Air Track Glider Soft Collision Attachment
- Special air track glider attachment for soft collision experiments
- Designed for compatible air track glider systems
- Supports selected collision and motion demonstrations
- Useful for special physics experiments involving reduced-impact collisions
- Helps demonstrate collision behaviour, momentum and energy transfer
- Suitable for school, university and teaching laboratory use
- Practical accessory for advanced air track experiment setups
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and timing accessories are not included unless specified separately
- Keep clear of moving gliders during use
- Use under appropriate laboratory or educational supervision
AUD 81.90 (Ex GST)
Air Track Glider Vertical Projectile Attachment
- Special air track glider attachment for vertical projectile experiments
- Designed for compatible air track glider systems
- Supports selected projectile motion demonstrations
- Useful for special physics experiments involving vertical motion
- Helps demonstrate motion, launch behaviour and trajectory concepts
- Suitable for school, university and teaching laboratory use
- Practical accessory for advanced air track experiment setups
- Confirm air track and glider compatibility before ordering
- Attachment only, standard glider may not be included unless specified
- Air track, blower and timers are not included unless specified separately
- Keep clear of moving or launched components during use
- Use under appropriate laboratory or educational supervision
AUD 254.90 (Ex GST)
Air Track Glider Weight and Screw, 200 mm Compensating
- Removable compensating weight and screw for air track gliders
- Designed for old style 200 mm air track glider setups
- Used as replacement hardware for compatible earlier model gliders
- Weight is described as permanent in later model gliders
- Practical spare part for maintaining older air track equipment
- Supports correct glider balance and setup during approved experiments
- Suitable for school, university and teaching laboratory use
- Useful for motion, dynamics and collision experiment maintenance
- Confirm glider model and compatibility before ordering
- Weight and screw only, glider is not included
- Air track and blower are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 11.90 (Ex GST)
Air Track Gliders for Low Friction Motion
- Air track gliders for low-friction linear motion experiments
- Suitable for motion, collision and momentum demonstrations
- Available in 200 mm and 100 mm standard lengths
- 200 mm gliders have a stated weight of 200 g
- 100 mm gliders have a stated weight of 100 g
- Each glider is fitted with weight carrier blocks
- Available in black or gold finishes for easy experiment identification
From AUD 32.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Inclination Blocks, Plastic, Set of 4
- Air track inclination blocks for physics experiments
- Supplied as a set of 4 blocks as listed
- Moulded plastic construction as listed
- Includes 3 mm inclination block
- Includes 6 mm inclination block
- Includes 12 mm inclination block
- Includes 20 mm inclination block
- Designed for raising one end of a compatible air track
- Useful for studying motion on inclined air tracks
- Suitable for school and university physics laboratories
- Confirm air track compatibility before use
- Use under appropriate laboratory or educational supervision
AUD 8.90 (Ex GST)
Air Track Installation & User Manual
- Air track documentation and launcher accessory range for teaching systems
- Supports setup, assembly and operation of compatible air track apparatus
- Manuals are available for 2.0 m and 2.5 m air track versions
- Correct manual selection helps match the installed track length
- Manual trip launcher is listed as a simple air track launching accessory
- Useful for staff handover, maintenance records and experiment preparation
- Suitable for supervised physics laboratory and educational air track use
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Magnet for Glider, Alnico, 50 g
- Magnet accessory for compatible air track gliders
- Alnico magnet as listed
- Designed to fit the glider spine
- Mass listed as 50 g
- Useful for magnetic interaction experiments
- Supports low-friction force and motion demonstrations
- Suitable for collision, attraction and repulsion activities
- Practical spare or replacement accessory for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm glider spine compatibility before ordering
- Magnet only, glider and air track are not included
- Use under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
Air Track Metal Brace for Lateral Feet
- Metal brace for compatible air track support feet
- Designed to reinforce double lateral support feet
- Suitable for later model air track setups
- Helps improve foot support stability during approved use
- Practical spare or replacement part for air track maintenance
- Useful for school, university and teaching laboratory use
- Supports reliable setup for motion and dynamics experiments
- Compatible with approved air track foot assemblies
- Confirm air track model and lateral foot compatibility before ordering
- Metal brace only, lateral feet are not included
- Air track and sub base are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 10.90 (Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
- Non-elastic buffer pair for compatible air track gliders
- Velcro type design supports non-elastic collision demonstrations
- Fits to the end of compatible air track gliders
- Suitable for momentum and collision experiments in physics teaching
- Fits both old and new style air track gliders as specified
- Supplied as a pair for paired glider collision setups
- Designed for supervised laboratory and educational air track use
AUD 12.50 (Ex GST)
Air Track Nylon Pulley for End of Track
- Air track pulley for end-of-track attachment
- Nylon pulley as listed
- Supplied on strip as listed
- Includes flat top attachment screw as listed
- Designed to fix to the end fitting of an air tube
- Useful for air track motion and dynamics experiments
- Supports string, mass and glider motion demonstrations
- Suitable for school and university physics teaching laboratories
- Confirm air track model and end fitting compatibility before ordering
- Pulley accessory only, air track and gliders are not included
- Keep fingers and loose items clear of moving string and pulley
- Use under appropriate laboratory or educational supervision
AUD 20.90 (Ex GST)
Air Track Old Style Brass Glider Weights
- Old style brass weights for compatible air track gliders
- Available in 50 g and 100 g options
- Brass block design for fitting inside the glider spine
- Designed to clamp inside compatible old style gliders
- Used to increase or adjust glider mass during experiments
- Supports motion, momentum and collision demonstrations
- Suitable for school, university and teaching laboratory use
- Practical spare or replacement part for older air track setups
- Confirm old style glider compatibility before ordering
- Weight only, glider and air track are not included
- Check the weight is securely clamped before use
- Use under appropriate laboratory or educational supervision
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Operation Kit for 2 m and 2.5 m Tracks
- Air track operation kit for physics experiments
- Suitable for compatible 2 m and 2.5 m air tracks
- Same operation kit is used for both track lengths
- Includes 2 long gliders and 2 short gliders
- Includes spring buffers and non-spring buffers
- Includes various springs and loop springs
- Includes track pulley, magnets, weights and inclination blocks
- Supplied with instructions
- Designed for performing air track motion experiments
- Included with complete 2.5 m MF0105Z-001 and 2 m MF0107Z-001 air tracks
- Also available separately as a replacement or accessory kit
- Use under appropriate laboratory or educational supervision
AUD 458.90 (Ex GST)
Air Track Photogate Kit, 2 Gates and Cables, Without Timer
- Photogate kit for IEC air track timing experiments
- Contains 2 universal photogates
- Supplied with required cables and plugs for connection to a digital timer
- Digital timer is not included
- Optional IEC Timer LB4064-101 is the recommended timer model
- Compatible with several IEC timer types where suitable
- Special legs allow the gates to engage with a triangular air track
- Gates can be slid along the air track to the required position
- Useful for motion, speed, acceleration and timing experiments
- Suitable for physics classrooms and teaching laboratories
- Confirm timer and air track compatibility before ordering
- Use under appropriate laboratory or educational supervision
AUD 458.90 (Ex GST)
Air Track Plastic Foot for Lateral or Vertical Use
- Moulded plastic foot for compatible new model air tracks
- Designed for lateral or vertical foot positioning
- Suitable for use on compatible air track assemblies
- Also suitable for compatible sub base assemblies
- Practical spare or replacement part for air track maintenance
- Helps support stable air track setup during approved use
- Useful for school, university and teaching laboratory use
- Supports reliable setup for motion and dynamics experiments
- Confirm air track and sub base compatibility before ordering
- Plastic foot only, fixing hardware is not included
- Air track and sub base are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 12.50 (Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
- Replacement Velcro strip pairs for air track glider collision experiments
- Hook and claw strips support non-elastic collision demonstrations
- Each strip size is stated as 20 × 75 mm
- Supplied as 2 pairs for multiple glider setups or spare replacement use
- Helps two moving bodies stick together on impact during collision trials
- Supports momentum discussion and post-collision motion observation
- Suitable for supervised laboratory and educational air track use
AUD 4.90 (Ex GST)
Air Track Spark Generator Cables, Precision Connection Set
- Cable accessory set for air track spark generator and spark recording systems
- Remote control cable includes press button for spark generator start and stop control
- EHV cable pair connects spark tracks to the spark generator
- Earth cable includes 4 mm banana plugs for connection between air track and spark generator
- Supports reliable connection, controlled operation and routine physics demonstration setup
- Replacement cable options help maintain spark recording system performance
- Compatibility with existing spark generator sockets and track hardware should be confirmed before use
From AUD 12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Paper, Motion Recording Roll Black and White
- Spark recording paper rolls for compatible air track timing systems
- Supports dot pattern recording for motion and velocity experiments
- White spark paper roll is stated as 20 mm wide × 180 m long
- Black spark paper roll is stated as 20 mm wide × 10 m long
- White paper is placed over black spark paper during recording
- Spark passage forms black dots on the underside of the white paper
- Suitable for supervised laboratory and educational air track experiments
From AUD 18.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Pen Pair, Left and Right Hand
- Spark pen pair for compatible air track gliders
- Supplied as left hand and right hand pair
- New wire style design as listed
- Designed to fit any compatible air track glider
- Used for spark timing and paper track experiments
- Suitable for motion, velocity and acceleration investigations
- Practical spare or replacement accessory for air track setups
- Useful for school, university and teaching laboratory use
- Confirm spark timer and glider compatibility before ordering
- Spark pens only, glider and air track are not included
- Use only with approved spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
AUD 38.50 (Ex GST)
Air Track Spark Recording Kits without generator
- Spark recording kit for compatible IEC air tracks
- Available for 2 m and 2.5 m air track models
- Supplied without spark generator
- Spark generator required is LC-80-LB0118-001
- Includes special insulated tracks for carrying spark electrodes
- Includes insulated tracks for carrying paper tapes
- Pens fitted to gliders carry sparks to the paper tape
- Supports friction-free air track operation during recording
- Spark marks create black dots on the paper tape
- Dot spacing can be measured to calculate velocity and acceleration
- Suitable for physics motion and mechanics experiments
- Use under appropriate laboratory or educational supervision
From AUD 389.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Track Earth Cable and Screw
- Earth cable accessory for compatible air track spark track setups
- Designed to earth the paper track back to the air track tube
- Suitable for approved spark timing and paper track experiments
- Supplied with flat top screw and nut as listed
- Includes cable and banana plug as listed
- Practical spare or replacement part for air track spark systems
- Useful for school, university and teaching laboratory use
- Supports motion, timing and displacement recording experiments
- Confirm spark track and air track compatibility before ordering
- Earth cable assembly only, spark track and air track are not included
- Use only with approved spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
AUD 13.50 (Ex GST)
Air Track Spark Track EHV Strip Guides
- EHV spark track strip guide for compatible air track systems
- Long plastic strip guide with metal strips as listed
- Available for later model 2.0 m air tracks
- Available for later model 2.5 m air tracks
- Designed for fitting to the side of compatible later model air tracks
- Suitable for approved spark timing and paper track experiments
- Practical spare or replacement part for air track spark systems
- Useful for motion, displacement, velocity and acceleration demonstrations
- Confirm track length and later model compatibility before ordering
- Strip guide only, air track and spark timer are not included
- Use only with approved EHV spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
From AUD 173.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Track Paper Guides
- Paper guide accessory for compatible air track spark track systems
- Long plastic paper guide with metal strip as listed
- Available for later model 2.0 m air tracks
- Available for later model 2.5 m air tracks
- Designed for fitting to the side of compatible later model air tracks
- Supports approved spark timing and paper track recording experiments
- Practical spare or replacement part for air track spark systems
- Useful for motion, displacement, velocity and acceleration demonstrations
- Confirm track length and later model compatibility before ordering
- Paper guide only, air track and spark timer are not included
- Use only with approved spark track equipment and procedures
- Use under appropriate laboratory or educational supervision
From AUD 87.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Stop Block Carrier, Felt Lined
- Felt lined carrier for compatible air track stop block assemblies
- Designed to carry the heavy cast iron stop block
- Suitable for approved air track booster kit setups
- Joins to the stop block using suitable screw and nut hardware
- Practical spare or replacement support component for air track systems
- Helps position the stop block during motion and collision experiments
- Useful for school, university and teaching laboratory use
- Compatible with selected air track stop block arrangements
- Confirm stop block and fixing hardware compatibility before ordering
- Carrier only, stop block is not included unless specified separately
- Screw and nut are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 37.90 (Ex GST)
Air Track Stop Block Screw and Nut for Attachment
- Screw and nut set for compatible air track stop block attachment
- Designed for fixing a heavy cast stop block to a felt lined support
- Suitable for compatible air track stop block assemblies
- Practical spare or replacement hardware for air track maintenance
- Supports approved air track motion and collision experiment setups
- Useful for school, university and teaching laboratory use
- Helps secure the stop block in the correct support position
- Confirm screw, nut and stop block compatibility before ordering
- Screw and nut only, stop block is not included
- Felt lined support is not included unless specified separately
- Check attachment security before operating the air track
- Use under appropriate laboratory or educational supervision
AUD 2.90 (Ex GST)
Air Track Stop Block, Heavy Cast Iron
- Heavy cast iron stop block for compatible air track systems
- Designed as a fixed stop block for air track experiments
- Fits to a compatible felt lined support
- Secured using suitable screw and nut hardware
- Practical spare or replacement component for air track setups
- Supports approved motion, collision and dynamics demonstrations
- Useful for school, university and teaching laboratory use
- Helps provide a defined stop or impact point during selected experiments
- Confirm felt lined support and fixing hardware compatibility before ordering
- Stop block only, screw and nut are not included unless specified separately
- Air track, glider and support accessories are not included
- Use under appropriate laboratory or educational supervision
AUD 51.50 (Ex GST)
Air Track Sub Base Adjusting Stud with Square Head and Knob
- Adjusting stud assembly for compatible later model air tracks
- Used for joining underside of air track to upper side of sub base
- Metal stud construction
- Square plastic head listed
- Blue adjusting nut included as listed
- Helps adjust straightness of the air tube
- Suitable for later model air track and sub base setups
- Practical spare or replacement part for air track maintenance
- Useful for school, university and teaching laboratory use
- Confirm air track and sub base compatibility before ordering
- Stud, square head and knob assembly only, air track is not included
- Use under appropriate laboratory or educational supervision
AUD 7.50 (Ex GST)
Air Track Sub Base Kits, 2 m and 2.5 m
- Optional sub base kits for compatible air track systems
- Available for 2 m and 2.5 m air tracks
- 2 m version is listed as a 10 stud kit
- 2.5 m version is listed as a 12 stud kit
- Supplied complete with assembly kit
- Mounts below the air tube for added support
- Adjustable screws help pull the air tube as straight as possible
- Designed to improve air track alignment and performance
- Feet are removed from the tube and fitted to the sub base
- Commonly used to improve straightness of 2.5 m or longer air tracks
- Suitable for physics classrooms and teaching laboratories
- Use under appropriate laboratory or educational supervision
From AUD 249.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Tape Measure, Fibreglass, 3 m Long
- Tape measure accessory for compatible air track systems
- 3 m long fibreglass tape measure
- Width listed as 16 mm
- Designed to fit the slot in the edge of the air tube
- Can be cut to the required length during installation
- Useful for position, distance and displacement measurements
- Suitable for motion, velocity and acceleration experiments
- Practical spare or replacement scale for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm air tube slot size and required length before ordering
- Tape measure only, air track is not included
- Use under appropriate laboratory or educational supervision
AUD 6.50 (Ex GST)
Air Tracks, 2 m and 2.5 m, Complete with Kits
- Complete air track systems for physics and mechanics experiments
- Available in 2 m and 2.5 m track lengths
- Supplied complete with assembly kit and operation kit
- Designed for low-friction motion demonstrations using air support
- Suitable for velocity, acceleration, momentum and collision experiments
- Optional air blower and hose listed as LC-80-LB0115-002
- Optional photogate kit listed as LC-80-MF0138-001
- Optional electronic timer listed as LC-80-LB4065-101
- Optional sub base and assembly kit available for each track length
- Optional spark recording kit available for each track length
- Optional spark generator and cables listed as LC-80-LB0118-001
- Use under appropriate laboratory or educational supervision
From AUD 896.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air-Cored Copper Solenoid for Magnetic Field Experiments
- Air cored solenoid for laboratory and educational use
- Contains 700 turns of copper wire as listed
- Maximum current listed as about 5 A
- Formed on a strong moulded plastic bobbin
- Size listed as 150 mm long with 37 mm bore
- Suitable for Mass of Electron experiments with a “Magic Eye” tube
- Can be used with IEC Current Balance apparatus
- Can be used for calibrating IEC Hall Effect apparatus
- Useful where a magnetic field of known field strength is required
- Wire terminates to 4 mm socket head terminals
- Terminals point inward so the solenoid ends can sit flat on the table
- Use under appropriate laboratory or educational supervision
AUD 165.90 (Ex GST)
Alcohol Burner Stand, Stainless Steel, 105 x 130 x 70 mm
- Alcohol burner stand for use with compatible alcohol burners
- Made from stainless steel for durable routine laboratory use
- Dimensions are listed as 105 x 130 x 70 mm, L x H x W
- Designed to support simple heating setups in science and laboratory environments
- Stainless steel construction supports easy cleaning and repeated handling
- Compact stand format supports practical bench use during demonstrations
- Suitable for schools, universities, teaching laboratories and general laboratory workflows
- Alcohol burner size, vessel compatibility, heating setup and safety procedure should be confirmed before use
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
- Black insulated alligator clips for laboratory electrical connections
- Shank accepts compatible 4 mm banana plugs as specified
- Pack of 10 supports classroom and laboratory circuit setups
- Insulated shank supports safer handling during supervised practical work
- Suitable for temporary connections in teaching and demonstration circuits
- Useful for physics, electronics and general laboratory electrical activities
- Confirm 4 mm plug compatibility and circuit limits before use
From AUD 15.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.