Parts & Accessories
Laboratory parts and accessories include essential components for maintaining and expanding scientific equipment.Designed for compatibility and durability, these items support smooth laboratory operations.Australian laboratories benefit from reliable replacement parts and accessories for ongoing efficiency.
Brass Filter Pump with Non-Return Valve
- Nickel plated brass filter pump for water-driven vacuum use
- Provides vacuum assistance to -80 kPa for laboratory filtering
- Side outlet connects to the flask containing the filtrate
- Available with push-on hose or 3/4 inch BSP tap fitting
- Non-return valve included in both supplied fitting options
- Suitable for filtration and stated general vacuum requirements
From AUD 77.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cast Iron Bar Breaker Rods, Pack of 10
- Cast iron rods for compatible bar breaker apparatus
- Supplied as a pack of 10 rods as listed
- Designed to fit through the hole in a bar breaker
- Used to demonstrate thermal expansion force
- Rod breaks when the heated bar expands
- Produces a loud report during the demonstration
- Useful for physics and heat expansion teaching
- Suitable for school and university teaching laboratories
- Practical replacement consumable for bar breaker experiments
- Confirm bar breaker compatibility before ordering
- Use hearing, eye and safe-distance precautions during demonstrations
- Use under appropriate laboratory or educational supervision
AUD 15.90 (Ex GST)
D Cell Battery Holder, Series or Parallel, Blue, Pack of 4
- Battery holder for D cell batteries
- Allows series or parallel circuit arrangements as listed
- Supplied as a pack of 4 holders
- Blue colour as listed
- Suitable for low-voltage electrical circuit demonstrations
- Useful for school, university and teaching laboratory activities
- Practical for electricity, current, voltage and circuit comparison experiments
- Supports hands-on classroom work with compatible D cells
- Confirm circuit configuration before use
- Battery holder only, D cell batteries are not included
- Avoid short circuits and incorrect polarity
- Use under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
- Deflagrating spoon for supervised combustion and gas reaction demonstrations
- 300 mm long handle supports safer lowering into compatible glass vessels
- Stainless steel cup provides a practical sample-holding section
- Flange cap and cover support controlled placement during demonstrations
- 60 mm cover diameter as stated in the supplied specification
- Used for demonstrating deflagration in gas-filled vessels
- Suitable for laboratory and educational use under strict supervision
AUD 10.90 (Ex GST)
Deflagrating Spoons with Aluminium Cap
- Classical pattern deflagrating spoon for laboratory demonstrations
- Available with brass cup or iron cup options
- Aluminium cap designed to cover the mouth of a compatible gas jar
- Deep drawn cup at the end of the rod
- Smoothly rounded cup design as listed
- Cork stopper in the cap supports the rod
- Suitable for approved combustion and gas jar demonstrations
- Useful for school, university and teaching laboratory use
- Practical apparatus for chemistry demonstrations
- Confirm gas jar size, cup material and experiment method before ordering
- Deflagrating spoon only, gas jar and reagents are not included
- Use under appropriate laboratory or educational supervision
From AUD 16.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
- Hoffman screw tubing clips for sealing compatible flexible tubing
- Designed to block air or gas flow by pinching tubing sides together
- Adjustable screw supports controlled closure pressure during use
- Projecting plate helps protect tubing from direct screw damage
- Hinged side bar allows fitting without access to tubing ends
- Available in 18, 20, 25, 30 and 40 mm maximum opening sizes
- Suitable for supervised laboratory and educational tubing workflows
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
PTFE Joint Sleeves for Standard Taper Ground Glass Joints, 0.5 mm Wall Thickness, Pack of 3
- PTFE sleeves for standard taper ground glass joints
- Supplied as pack of 3 as listed
- Designed to fit between compatible tapered glass joints
- Helps avoid the need for joint grease as listed
- Wall thickness listed as 0.5 mm
- Supports high vacuum performance as listed
- Helps reduce leakage rate in compatible glassware assemblies
- Available for 14/23, 19/26, 24/29, 29/32 and 34/35 joints
- Useful for laboratory glassware setups requiring clean joint separation
- Helps reduce sticking between compatible ground glass joints
- Confirm joint size before ordering
- Use under appropriate laboratory or educational supervision
From AUD 32.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Replacement Hose Assembly for Air Source (Spare),2m
- Spare hose assembly, hose plus end fittings only, replacement line for IEC air blower systems.
- Designed for IEC air blower used on air tracks and air tables, restores flexible air connection.
- Fits newer series air track tube only as specified, correct interface for updated track fittings.
- Older tube can be adapted using reducing bush, reduces hole size to accept new blower hose.
- Accessory part only, blower not included, suitable for maintenance and replacement in teaching labs.
AUD 42.50 (Ex GST)
Steel Balls, Precision Laboratory Grade
- Steel balls supplied as single size sets of 60, diameter options 12.7 mm, 16 mm, 19 mm
- Supports collision investigations, elastic and inelastic interactions, rebound behaviour, and momentum transfer comparisons
- Useful for Newton’s laws demonstrations, acceleration response, force direction changes, and motion analysis activities
- Three sizes allow controlled comparisons of outcomes when diameter changes, while keeping ball count constant
- Suitable for repeat classroom runs, set quantities support group work, sorting, storage, and consistent experiment preparation
From AUD 50.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Support Rack for Radiation Source and Absorber Alignment
- Small plastic support rack for absorber experiments
- Designed to carry a radioactive source and selected absorber in alignment
- Helps maintain consistent positioning during radiation absorption demonstrations
- Normally part of the Absorber Set Kit LC-80-AP0030-001 as listed
- Suitable for school, university and physics teaching laboratories
- Useful for radiation absorption and shielding demonstrations
- Supports controlled placement of source and absorber during practical work
- Helps improve repeatability of classroom demonstration setup
- Confirm compatibility with the absorber set before ordering
- Rack only, absorber kit and radioactive source are not included
- Radioactive materials must only be handled under approved safety procedures
- Use under appropriate laboratory or educational supervision
AUD 46.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Parts and Accessories are essential components that support the proper functioning, maintenance, and adaptability of laboratory equipment and experimental setups. In chemistry, physics, and educational laboratories, these supporting items help ensure that instruments operate correctly, glassware connections remain secure, and experiments can be performed safely and efficiently. Having the right laboratory accessories available improves workflow, reduces equipment downtime, and allows laboratories to configure or repair apparatus when needed.
This category typically includes a wide range of supporting laboratory items such as stoppers, adapters, connectors, clamps, support rods, joint clips, tubing connectors, replacement heads, spare glass components, sealing accessories, and other laboratory fittings. These parts allow users to modify or extend experimental assemblies, replace damaged components, or maintain existing laboratory equipment without replacing the entire apparatus. In many experimental setups, particularly distillation, filtration, and gas handling systems, properly fitted accessories are critical for maintaining airtight connections and stable operation.
Where glass components are involved, borosilicate glass such as BORO 3.3 is widely used because of its strong resistance to thermal shock and chemical exposure. Relevant material standards may include ISO 3585, which specifies the properties of borosilicate glass 3.3 used in laboratory glassware, and ASTM E438, which defines performance requirements for glass used in laboratory apparatus. For volumetric glass components used in accessories or assemblies, ASTM E694 may also apply.
For laboratories using electrically powered equipment with interchangeable parts or accessories, the international safety standard for electrical equipment used in measurement, control, and laboratory environments. Manufacturing and supply processes for laboratory equipment are also commonly aligned with ISO 9001 quality management systems to support consistent product reliability and quality.
At LabChoice Australia, we supply dependable laboratory parts and accessories designed to support chemistry, physics, and general laboratory workflows. Our range helps laboratories maintain equipment, replace essential components, and configure experimental setups with confidence, ensuring reliable operation across education, research, and industrial laboratory environments.