E
x
p
l
o
r
e
M
o
r
e
:
Mechanics & Fluids
Tensile Testing Machine for Strength of Materials
AUD 389.50(Ex GST)
AUD 389.50(Ex GST)
- Tensile testing machine for laboratory and educational use
- Designed for strength of materials demonstrations
- Measures tensile extension of wire samples
- Uses an accurate dial indicator as listed
- Dial indicator resolution listed as 0.01 mm
- Tensile force is applied using normal slotted weights
- Provides 3 anchor points for testing different wire lengths
- Supplied with copper, brass and iron wire rolls as listed
- Suitable for classroom experiments with relatively small forces
- Slotted weight sets are not supplied with the machine
- Wire under tension may snap during testing
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Tensile Testing Machine for Strength of Materials, also known as a classroom tensile strength apparatus or wire extension testing machine, is designed for measuring and demonstrating the tensile behaviour of metal wires. The IEC tensile testing machine uses wire samples so that the forces involved remain suitable for classroom application, allowing students to investigate extension, tensile loading and material comparison in a controlled educational setup. An accurate dial indicator with a listed resolution of 0.01 mm is used to measure stretch or extension as load is applied to the wire.
Tensile force is applied using standard slotted weights, allowing students to observe the relationship between applied load and wire extension during strength of materials experiments. The machine provides 3 different anchor points, allowing wire samples to be tested at 3 effective lengths for comparison of extension and material behaviour. The apparatus is supplied with rolls of 0.037 mmD copper wire, 0.32 mmD brass wire and 0.28 mmD iron wire as listed.
The 9 × 50 g and / or 9 × 100 g slotted weight sets are not supplied with the machine and should be ordered separately if required for the experiment. Users should confirm wire diameter, supplied wire type, compatible slotted weight set, load range, dial indicator operation and classroom test procedure before use. Wire samples under tension can snap suddenly. Wear suitable eye protection, keep face and hands clear of the wire path and do not overload the apparatus beyond the approved classroom method.
Weights should be added and removed carefully to prevent dropping, sudden loading or damage to the apparatus. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected tensile testing machine with listed wire rolls only. Slotted weight sets, additional wires, safety screens, PPE, worksheets and additional strength of materials accessories are not included unless specified separately.
LabChoice Australia supplies Tensile Testing Machines and strength of materials teaching apparatus for school science laboratories, university teaching laboratories and educational facilities requiring practical demonstrations of tensile force, extension and material behaviour.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Magnetic Field, Cavity Type with Iron Bars, 200 x 100mm
AUD 17.50(Ex GST)
Filter Funnels Long Stem 60 Degree Cone, BORO 3.3 Glass
From AUD 1.90 (Ex GST)
Ice Box 4°C Thermostatic Cooling Unit with Choice of 1 Optional Block
AUD 1,122.00(Ex GST)
Millikan’s Apparatus, Electron Charge Demonstration Unit
From AUD 824.90 (Ex GST)
OIML F1 Calibration Weight Sets
From AUD 172.50 (Ex GST)
GYROSCOPE ROTATING PLATFORM 390mm
AUD 146.90(Ex GST)
Cone Adapter Straight with Glass Stopcock, BORO 3.3, Laboratory Grade
From AUD 19.50 (Ex GST)
LCD Digital Magnetic Stirrer, up to 5 L Capacity
AUD 408.50(Ex GST)
Simmerstat Hot Plates
From AUD 580.90 (Ex GST)
You May Also Need
Air Track Air Tubes, 2 m and 2.5 m, with End Seals
From AUD 362.50 (Ex GST)
Air Track Photogate Kit, 2 Gates and Cables, Without Timer
AUD 458.90(Ex GST)
Air Track Spark Recording Kits without generator
From AUD 389.50 (Ex GST)
Aluminium Pulleys, 50 mm Diameter, Single, Double and Triple
From AUD 9.90 (Ex GST)
ASEP Powder-Coated Stream Tray
AUD 266.50(Ex GST)
Boyle’s Law Syringe Apparatus
AUD 68.50(Ex GST)
Constant Volume Thermometer for Charles’ Law Experiments
AUD 267.50(Ex GST)
Displacement and Spouting Vessels, Liquid Behaviour Demonstration Range
From AUD 10.90 (Ex GST)
I-Gauge with BeeSpi V for Height, Speed and Impact Experiments
AUD 610.50(Ex GST)
Large Demonstration Manometer, ±300 mm Range
AUD 156.90(Ex GST)
Mini Projectile Launcher for Projectile Motion
AUD 136.90(Ex GST)
Nylon Pulleys for Bench Clamp and Rod Mounting, 50 mm
From AUD 24.50 (Ex GST)
Pendulum bobs high quality
From AUD 3.50 (Ex GST)
Simple Wheel and Axle Pulley Set, Two Sizes Included 150 mm and 75 mm
AUD 89.90(Ex GST)
Steel Ball Set for Physics Classrooms and Teaching Lab, Set of 20 Each
AUD 42.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab