section and rectum plus removable transverse colon
- Additional head relief model listed showing mouth anatomy with salivary glands, supports teaching oral anatomy alongside digestive tract pathways
- Material stated high quality PVC with dimensions stated 90 x 30 x 13 cm and weight approx 1900 g, plus separate 2 part stomach model on stand option, select to match lesson needs under appropriate supervision
From $99.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Reproductive System teaching models
- Human reproductive system teaching models for anatomy education, supports classroom and lab demonstration of reproductive structure and development concepts
- Male reproductive system model option supports guided teaching of male anatomy, useful for structure identification and introductory reproductive science lessons
- Female reproductive organs model option supplied on stand, supports stable bench display and clear viewing during group instruction and revision activities
- Pregnancy series model option supports teaching foetal development concepts, useful for staged learning discussions and visual explanation in biology classes
- Designed for laboratory or educational settings only, use under appropriate supervision and store models carefully to protect detail and stand components
From $207.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Sense Organs Teaching Models For Classroom
- Human anatomy teaching models for classroom and lab use, covers oral care, ear construction, skin layers and eye anatomy in one selection
- Teeth care model supplied with brush and size stated 200 x 150 x 120 mm, supports hands-on oral hygiene demonstration
- Large ear model stated 5 parts with steel pin location system, size stated 330 x 150 x 210 mm and weight 1.4 kg for robust classroom handling
- Skin section block model stated 70 times enlarged in high quality PVC on base, shows skin layers, hair, glands, nerve endings, blood vessels and adipose, dims 22 x 21 x 11.5 cm
- Eye options include eyeball in orbit model 190 mm high x 280 mm long and 1.3 kg, plus 6 times enlarged 6 part eye model on stand 140 x 140 x 260 mm and 0.7 kg for detailed inspection
From $83.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Skull Model, Anatomy Teaching Type
- Skeletal anatomy teaching models for classrooms and labs, covers full body skeleton options plus focused bone models for detailed study
- Full size skeleton option listed with stand and castors, size stated 120 x 47 x 30 cm and weight stated 20 kg for stable floor display and demonstrations
- Small skeleton option listed 850 mm height and 3 kg weight, compact format for bench or storage friendly anatomy teaching
- Hand bones model stated full size articulated PVC with radius and ulna on base, moveable at all joints and size stated 11 x 11 x 2 cm for joint motion study
- Life size foot model listed with ligaments plus 2 part plastic skull model, supports focused lessons on ligament structure and skull anatomy under appropriate supervision
From $54.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Human Torso Anatomy Models For Teaching
- Human torso anatomy models for teaching organ identification and body systems, suitable for classroom and laboratory demonstrations under supervision
- 24 part torso model stated 850 mm high with bright accurate colouring, includes removable organs, exposed spine and removable vertebra and spinal cord segments
- Interchangeable male and female genitalia stated with female breast plate, female organs include fetus in womb for reproductive anatomy demonstration
- Additional torso options listed include half life size plastic torso and a sexless 85 cm torso stated 17 parts, supports different class sizes and display needs
- Packed sizes and weights stated for handling and storage planning, 24 part model packed 91 x 44 x 35 cm at 11 kg and sexless model packed 92 x 43 x 29 cm at 12 kg
From $224.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Humidity Measurement Instruments For Laboratory
- Humidity measurement options include hair hygrometer dial, wet and dry bulb psychrometer styles and digital indoor outdoor thermometer hygrometer for flexible monitoring
- Hair hygrometer listed 0–100% RH with 1% divisions and ±4% RH accuracy, lightweight 12 g with stated 65 mm diameter body
- Mason’s wet and dry thermometer hygrometer explains RH calculation from wet bulb cooling versus dry bulb reading, supports teaching of evaporation and humidity concepts
- Whirling hygrometer includes slide rule calculator for %RH, LO-tox filled glass tubes, ABS casing, ranges stated -5 to +50°C with 0.5 divisions and ±1°C accuracy
- Digital indoor outdoor unit lists Brannan 13/420/3 with probe, max min memory, indoor RH 20–99%, temperature ranges and CE and ROHS/WEEE approvals, batteries included
From $12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hybridisation Oven
- Holds up to 18 bottles, 50 mm diameter x 300 mm long, in compact oven body
- Microprocessor mixer control with tachometer for controlled carousel motion
- Motion interrupt cutout and over-temperature cutout listed as safety features
- Fan-assisted blower and spiral wound element provide the listed heater setup
- Control range from 28°C to 99.9°C with ±0.2°C control stability listed
- Timer supports 0 to 99 minutes or 0 to 99 hours with 3 preset settings
$6,274.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.