Thimson Twaddle Hydrometer for Liquid Density Measurement
From AUD 49.50 (Ex GST)
From AUD 49.50 (Ex GST)
- Twaddle hydrometers for laboratory liquid measurement
- Used to measure specific gravity or relative density as listed
- Brand listed as Thimson
- Material listed as glass hydrometer
- Approximate length listed as 260 mm
- Twaddle scale is based on specific gravity as listed
- Available in hydrometer numbers 1 to 5
- Measuring ranges cover 0 to 138 Twaddle as listed
- Suitable for compatible laboratory and industrial liquid testing
- Rigid body and low maintenance features listed
- Glass hydrometers should be handled carefully
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Twaddle Hydrometers, also known as glass Twaddle scale hydrometers, are designed for measuring the specific gravity or relative density of compatible liquids in laboratory and industrial workflows. These hydrometers are made from glass and are listed under the Thimson brand, with an approximate length of 260 mm. The Twaddle scale is described as a simplified scale based on specific gravity, making these hydrometers useful where Twaddle readings are required for compatible liquid density checks.
The range is supplied across five hydrometer numbers, allowing users to select the appropriate instrument according to the expected density range of the sample. Available options include No. 1, 0 to 26, No. 2, 24 to 50, No. 3, 48 to 74, No. 4, 72 to 104 and No. 5, 102 to 138 as listed. These hydrometers may be used in teaching laboratories, quality checking areas, industrial laboratories and general liquid measurement workflows where a Twaddle scale hydrometer is suitable.
Users should confirm required hydrometer number, Twaddle range, sample temperature, measuring cylinder size, liquid compatibility, reading method and cleaning procedure before ordering or use. For reliable readings, use a clean hydrometer and a suitable measuring cylinder, allow the hydrometer to float freely, avoid contact with the cylinder wall and read the meniscus according to the approved laboratory method. Glass hydrometers should be handled carefully. Avoid impact, dropping, sudden temperature change and contact with unsuitable chemicals that may affect the glass or scale.
Do not use broken or cracked hydrometers. If breakage occurs, follow approved glass cleanup and chemical spill procedures for the liquid being tested. This product is intended for laboratory, industrial or educational settings only and should be used under appropriate supervision. This item is supplied as the selected Twaddle Hydrometer only. Measuring cylinder, sample liquid, thermometer, calibration certificate, protective case, cleaning accessories, PPE and additional hydrometers are not included unless specified separately.
LabChoice Australia supplies Twaddle Hydrometers and laboratory liquid measurement tools for school science laboratories, university teaching laboratories, research facilities, industrial laboratories and general laboratory environments requiring practical instruments for specific gravity and relative density checks.
| ITEM CODE | HYDROMETER NO. |
|---|---|
| LC-17-TTH4051 | 1 (0 to 26) |
| LC-17-TTH4052 | 2 (24 to 50) |
| LC-17-TTH4053 | 3 (48 to 74) |
| LC-17-TTH4054 | 4 (72 to 104) |
| LC-17-TTH4055 | 5 (102 to 138) |
Electrostatics Experiment Kits, Static Electricity Experiment Set
From AUD 72.50 (Ex GST)
LCD Magnetic Stirrer with Aluminum with ceramic coating Work Plate
From AUD 1,326.00 (Ex GST)
Pycnometer Bottle with Thermometer, Class A, BORO 3.3 Glass
From AUD 79.90 (Ex GST)
Circuit Board MES Lampholder with Spring Contacts
AUD 8.90(Ex GST)
Permanent Magnet Wand, Moulded in Plastic
AUD 7.50(Ex GST)
Glass Tube Connector, T Shape for Laboratory Tubing
AUD 0.80(Ex GST)
Bunsen Burner for Natural Gas & LPG, Adjustable Flame Laboratory Burner
From AUD 20.00 (Ex GST)
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
You May Also Need
Block for Cuvettes
AUD 392.00(Ex GST)
Digital Bench Top Abbe Refractometer for Refractive Index Measurement
AUD 8,050.50(Ex GST)
Digital Colony Counter, LED Display with Pressure Sensor and Ring Lamp
AUD 1,707.90(Ex GST)
Digital Dry Block Heater, Four Block, 200°C
AUD 1,844.00(Ex GST)
Digital Orbital Shaker
From AUD 3,080.00 (Ex GST)
Digital Wine Refractometer, 0 to 45% Brix, 0 to 22% VOL
AUD 549.50(Ex GST)
Flat Block for Vials
AUD 254.00(Ex GST)
Hybridisation Oven
AUD 6,274.00(Ex GST)
Medium Reciprocating Shaker
AUD 3,640.00(Ex GST)
Micro Tray Block
From AUD 308.00 (Ex GST)
Plastic Coated Wire Bottle Carrier for Laboratory Bottle Handling
AUD 69.90(Ex GST)
Round Block with Holes For Tubes
From AUD 227.00 (Ex GST)
Simmerstat Hot Plates
From AUD 580.90 (Ex GST)
Water Bath Temperature Controller for Hot Plate
AUD 236.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
Sikes Hydrometers, Glass, for Alcohol Strength Testing
From AUD 49.50 (Ex GST)
Light Liquids Hydrometer, Glass, Specific Gravity and Baume
AUD 39.50(Ex GST)
Fused Quartz Tubing, Temperature Resistant up to 1000°C
From AUD 16.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab