T-Shaped Vacuum Inlet Adapter with Dual Hose Connections, BORO 3.3 Glass
- T-shaped inlet adapter for vacuum or inert gas applications
- Made from BORO 3.3 borosilicate glass
- Features dual 3/8 inch hose connections
- Designed to allow two hoses to be connected at the same time
- Suitable for multi-line gas or vacuum input setups
- Available joint sizes include 14/20, 19/22, 24/40 and 24/29
- Inner joint design for compatible laboratory glassware systems
- T-shaped dual-tube design supports even gas or vacuum flow
- Listed stable operating temperature is up to 450°C
- Instantaneous temperature change should not exceed 140°C
- Confirm hose, joint, vacuum and gas compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 38.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tall Form Beakers, Borosilicate Glass, Graduated with Spout
- Tall form borosilicate glass beakers for laboratory use
- Available in 250 mL, 500 mL and 1000 mL capacities
- Each beaker includes a pouring spout
- Graduated markings support approximate volume reference
- 250 mL size measures 120 × 60 mm
- 500 mL size measures 142 × 75 mm
- 1000 mL size measures 192 × 90 mm
- Suitable for mixing, heating, pouring and solution preparation workflows
- Useful for school, university and general laboratory environments
- Confirm chemical and temperature compatibility before use
- Handle carefully and avoid thermal shock
From AUD 2.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tall-Form Fused Silica Crucibles without Lid
- Tall form crucibles for laboratory heating applications
- Supplied without lid
- Material listed as fused silica
- Translucent fused silica crucible format
- Temperature suitability listed up to 1000°C
- Suitable for selected laboratory heating and sample preparation workflows
- Useful for chemical synthesis, metallurgy and controlled heating applications
- Fused quartz transparent crucibles are available on request
- Confirm size, capacity, chemical compatibility and heating method before use
- Use under appropriate laboratory or educational supervision
From AUD 49.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tapered Cork Stoppers, Agglomerated Cork for Bottles and Laboratory Vials, Pack of 25
- Tapered cork stoppers for bottles, vials and laboratory containers
- Made from cork granules as listed
- Agglomerated cork quality as listed
- Also known as composition cork stoppers
- Designed to plug compatible bottles and lab vials
- Tapered profile helps provide a secure fit
- Customised sizes may be available by special request
- Boring and partway boring may be available with sketch approval
- Higher quality cork options may be available by special request
- Confirm stopper size and container opening before ordering
- Use under appropriate laboratory or educational supervision
From AUD 6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
TC Treated Cell Culture Flasks, Sterile Culture Surface Range for Routine Cell Work
- TC treated cell culture flasks for routine adherent cell culture workflows
- Growth area options include 25 cm², 75 cm² and 175 cm²
- Flask volume options include 50 mL, 250 mL and 750 mL
- Cap options include plug seal cap and vent cap formats
- 25 cm² sealed cap option has recommended medium volume of 5 to 7.5 mL
- 25 cm² sealed cap option is supplied as pack 10, case 200
- Suitable for research, teaching and routine cell culture laboratory use
From AUD 168.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
TDS Tester Kit TDS20 Pocket Tester for TDS/EC Water Testing, 0 to 20.00 mS/cm
- Value pocket TDS tester kit suitable for routine water-quality checking where a simple handheld meter is preferred
- Practical choice for tap water, drinking water, agriculture, aquaculture, swimming pools and education workflows
- Helps users carry out regular ppm-style water checks in field, classroom, pool and basic laboratory environments
- Compact kit format supports portable testing without needing a full benchtop conductivity meter setup
- Suitable for users needing an economical tester for routine dissolved-solids and conductivity-related water monitoring
- Rugged kit format helps support day-to-day use in wet or outdoor water-testing environments
AUD 129.00 (Ex GST)
Teaching Stethoscope, Single Head, Single Diaphragm
- Teaching stethoscope for nursing student training and healthcare education
- Single head and single diaphragm format supports straightforward learning
- Aluminium chestpiece has a stated diameter of 4.7 cm
- Aluminium earhooks have a stated length of 17 cm
- PVC tube has a stated length of 60 cm for practical student handling
- Full stethoscope length is stated as 75 cm
- Suitable for supervised classroom demonstration and basic listening practice
AUD 22.50 (Ex GST)
TechTray Dissecting and General Purpose Laboratory Tray
- General purpose TechTray for dissection and chemistry laboratory work
- Suitable for dissecting, specimen handling and general lab bench workflows
- Made from hygienic, lightweight polypropylene
- Stackable design supports efficient classroom and laboratory storage
- Listed as autoclavable polypropylene
- Etched scale supports practical measurement reference
- Anchor points allow specimens to be secured with string
- Non-slip rubber feet help grip the workbench
- Working area listed as 340 × 290 mm
- Overall tray dimensions listed as 470 × 330 mm
- Supplied with one disposable dissecting mat
- Not dishwasher safe, elevated dishwasher temperatures may warp the tray
AUD 27.00 (Ex GST)
Temperature Probe MP500 with RCA Connector for Apera Meters, -10 to 110°C
- Temperature probe suitable for automatic temperature compensation with compatible Apera meters
- Practical accessory for use alongside pH or conductivity electrodes during measurement
- Compatible with selected Apera meters including PH700, SX823-B, PH800 and PC800
- Stainless steel probe construction supports routine laboratory and field testing workflows
- RCA connector allows connection to compatible meter temperature-input ports
- Suitable for users needing separate temperature measurement where the main electrode does not include built-in ATC
AUD 110.00 (Ex GST)
Tensile Testing Machine for Strength of Materials
- Tensile testing machine for laboratory and educational use
- Designed for strength of materials demonstrations
- Measures tensile extension of wire samples
- Uses an accurate dial indicator as listed
- Dial indicator resolution listed as 0.01 mm
- Tensile force is applied using normal slotted weights
- Provides 3 anchor points for testing different wire lengths
- Supplied with copper, brass and iron wire rolls as listed
- Suitable for classroom experiments with relatively small forces
- Slotted weight sets are not supplied with the machine
- Wire under tension may snap during testing
- Use under appropriate laboratory or educational supervision
AUD 389.50 (Ex GST)
Test Tube Cleaning Brushes, Nylon Bristles
- Test tube cleaning brushes for laboratory and educational use
- Available in large, medium, small and micro sizes
- Nylon bristles for routine manual cleaning applications
- Fanned bristle ends help clean internal tube surfaces
- Galvanised wire rod construction
- Large brush suits test tubes from 18 mm to 25 mm
- Medium brush suits test tubes from 12 mm to 16 mm
- Small brush suits test tubes from 9 mm to 12 mm
- Micro brush has 60 mm × 10 mm fanned bristle section
- Suitable for school, university and general laboratory use
- Confirm test tube diameter and brush suitability before use
- Use under appropriate laboratory or educational supervision
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Holder, Wooden Peg Type, 180 mm Long
- Wooden peg type test tube holder for routine laboratory use
- Holds compatible test tubes up to 20 mm diameter
- 180 mm length provides practical reach during tube handling
- Peg style design supports simple manual gripping of test tubes
- Wooden construction provides a lightweight reusable holder format
- Suitable for classroom demonstrations and preparation room use
- For supervised laboratory and educational use only
AUD 3.50 (Ex GST)
Test Tube Rack Aluminium, High Quality
- Aluminium test tube rack for laboratory tube holding
- High quality construction for routine laboratory use
- Lightweight rack format for practical bench handling
- Suitable for organising compatible test tubes during workflows
- Supports upright tube placement on laboratory benches
- Practical for teaching, research and routine sample preparation
- Confirm tube diameter, rack capacity and cleaning suitability before use
From AUD 17.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Rack Stainless Steel, High Quality
- Stainless steel test tube rack for laboratory tube holding
- High quality construction for routine laboratory use
- Suitable for organising compatible test tubes during workflows
- Supports upright tube placement on laboratory benches
- Practical for teaching, research and routine sample preparation
- Easy to clean using suitable laboratory cleaning procedures
- Confirm tube diameter, rack capacity and chemical compatibility before use
From AUD 24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Racks, Polypropylene 24 Holes for 25 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of 25 mm tube types
- 24-hole layout supports routine tube handling in laboratories and classrooms
- 3 × 8 row design helps keep test tubes stable and easy to access
- Colour options include red, blue, white and green for simple bench organisation
- Overall rack size is stated as 250 × 105 × 70 mm across the listed variations
- Suitable for preparation, observation, handling and short-term bench organisation tasks
- Blue variation is listed as self assembly for practical laboratory setup
From AUD 8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Racks, Polypropylene 40 Holes for 20 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of compatible 20 mm tubes
- 40-hole layout supports routine tube handling in laboratories and classrooms
- 4 × 10 row design helps keep tubes upright, separated and easy to access
- Colour options include red, blue, white and green for simple bench organisation
- Suitable for preparation, observation, sorting and short-term bench storage tasks
- Practical rack design supports stable tube arrangement during daily laboratory use
- Blue variation is listed as self assembly for practical laboratory setup
From AUD 8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Racks, Polypropylene 60 Holes for 16 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of compatible 16 mm tubes
- 60-hole layout supports routine tube handling in laboratories and classrooms
- 5 × 12 row design helps keep tubes upright, separated and easy to access
- Colour options include red, blue, white, yellow and green for bench organisation
- Suitable for preparation, observation, sorting and short-term bench storage tasks
- White variation has a stated overall size of 250 × 106 × 68 mm
- Blue variation is listed as self assembly for practical laboratory setup
From AUD 8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Racks, Polypropylene 90 Hole for 13 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of compatible 13 mm tubes
- 90-hole layout supports high-capacity tube handling in laboratories and classrooms
- 6 × 15 row design helps keep tubes stable, separated and easy to access
- Colour options include red, blue, white and green for simple bench organisation
- Suitable for preparation, observation, sorting and short-term bench storage tasks
- Practical rack design supports routine laboratory setup and daily tube management
- Blue variation is listed as self assembly for practical laboratory use
From AUD 8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Stand, 3-Tier Polypropylene, 12 Places
- Three-tier test tube stand for laboratory and educational use
- Manufactured from durable polypropylene (PP) plastic
- Accommodates 12 test tubes with a listed diameter of 32 mm
- Three-tier design provides convenient access and visibility of samples
- Autoclavable construction supports laboratory sterilisation procedures
- Suitable for sub-freezing laboratory temperatures as specified
- Opaque, uniformly coloured polypropylene construction
- Stable design helps organise tubes and reduce accidental tipping
- Compact benchtop dimensions of 13 cm high × 26 cm long
- Suitable for sample handling, tube storage and laboratory organisation
- Ideal for chemistry, biology, research and educational laboratories
AUD 24.00 (Ex GST)
Test Tubes Round Bottom, Rimless, Heat Resistant, BORO 3.3 Glass
- Rimless edge minimizes contamination and chipping
- Round bottom supports even heating distribution
- Highly heat resistant – suitable for open flame use
- Ideal for flame sealing, boiling, and autoclaving
- Used in chemistry, biology, plant science, and TLC
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 31.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tubes, Round Bottom with Rim, Borosilicate Glass (BORO 3.3)
- Round bottom enables uniform heat distribution
- Rimmed edge supports safe handling and pouring
- Suitable for heating, mixing, and sample storage
- Used in teaching labs, research, and diagnostics
- Durable under flame, autoclave, and chemical exposure
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 18.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thermal Conductivity Bars, Copper, Brass, Aluminium and Steel
- Thermal conductivity bars for laboratory and educational use
- Demonstrates heat conduction through different metals
- Includes copper, brass, aluminium and steel bars as listed
- Designed for use with a beaker of hot water
- Provides an effective visual display of metal conductivity differences
- Dimensions listed as 200 × 50 × 6 mm
- Colour-change squares help show heat transfer along each metal
- Suitable for heat transfer and materials science demonstrations
- Useful for comparing relative conductivity between metals
- Requires hot water at approximately 60°C or above as listed
- Take precautions when handling hot or boiling water
- Use under appropriate laboratory or educational supervision
AUD 34.90 (Ex GST)
Thermometer Anti-Roll Rings, Blue Rubber, Pack of 100
- Anti-roll ring accessory for compatible laboratory thermometers
- Blue rubber construction as listed
- Helps reduce thermometer rolling on bench surfaces
- Practical accessory for school and teaching laboratory use
- Suitable for compatible glass thermometer handling workflows
- Helps improve bench organisation during practical activities
- Useful for laboratory maintenance and replacement stock
- Supplied as a pack of 100 rings
- Confirm thermometer diameter compatibility before ordering
- Anti-roll rings only, thermometers are not included
- Handle glass thermometers carefully during fitting
- Use under appropriate laboratory or educational supervision
AUD 44.90 (Ex GST)
Thermometer Cone Adapter, Borosilicate Glass with Threaded Top
- Threaded top ensures secure thermometer positioning
- Cone joint allows integration with lab apparatus
- Ideal for distillation, reflux, and temperature monitoring
- Supports airtight sealing and precise placement
- Used in teaching, research, and industrial labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 21.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thermometer Stand, 18 Place Aluminium Storage Rack with Rubber Base
- Rugged thermometer stand for laboratory thermometer storage
- Holds up to 18 standard thermometers
- Aluminium construction as listed
- Powder coated blue finish
- Rugged and sturdy design for routine laboratory use
- Protective rubber foam bottom helps protect thermometer bulbs
- Rack dimensions listed as 170 × 120 × 130 mm
- Hole diameter listed as 9.8 mm
- Suitable for standard thermometers up to 9 mm diameter
- Suitable for thermometers up to 405 mm high
- Thermometer stand only, thermometers are not included
- Use under appropriate laboratory or educational supervision
AUD 34.90 (Ex GST)
Save 25%
Thermostat Heat Control with Combined Hot Plates & Magnetic Stirrer
- Thermostat heat control for regulated laboratory heating
- Hot plate and magnetic stirrer combination for heating and mixing
- Adjustable temperature control helps maintain the selected heat setting
- Variable stirring function supports routine mixing applications
- Suitable for sample preparation, solution heating, and classroom experiments
- Designed for laboratories, schools, and science teaching environments
- Practical benchtop unit for controlled heating with magnetic stirring
- Available from LabChoice Australia for Australian laboratory use
From AUD 715.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thiele Melting Point Tube, BORO 3.3 Glass
- Thiele melting point tube for laboratory and educational use
- Used for determining melting point of compatible solid materials
- Made from 3.3 borosilicate glass as listed
- Heavy-duty glass construction as listed
- Suitable for organic compound melting point demonstrations
- Total length listed as 150 mm / 6 inch
- Available in 18 mm and 25 mm OD options
- Useful for chemistry teaching and laboratory practicals
- Supports controlled heating with suitable bath liquid and thermometer setup
- Confirm heating method and bath liquid compatibility before use
- Glass and hot liquid require careful handling
- Use under appropriate laboratory or educational supervision
From AUD 19.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thimson Twaddle Hydrometer for Liquid Density Measurement
- Twaddle hydrometers for laboratory liquid measurement
- Used to measure specific gravity or relative density as listed
- Brand listed as Thimson
- Material listed as glass hydrometer
- Approximate length listed as 260 mm
- Twaddle scale is based on specific gravity as listed
- Available in hydrometer numbers 1 to 5
- Measuring ranges cover 0 to 138 Twaddle as listed
- Suitable for compatible laboratory and industrial liquid testing
- Rigid body and low maintenance features listed
- Glass hydrometers should be handled carefully
- Use under appropriate laboratory or educational supervision
From AUD 49.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thin Heating Block for 0.5 mL Tubes, 40 Holes
- Thin heating block for compatible mini dry bath and dry bath systems
- Designed for 0.5 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 8.2 mm diameter × 26.4 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 0.5 mL tube fit before use
Thin Heating Block for 1.5 mL Tubes, 40 Holes
- Thin heating block for compatible mini dry bath and dry bath systems
- Designed for 1.5 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 1.5 mL tube fit before use
Thin Heating Block for 2 mL Tubes, 40 Holes
- Thin heating block for compatible mini dry bath and dry bath systems
- Designed for 2 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 2 mL tube fit before use
Thistle Funnel, BORO 3.3 Glass
- BORO 3.3 borosilicate glass thistle funnel for controlled liquid addition in lab setups
- Long stem design helps deliver liquids into flasks or apparatus with reduced splashing
- Suitable for reagent transfer in chemistry, distillation, and general laboratory work
- Clear glass construction allows easy visibility of liquid flow during use
- Good thermal and chemical resistance for routine laboratory applications
- Reusable glassware option for schools, universities, research, and industrial labs
- Easy to clean and compatible with standard wet chemistry bench procedures
AUD 8.40 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.