E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
From $8.50 (Ex GST)
From $8.50 (Ex GST)
- 300 mm laboratory leads for compatible 4 mm banana socket systems
- Fitted with 4 mm moulded stackable banana plugs at both ends
- Stackable ends support plug-through and multi-connection circuit setups
- Colour options support polarity marking and circuit identification
- Suitable for standard laboratory and teaching electrical circuits
- Short 300 mm length helps keep bench wiring tidy and organised
- Available in black, blue, green, red and yellow colours
- Description
Description
The 4 mm Banana Plug Cables, also known as 4 mm banana-to-banana laboratory leads, are designed for electrical connection work in compatible laboratory and educational circuit systems. They are suitable for school physics laboratories, electronics classrooms, university teaching laboratories and supervised practical electrical demonstrations. Each cable is 300 mm long and fitted with a 4 mm moulded stackable banana plug at both ends. This format supports direct connection between compatible 4 mm banana sockets on teaching apparatus, meters, power supplies and circuit panels.
The stackable plug design allows plug-through connections where compatible equipment and circuit layout permit. This helps users add another lead at the same connection point without removing the existing lead. The 300 mm length supports tidy bench setups and compact circuit layouts. It helps reduce excess wire slack and tangling during student experiments, especially on smaller trainer panels and shared laboratory benches.
Colour options include black, blue, green, red and yellow. These colours support polarity marking, circuit tracing, signal identification and organised class practical work where multiple leads are used together. Users should confirm 4 mm socket compatibility before use, especially in laboratories where 2 mm and 4 mm banana plug systems are both present. These leads should be used only with compatible apparatus and within the operating limits of the connected equipment.
LabChoice Australia supplies 4 mm Banana Plug Cables for school science departments, physics laboratories, electronics teaching rooms, university practical classes and general educational circuit setups. They are suitable for supervised circuit connection, polarity identification, electrical demonstrations and standard laboratory wiring using compatible 4 mm banana socket systems.
Salinity Test Paper Strips, 50 Strip Pack
$98.50(Ex GST)
Spectrum Tubes 208 mm Length, Set of 6
$254.90(Ex GST)
Reagent Bottle Narrow Mouth with PE Stopper
From $6.50 (Ex GST)
Evaporating Dishes, Laboratory Glass Dish Range for Solvent Removal
From $9.90 (Ex GST)
Infrared Digital Vortex Mixer with Flat Rubber Sleeve
$847.50(Ex GST)
Rubber Adapter Cone Set for Filter Flasks
$19.90(Ex GST)
Three-Way Glass Adapter, Dual Parallel Necks with 45° Side Arm BORO 3.3 Glass
From $31.90 (Ex GST)
Vertical Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
From $21.90 (Ex GST)
Refraction Tanks, Semicircular Light Refraction Study Type
From $16.50 (Ex GST)
Grey Silicone Bench Mats For Laboratory
From $7.90 (Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From $7.50 (Ex GST)
Air Table Pucks & Pivot Pin, Lab Accessory Pack
From $6.90 (Ex GST)
Air Track Attachment Screws, Accessory
From $2.50 (Ex GST)
Air Track Foot, Laboratory Track Support Unit
From $1.90 (Ex GST)
Air Track Glider Attachments, Inelastic Collision Accessory Set
From $78.50 (Ex GST)
Air Track Gliders for Low Friction Motion
From $32.90 (Ex GST)
Air Track Installation & User Manual
From $6.90 (Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
$4.90(Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From $18.50 (Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From $4.90 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From $15.90 (Ex GST)
Banana Plugs, 4mm
From $5.50 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From $21.90 (Ex GST)
Brass Filter Pump with Non-Return Valve
From $77.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
