Air-Cored Copper Solenoid for Magnetic Field Experiments
AUD 165.90(Ex GST)
AUD 165.90(Ex GST)
- Air cored solenoid for laboratory and educational use
- Contains 700 turns of copper wire as listed
- Maximum current listed as about 5 A
- Formed on a strong moulded plastic bobbin
- Size listed as 150 mm long with 37 mm bore
- Suitable for Mass of Electron experiments with a “Magic Eye” tube
- Can be used with IEC Current Balance apparatus
- Can be used for calibrating IEC Hall Effect apparatus
- Useful where a magnetic field of known field strength is required
- Wire terminates to 4 mm socket head terminals
- Terminals point inward so the solenoid ends can sit flat on the table
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Air-Cored Copper Solenoid, also known as a laboratory solenoid coil or air-core magnetic field coil, is designed for physics experiments requiring a controlled magnetic field. This solenoid is formed on a strong moulded plastic bobbin and contains 700 turns of copper wire. It is listed as carrying about 5 A maximum current. The solenoid can be mounted over a compatible “Magic Eye” tube for the Mass of Electron experiment, where the magnetic field is used to deflect or curve the visible electron fan.
It can also be used for making the IEC Current Balance apparatus, calibrating the IEC Hall Effect apparatus, or for other approved classroom experiments where a magnetic field of known field strength is required. The listed size is 150 mm long with a 37 mm bore, allowing users to confirm compatibility with tubes, probes, supports or experiment assemblies before use. The copper wire terminates to 4 mm socket head terminals, which point inward so the ends of the solenoid can sit flat on the table during setup.
Users should confirm current limit, power supply rating, lead compatibility, experiment method, duty cycle and heat build-up before use. Do not exceed the listed current rating or leave the solenoid energised unattended. High current operation may generate heat and should be monitored carefully. Keep magnetic-field-sensitive devices, magnetic storage media and delicate electronic instruments away from the operating solenoid where required.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected air cored solenoid only. Magic Eye tube, power supply, current balance apparatus, Hall Effect apparatus, leads, meters, stands, worksheets, PPE and additional electromagnetism accessories are not included unless specified separately.
LabChoice Australia supplies Air Cored Solenoids and electromagnetism teaching equipment for school science laboratories, university teaching laboratories and educational facilities requiring practical apparatus for magnetic field and electron deflection experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Bottle Top Dispenser with recirculation valve
From AUD 545.50 (Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Save 21%
Receiver Straight Delivery Adapter, Borosilicate Glass (BORO 3.3)
From AUD 9.90 (Ex GST)
3-Way Y-Shaped Glass Connecting Adapter, BORO 3.3
From AUD 40.95 (Ex GST)
Solar Furnace, 305 mm, for Heating Materials Using the Sun
AUD 221.90(Ex GST)
pH Meter Kit PH700-HT for High-Temperature and Caustic Samples, 0 to 14.00 pH
AUD 1,090.00(Ex GST)
Glass Reaction Flask Three Neck with Lid & Clamp, BORO 3.3 Glass
From AUD 322.90 (Ex GST)
You May Also Need
Adjustable Aepinus Air Capacitor for Electrical Experiments
AUD 323.50(Ex GST)
Battery Holders for D Cells with 4 mm Terminals
From AUD 11.50 (Ex GST)
Circuit Board Main Board with 5 mm Metal Pins
AUD 34.90(Ex GST)
Conductivity Tester, 10 Level LED Indicator
AUD 52.50(Ex GST)
Dissectible Transformer Complete Kit with Spot Welder
AUD 1,043.50(Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From AUD 61.50 (Ex GST)
Electronics Trainer Panels, Complete Electronics Study System
From AUD 376.90 (Ex GST)
Electrophorus metal with Handle and Plate
From AUD 52.50 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From AUD 72.50 (Ex GST)
Genecon Due 12 V and Genecon V3 3 V DC Hand Generators
From AUD 72.50 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
AUD 214.50(Ex GST)
Norwood-Style Glass Electrodes, Set of 4, Kit Components
AUD 125.90(Ex GST)
PSSC Small Current Balance Experiment Kit, Solenoid Not Included
AUD 83.50(Ex GST)
Small Motor and Generator Kit with Pulley, ASEP
AUD 72.50(Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
AUD 1,023.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
Electrostatic Rods for Static Electricity Experiments
From AUD 6.40 (Ex GST)
Graphite Carbon Rods for Electrodes and Experiments
From AUD 7.20 (Ex GST)
Tapered Cork Stoppers, Agglomerated Cork for Bottles and Laboratory Vials, Pack of 25
From AUD 6.50 (Ex GST)
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab