E
x
p
l
o
r
e
M
o
r
e
:
Glass Adapters & Connectors
Materials: Borosilicate Glass
T-Shaped Vacuum Inlet Adapter with Dual Hose Connections, BORO 3.3 Glass
- T-shaped inlet adapter for vacuum or inert gas applications
- Made from BORO 3.3 borosilicate glass
- Features dual 3/8 inch hose connections
- Designed to allow two hoses to be connected at the same time
- Suitable for multi-line gas or vacuum input setups
- Available joint sizes include 14/20, 19/22 and 24/40
- Inner joint design for compatible laboratory glassware systems
- T-shaped dual-tube design supports even gas or vacuum flow
- Listed stable operating temperature is up to 450°C
- Instantaneous temperature change should not exceed 140°C
- Confirm hose, joint, vacuum and gas compatibility before use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The T-Shaped Vacuum Inlet Adapter with Dual Hose Connections, BORO 3.3 Glass BORO 3.3 Glass, also known as a T-shaped gas inlet adapter, is designed for introducing vacuum or inert gas into compatible laboratory apparatus. This adapter is made from BORO 3.3 borosilicate glass, providing good heat and chemical resistance for standard laboratory use where compatible gases, chemicals and approved procedures are followed. The T-shaped design allows two hoses to be connected at the same time, supporting multi-line gas or vacuum input arrangements in compatible glassware setups. The adapter features an inner joint and dual 3/8 inch hose connections, allowing flexible connection to suitable laboratory tubing.
Available joint sizes include 14/20, 19/22 and 24/40, helping users select the correct adapter size for their compatible glassware system. The dual-tube layout is designed to help distribute gas or vacuum flow through the connected apparatus, depending on the complete setup and laboratory method. This adapter is suitable for chemistry laboratories, university teaching laboratories, research facilities and general laboratory environments requiring controlled vacuum or inert gas connection points. Users should confirm the required joint size, hose internal diameter, tubing material, vacuum rating, gas compatibility, clamp support and full apparatus configuration before ordering or use. The listed stable operating temperature is up to 450°C, and instantaneous temperature changes should not exceed 140°C. The complete assembly should always be checked against the lowest-rated connected component.
Avoid impact, sudden temperature changes, side loading on glass joints, unsupported tubing weight and excessive force when fitting or removing hoses. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the selected T-shaped vacuum/inert gas inlet adapter only. Tubing, clamps, stands, reaction flask, condenser, vacuum pump, gas cylinder, regulator and additional glassware accessories are not included unless specified separately.
LabChoice Australia supplies BORO 3.3 Vacuum and Inert Gas Inlet Adapters for chemistry laboratories, university teaching laboratories, research facilities and general laboratory environments requiring practical glassware adapters for compatible gas and vacuum systems.
Flat Bottom Flask Two Neck Jointed, BORO 3.3 Glass
From AUD 19.90 (Ex GST)
Special Price
Graham Reflux Condenser BORO 3.3 Borosilicate Glass
From AUD 69.90 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Lever and Fulcrum Set with Weights and Hangers Included 1 m long
AUD 211.90(Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
Adam CB Compact Digital Balances with External Calibration
From AUD 145.00 (Ex GST)
Polyethylene Tube Connectors, Straight, T and Y Shape
From AUD 0.80 (Ex GST)
Cylinder Head CC Measuring Kit, BORO 3.3 Glass
From AUD 99.90 (Ex GST)
Reduction / Reducer Adapter Borosilicate Glass Laboratory Grade
From AUD 11.90 (Ex GST)
You May Also Need
Caps for Schlenk Flasks BORO 3.3 Glass
AUD 32.95(Ex GST)
Claisen Head Multiple Adapter BORO 3.3 Glass Laboratory Grade
From AUD 23.90 (Ex GST)
Flow Control Bend Adapter with Glass Stopcock BORO 3.3 Glass Laboratory Grade
From AUD 25.90 (Ex GST)
Flow Control Bend Adapter with PTFE Stopcock, BORO 3.3 Glass, Laboratory Grade
From AUD 24.90 (Ex GST)
Glass Pocket Thermometer Adapter BORO 3.3 Laboratory Grade
From AUD 12.90 (Ex GST)
Hose Connection Adapter Bent BORO 3.3 Glass Laboratory Grade
From AUD 23.90 (Ex GST)
Multiple Connection Glass Bend Adapter (PIG Type) BORO 3.3
From AUD 59.90 (Ex GST)
Receiver Bent Adapter with Vacuum Connection, Borosilicate Glass (BORO 3.3)
From AUD 17.00 (Ex GST)
Receiver Delivery Adapter Short Stem BORO 3.3 Glass Laboratory Grade
From AUD 10.50 (Ex GST)
Save 21%
Receiver Straight Delivery Adapter, Borosilicate Glass (BORO 3.3)
From AUD 9.90 (Ex GST)
Recovery Bend Adapter with Sloping Elbow End, High Quality Borosilicate Glass (BORO 3.3)
From AUD 9.50 (Ex GST)
Rotary Evaporator Bump Trap Adapter, BORO 3.3 Glass
From AUD 69.90 (Ex GST)
Three-Way Glass Adapter, Dual Parallel Necks with 45° Side Arm BORO 3.3 Glass
From AUD 31.90 (Ex GST)
Warming Coil Adapter B24 Joint BORO 3.3 Glass Laboratory Grade
AUD 89.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab