E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
TDS Tester Kit TDS20 Pocket Tester for TDS/EC Water Testing, 0 to 20.00 mS/cm
AUD 129.00(Ex GST)
AUD 129.00(Ex GST)
- Value pocket TDS tester kit suitable for routine water-quality checking where a simple handheld meter is preferred
- Practical choice for tap water, drinking water, agriculture, aquaculture, swimming pools and education workflows
- Helps users carry out regular ppm-style water checks in field, classroom, pool and basic laboratory environments
- Compact kit format supports portable testing without needing a full benchtop conductivity meter setup
- Suitable for users needing an economical tester for routine dissolved-solids and conductivity-related water monitoring
- Rugged kit format helps support day-to-day use in wet or outdoor water-testing environments
[request_quote_button]
- Description
- Datasheets & Manuals
Description
TDS Tester Kit TDS20 Value Pocket for Water Testing, 0 to 20.00 mS/cm, also known as a pocket TDS tester kit or conductivity ppm tester, is designed for routine dissolved-solids and conductivity-related water testing in a compact handheld format. This kit is suitable for tap water, drinking water, agriculture, aquaculture, swimming pools, education and general water-quality checks where users need a simple portable tester for regular monitoring.
The TDS20 uses platinum black conductivity probe technology to support wide-range measurement with good accuracy and consistency during routine water testing. It is useful for users who need quick ppm-style checks without setting up a larger laboratory meter. The display shows temperature and TDS values together, with indicators for stable readings and completed calibrations. Self-diagnosis, out-of-range warning and incorrect calibration reminders help support more consistent daily operation.
The IP67 waterproof and dustproof design is suitable for wet testing environments, and the tester floats on water if accidentally dropped. AAA battery operation, low power warning and auto power-off support portable use in field and classroom workflows.
Included with this TDS Tester Kit: TDS20 Value Pocket TDS Tester, 1413 µS Calibration Solution, 12.88 mS Calibration Solution, AAA Batteries, Lanyard and Rugged Carrying Case.
Users should follow the correct calibration, rinsing, probe cleaning and storage procedure to support stable readings and probe service life. TDS factor, sample range and calibration solution selection should be confirmed before regular testing.
LabChoice Australia supplies TDS Tester Kits for schools, universities, agriculture users, aquaculture teams, pool testing users and routine water-quality testing workflows.
Features
- TDS20 Value Pocket TDS Tester Kit
- Conductivity measuring range: 0 to 20.00 mS/cm
- Conductivity accuracy: ±1% F.S.
- Automatic temperature compensation: 0 to 50°C
- 1–2 point automatic calibration
- Platinum black conductivity probe technology
- Temperature and TDS dual display
- Ultra-clear display
- 180° viewing angle screen
- Completed calibration indication
- Stable reading indication
- Self-diagnosis function
- Out-of-range warning
- Incorrect calibration reminder
- IP67 waterproof and dustproof design
- Floats on water
- AAA battery powered
- 200 hours continuous operation listed in supplied information
- Low power warning
- Auto power-off after 8 minutes without operation
- 1413 µS calibration solution included
- 12.88 mS calibration solution included
- AAA batteries included
- Lanyard included
- Rugged carrying case included
- Calibration routine, TDS factor, probe care, sample suitability and storage procedure should be confirmed before use
Warranty
The instrument is covered for defects in material and workmanship for two years, while the probe is covered for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
| Meter’s Technical Specs | ||
|---|---|---|
| TDS | Range | 0 to 100.0 ppm, 0 to 1000 ppm, 0 to 10.00 ppt |
| Resolution | 0.1/1 ppm; 0.01 ppt | |
| Accuracy | ±1% F.S. | |
| Calibration Points | Automatic 1 to 2 points | |
| Temperature Compensation | Auto Temperature Compensation
0 to 50 °C (32 to 122°F) |
|
| Temp | Range | 0 to 50°C (32 to 122°F) |
| Resolution | 0.1°C | |
| Accuracy | ±0.5°C | |
| LCD | 180° Viewing Angle LCD | |
| Stable Reading Indication | Smiley Face icon | |
| Low-Battery Warning | Battery icon flashing, reminder of battery replacement | |
| Self-Diagnosis | Yes | |
| Heads-Up Function | No | |
| Auto. Power-Off | Yes, auto power-off in 8 minutes without operation | |
| Waterproof Rating | IP67; Floatable | |
| Power | DC3V, AAA batteries*4 | |
| Battery Life | Continuous operation up to 1000 hours | |
| Dimensions& Weight | Tester: (40*31*178) mm/ 107g With case_(190*165*40) mm/ 438g | |
| Electrode’s Technical Specs | ||
| Application | Regular water solution testing, such as pools and spas, hydroponics, tap water, drinking water, water treatment, waste water treatment, aquaculture, etc. | |
| Type of Sensor | BPB (Brush-Resistant Platinum Black) | |
| Replaceable | No | |
| Temperature sensor | Yes | |
| Range | 0.1 μS to 20.00 mS | |
| Temperature Range | 0 to 50°C (32 to 122°F) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Flat Block for Vials
AUD 254.00(Ex GST)
Adam ATP2 Printer Paper Rolls, 10 Pack
AUD 220.50(Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
LCD Magnetic Hotplate Stirrer with 4 Inch Glass Ceramic Plate, 10 L Capacity
AUD 857.00(Ex GST)
Teaching Stethoscope, Single Head, Single Diaphragm
AUD 22.50(Ex GST)
Brass Thermometer Cases, Slot Front, Case Only
From AUD 28.90 (Ex GST)
Glass Blowing Tube, BORO 3.3, 18 mm OD with 1.8 mm Wall Thickness
From AUD 27.00 (Ex GST)
Double Hooked Weight Calibration Set
AUD 124.50(Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Conductivity Sensor, 0 µS/cm to 199.9 mS/cm Measurement Range
AUD 143.00(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab