E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Sub Base Adjusting Stud with Square Head and Knob
AUD 7.50(Ex GST)
AUD 7.50(Ex GST)
- Adjusting stud assembly for compatible later model air tracks
- Used for joining underside of air track to upper side of sub base
- Metal stud construction
- Square plastic head listed
- Blue adjusting nut included as listed
- Helps adjust straightness of the air tube
- Suitable for later model air track and sub base setups
- Practical spare or replacement part for air track maintenance
- Useful for school, university and teaching laboratory use
- Confirm air track and sub base compatibility before ordering
- Stud, square head and knob assembly only, air track is not included
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Track Sub Base Adjusting Stud with Square Head and Knob, also known as an air track sub base straightness adjusting stud, is designed for compatible later model air track systems. This component is used for joining the underside of the later model air track to the upper side of the compatible sub base. The assembly includes a metal stud with square plastic head and blue adjusting nut, supporting controlled adjustment during air track setup and maintenance. Its main function is to help adjust the straightness of the air tube, supporting accurate alignment before approved motion, dynamics and collision experiments.
This spare part is useful for school physics laboratories, university teaching laboratories and STEM programs maintaining air track equipment for classroom demonstrations. Users should confirm the air track model, sub base design, thread fit, adjustment position and installation method before ordering or use. The adjusting stud should be fitted securely before the air track is operated. Do not use if the stud, square head, knob, nut or mating component is damaged, loose or incompatible. Avoid overtightening, as this may damage the plastic head, blue adjusting nut, air track underside, sub base or threaded components.
This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the air track sub base adjusting stud with square head and blue adjusting nut only. Air track, sub base, blower, gliders, timers, photogates, cables and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Sub Base Adjusting Studs and spare parts for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring reliable support hardware for air track alignment and motion experiments.
Calcium Ion Standard Solution, 2.50 mmol/L Calibration Solution
AUD 300.30(Ex GST)
Borosilicate Gas Jars with Ground Flange
From AUD 21.50 (Ex GST)
11-Step Capacitor Set, 100 pF to 0.47 µF, 350 V AC Rated
AUD 184.50(Ex GST)
Precision Needle Tools, Microscopy Preparation and Specimen Handling Range
From AUD 3.50 (Ex GST)
Glass Conical Centrifuge Tubes Non Calliberated, BORO 3.3
From AUD 3.90 (Ex GST)
Ice Box 4°C Thermostatic Cooling Unit with Choice of 1 Optional Block
AUD 1,122.00(Ex GST)
Compact Adjustable Vacuum Pump for Laboratory Filtration
AUD 134.90(Ex GST)
Chattaway Stainless Steel Laboratory Spatula with Straight and Bent Ends, Each
From AUD 4.90 (Ex GST)
PETG Media Bottle with Cap, Non-Sterile
From AUD 419.50 (Ex GST)
Daniell Cell, 125 × 75 mm, with Support and Terminal
AUD 54.90(Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From AUD 7.50 (Ex GST)
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
From AUD 8.50 (Ex GST)
Air Table Pucks, Complete with Weights
From AUD 38.50 (Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Air Track Gliders for Low Friction Motion
From AUD 32.90 (Ex GST)
Air Track Installation & User Manual
From AUD 6.90 (Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
AUD 4.90(Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From AUD 4.90 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Banana Plugs, 4mm
From AUD 5.50 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From AUD 13.50 (Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
AUD 10.90(Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Air Track Magnet for Glider, Alnico, 50 g
AUD 13.90(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Air Track Spark Pen Pair, Left and Right Hand
AUD 38.50(Ex GST)
TOP RATED PRODUCTS
Air Track Magnet for Glider, Alnico, 50 g
AUD 13.90(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Air Track Spark Pen Pair, Left and Right Hand
AUD 38.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab