Parts & Accessories
Laboratory parts and accessories include essential components for maintaining and expanding scientific equipment.Designed for compatibility and durability, these items support smooth laboratory operations.Australian laboratories benefit from reliable replacement parts and accessories for ongoing efficiency.
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
- 300 mm laboratory connection leads for compatible 2 mm socket systems
- Fitted with 2 mm banana plugs on both ends
- Moulded stackable plug design supports multi-connection circuit setups
- Suitable for compact electronics kits and teaching circuit boards
- Colour options support polarity marking and circuit identification
- Short 300 mm length helps reduce wire slack on small trainer panels
- Available in black, blue, green, red and yellow colours
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
- 300 mm laboratory leads for compatible 4 mm banana socket systems
- Fitted with 4 mm moulded stackable banana plugs at both ends
- Stackable ends support plug-through and multi-connection circuit setups
- Colour options support polarity marking and circuit identification
- Suitable for standard laboratory and teaching electrical circuits
- Short 300 mm length helps keep bench wiring tidy and organised
- Available in black, blue, green, red and yellow colours
From $8.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Pucks & Pivot Pin, Lab Accessory Pack
- Air table puck components and accessories for low friction motion and collision experiments, supports classroom mechanics demonstrations
- Complete puck options include large puck with weights, small puck with weights, or small puck with magnet as listed
- Non-elastic collision setup supported by hook and claw Velcro band pairs for large or small pucks
- Joining hardware includes strip with end holes for puck pins and centre hole for pivot pin, pivot pin itself not included
- Additional parts include centre pivot pin that screws into table, lattice joining springs, circular magnet for small pucks, and brass weight sets for large or small pucks
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table, Dynamics and Kinematics Model
- Air table parts for low friction dynamics and collision experiments
- Supports classroom demonstrations using an air cushion to reduce friction
- Bronze bumper wires are available for long side and short side setups
- Bronze spring holds bumper wires in place during suitable table use
- Hollow centre pin is listed for cord-based air table applications
- Complete operating kit is supplied without table and adjustment feet
- Suitable for supervised physics laboratory and educational use
From $4.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Attachment Screws, Accessory
- Air track attachment screws and square nuts for accessory clamping
- Supports repeatable setup of compatible air track experiment hardware
- Grooved stem screw supports clamping and cord tying applications
- Plain flat top screw supports general attachment clamping
- Square nuts are designed to fit both grooved and flat top screws
- Square nut options include aluminium and glass-filled nylon
- Suitable for supervised laboratory and educational air track use
From $2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track End Plug for Track Tube
- End plug for later-model air track tube, seals non-active end air leaks.
- Supports stable airflow when using a single inlet by blocking unused end escape.
- Designed to fit later-model tube ends, simple to install during setup changes.
- Helps keep air directed to the working section of track for reliable glider lift.
- Spare plug for maintenance, replaces missing end seal on later-model air tubes.
$5.50 (Ex GST)
Air Track Foot, Laboratory Track Support Unit
- Replacement foot component range for compatible later model air tracks
- Moulded plastic foot supports vertical or horizontal track setup use
- Shortened plastic foot supports spark track and paper track arrangements
- Attachment screw and aluminium square nut support secure foot fixing
- Metal brace reinforces double lateral support foot assemblies
- Blue height adjusting screw supports height and lateral position adjustment
- Blue lock nut helps secure the selected adjustment setting
From $1.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Glider Attachments, Inelastic Collision Accessory Set
- Air track glider accessories for specialised motion experiments, provides attachment options beyond standard glider runs
- Pendulum attachment listed for pendulum style investigations on the air track platform
- Vertical projectile attachment listed for vertical motion experiments using an air track glider setup
- Jet propulsion attachment specified as balloon air jet driven, supports action reaction demonstrations
- Constant force and soft collision attachments listed for controlled force input and collision behaviour trials
From $78.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Glider Weights, Collision Experiment Mass Set
- Brass glider weight range for compatible air track experiments
- Supports controlled mass changes for acceleration and collision studies
- Slotted weight set fits compatible air track glider weight blocks
- Slotted set includes 4 × 50 g, 4 × 20 g and 4 × 10 g weights
- Old style brass block weights clamp inside the glider spine
- Legacy block weight options include 50 g and 100 g sizes
- Users should confirm glider style before selecting weight format
From $11.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Gliders for Low Friction Motion
- Air track gliders for low-friction linear motion experiments
- Suitable for motion, collision and momentum demonstrations
- Available in 200 mm and 100 mm standard lengths
- 200 mm gliders have a stated weight of 200 g
- 100 mm gliders have a stated weight of 100 g
- Each glider is fitted with weight carrier blocks
- Available in black or gold finishes for easy experiment identification
From $32.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Installation & User Manual
- Air track documentation and launcher accessory range for teaching systems
- Supports setup, assembly and operation of compatible air track apparatus
- Manuals are available for 2.0 m and 2.5 m air track versions
- Correct manual selection helps match the installed track length
- Manual trip launcher is listed as a simple air track launching accessory
- Useful for staff handover, maintenance records and experiment preparation
- Suitable for supervised physics laboratory and educational air track use
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Non-Elastic Velcro Buffer Pair
- Non-elastic buffer pair for compatible air track gliders
- Velcro type design supports non-elastic collision demonstrations
- Fits to the end of compatible air track gliders
- Suitable for momentum and collision experiments in physics teaching
- Fits both old and new style air track gliders as specified
- Supplied as a pair for paired glider collision setups
- Designed for supervised laboratory and educational air track use
$12.50 (Ex GST)
Air Track Over-Track Photogate with Leg Supports
- General purpose photogate supplied with special air track mounting legs
- Designed to fit directly over compatible newer series air track tubes
- Spring extension legs slide into receptacles on each side of the gate
- Supports timing experiments in low-friction air track motion studies
- Useful for velocity, acceleration and collision timing demonstrations
- Cables and plugs are not supplied and must be selected separately
- Suitable for supervised physics laboratory and educational use
$170.50 (Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
- Set of four moulded plastic air track inclination blocks for controlled, repeatable track tilt adjustment.
- Block heights 3 mm, 6 mm, 12 mm, 20 mm, stepped options for different incline settings.
- Raise one end of track to set slope, supports consistent acceleration and motion comparison runs.
- Useful for glider incline experiments, repeatable geometry between classes, reduces setup variation.
- Simple durable accessories for air tracks, quick to swap height blocks during teaching practicals.
$8.90 (Ex GST)
Air Track Replacement Parts and Accessories
- Air track replacement parts and accessories for compatible systems
- Supports maintenance of motion, timing and spark recording setups
- Triangular air inlet end cap fits later model air track tubes only
- Sub base adjustment stud supports air tube straightness adjustment
- Fibreglass tape measure is 3 m long and 16 mm wide
- Glider accessories include spark pens, Alnico magnet and buffer spring
- Compatibility should be confirmed before selecting replacement parts
From $6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
- Replacement Velcro strip pairs for air track glider collision experiments
- Hook and claw strips support non-elastic collision demonstrations
- Each strip size is stated as 20 × 75 mm
- Supplied as 2 pairs for multiple glider setups or spare replacement use
- Helps two moving bodies stick together on impact during collision trials
- Supports momentum discussion and post-collision motion observation
- Suitable for supervised laboratory and educational air track use
$4.90 (Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
- Spark recording paper rolls for compatible air track timing systems
- Supports dot pattern recording for motion and velocity experiments
- White spark paper roll is stated as 20 mm wide × 180 m long
- Black spark paper roll is stated as 20 mm wide × 10 m long
- White paper is placed over black spark paper during recording
- Spark passage forms black dots on the underside of the white paper
- Suitable for supervised laboratory and educational air track experiments
From $18.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Track Parts, Educational Mechanics Spare Set
- Spark track spare parts for compatible later model air tracks
- Supports maintenance of spark recording paper and EHV strip setups
- Earth cable connects the paper track back to the air track tube
- Earth cable kit includes flat top screw, nut, cable and banana plug
- Paper guide options suit 2.0 m and 2.5 m air tracks
- EHV strip guide options suit 2.0 m and 2.5 m air tracks
- Select guide length according to the matching air track size
From $13.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Springs, Laboratory Motion Accessory Type
- Air track spring and adapter range for glider motion experiments
- Supports glider joining and simple harmonic motion demonstrations
- Flat loop springs are stainless steel, 12 mm wide, in 30 cm and 15 cm diameters
- Flat loop spring holder clamps into the glider end with screw and nut
- Coil springs include 300 mm and 60 mm options for SHM setups
- Air inlet bush adapts old style end moulding for smaller blower hose use
- Suitable for supervised physics laboratory and educational air track work
From $4.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Stop Block for Track Systems
- Air track stop block component range for compatible track setups
- Supports controlled stopping and impact demonstrations in mechanics experiments
- Felt-lined carrier support glider holds the heavy cast iron stop block
- Heavy cast iron stop block is supplied as the block only
- Stop block fixes to the felt-lined support using screw and nut hardware
- Attachment screw and nut are available as replacement hardware
- Compatibility with existing air track and support fittings should be confirmed
From $2.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
- Black insulated alligator clips for laboratory electrical connections
- Shank accepts compatible 4 mm banana plugs as specified
- Pack of 10 supports classroom and laboratory circuit setups
- Insulated shank supports safer handling during supervised practical work
- Suitable for temporary connections in teaching and demonstration circuits
- Useful for physics, electronics and general laboratory electrical activities
- Confirm 4 mm plug compatibility and circuit limits before use
From $15.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Banana Plugs, 4mm
- Banana plug accessories for laboratory and teaching circuit connections
- Supports use with meters, power supplies and experiment boards
- 2 mm plug to 4 mm socket adaptor links different connector systems
- 4 mm stackable banana plugs support plug-through circuit connections
- Three wire termination methods support flexible cable attachment
- Colour options help with polarity marking and circuit identification
- Suitable for supervised electrical and electronics teaching setups
From $5.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Banana Plugs, 4mm Laboratory Type
- 4 mm banana sockets for building connection points in educational circuits, lab panels and experiment boards
- Pack quantity stated as 10 sockets per option, supports class sets, repairs and bench spares for frequent practical use
- Colour options black, blue, green, red and yellow support polarity marking and clear circuit identification
- Compatible with standard 4 mm banana plugs commonly used on meters, power supplies and teaching equipment
- Suitable for laboratory or educational environments where repeated plug in connections are required, select colour coding to match wiring conventions and reduce setup errors
From $14.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Apparatus Parts and Spares
- Boyle’s Law apparatus parts for syringe and high-pressure demonstrations
- Syringe only component supports weight-loaded gas compression experiments
- Heavy-walled glass tube spares available in open and closed end formats
- Coloured fluid bottle is supplied as enough for one loading
- Complete high-pressure pressure pot is available as a replacement assembly
- O-ring set includes 8 pieces for high-pressure pot sealing applications
- Spare plastic high-pressure air pump is hand pumpable as stated
From $13.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
- Spare glass tubes for classic 1 m high Boyle’s law apparatus, replacement parts for low pressure demonstrations
- Closed end tube option, approx 200 mm length, suits sealed volume end of the classic pattern setup
- Open end tube option, approx 200 mm length, suits open volume end for pressure volume investigation
- Used to restore tube pair operation, supports classroom experiments without replacing full apparatus
- For laboratory or educational settings only, handle glass carefully, inspect for cracks and use under supervision
From $21.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Syringe Only, Commercial Plastic Syringe
- Replacement syringe only for syringe type Boyle’s Law apparatus
- Uses a commercial plastic syringe for gas compression demonstrations
- Supports pressure and volume relationship teaching activities
- Weights can be applied in a compatible setup to compress trapped gas
- Plunger movement markings indicate volume change during experiments
- Suitable for introductory gas law demonstrations in classrooms
- Use with compatible apparatus under appropriate supervision
$3.90 (Ex GST)
Brass Filter Pump with Non-Return Valve
- Nickel plated brass filter pump for water-driven vacuum use
- Provides vacuum assistance to -80 kPa for laboratory filtering
- Side outlet connects to the flask containing the filtrate
- Available with push-on hose or 3/4 inch BSP tap fitting
- Non-return valve included in both supplied fitting options
- Suitable for filtration and stated general vacuum requirements
From $77.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cast Iron Bar Breaker Rods, Pack of 10
- Pack of 10 cast iron rods, replacement break rods for bar breaker demonstration.
- Each rod inserts through bar breaker hole, acts as the sacrificial fracture element.
- Heated bar expansion loads rod until it breaks, giving a loud audible report.
- Supports repeated classes, easy reset by replacing rod, keeps apparatus ready.
- Supervised use recommended, keep clear during heating and break, expect sudden noise.
$15.90 (Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
- Deflagrating spoon for supervised combustion and gas reaction demonstrations
- 300 mm long handle supports safer lowering into compatible glass vessels
- Stainless steel cup provides a practical sample-holding section
- Flange cap and cover support controlled placement during demonstrations
- 60 mm cover diameter as stated in the supplied specification
- Used for demonstrating deflagration in gas-filled vessels
- Suitable for laboratory and educational use under strict supervision
$10.90 (Ex GST)
Deflagrating Spoons with Aluminium Cap
- Deflagrating spoon range for practical gas jar use
- Aluminium cap covers the mouth of the gas jar
- Available with brass cup or iron cup options
- Deep drawn, smoothly rounded cup fitted at rod end
- Cork stopper in the cap supports the spoon rod
- Suitable for school science and teaching laboratory use
From $16.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
- Hoffman screw tubing clips for sealing compatible flexible tubing
- Designed to block air or gas flow by pinching tubing sides together
- Adjustable screw supports controlled closure pressure during use
- Projecting plate helps protect tubing from direct screw damage
- Hinged side bar allows fitting without access to tubing ends
- Available in 18, 20, 25, 30 and 40 mm maximum opening sizes
- Suitable for supervised laboratory and educational tubing workflows
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Nylon Air Track End-of-Track Pulley Attachment
- Air track end pulley on mounting strip, provides fixed pulley point for cord-based air track experiments.
- Flat-top attachment screw included, secures strip to end fitting of air tube for stable mounting.
- Designed for end-of-track installation, supports consistent alignment and smooth cord routing.
- Simple replacement accessory for air track setups, restores pulley function at track end.
- Mounting strip format keeps pulley positioned correctly on tube end fitting during repeated runs.
$20.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Parts and Accessories are essential components that support the proper functioning, maintenance, and adaptability of laboratory equipment and experimental setups. In chemistry, physics, and educational laboratories, these supporting items help ensure that instruments operate correctly, glassware connections remain secure, and experiments can be performed safely and efficiently. Having the right laboratory accessories available improves workflow, reduces equipment downtime, and allows laboratories to configure or repair apparatus when needed.
This category typically includes a wide range of supporting laboratory items such as stoppers, adapters, connectors, clamps, support rods, joint clips, tubing connectors, replacement heads, spare glass components, sealing accessories, and other laboratory fittings. These parts allow users to modify or extend experimental assemblies, replace damaged components, or maintain existing laboratory equipment without replacing the entire apparatus. In many experimental setups, particularly distillation, filtration, and gas handling systems, properly fitted accessories are critical for maintaining airtight connections and stable operation.
Where glass components are involved, borosilicate glass such as BORO 3.3 is widely used because of its strong resistance to thermal shock and chemical exposure. Relevant material standards may include ISO 3585, which specifies the properties of borosilicate glass 3.3 used in laboratory glassware, and ASTM E438, which defines performance requirements for glass used in laboratory apparatus. For volumetric glass components used in accessories or assemblies, ASTM E694 may also apply.
For laboratories using electrically powered equipment with interchangeable parts or accessories, the international safety standard for electrical equipment used in measurement, control, and laboratory environments. Manufacturing and supply processes for laboratory equipment are also commonly aligned with ISO 9001 quality management systems to support consistent product reliability and quality.
At LabChoice Australia, we supply dependable laboratory parts and accessories designed to support chemistry, physics, and general laboratory workflows. Our range helps laboratories maintain equipment, replace essential components, and configure experimental setups with confidence, ensuring reliable operation across education, research, and industrial laboratory environments.