LCD Magnetic Hotplate Stirrer Package with 7 Inch Glass Ceramic Plate, Up to 20 L Capacity
- LCD magnetic hotplate stirrer package for laboratory heating and mixing workflows
- 184 × 184 mm, 7 inch glass ceramic work plate
- Maximum stirring quantity listed as 20 L for water
- Speed range from 50 to 1500 rpm in 1 rpm increments
- Heating temperature range from room temperature to 550°C in 1°C increments
- LCD display shows speed, time, set values and real-time values
- Timer range listed from 1 minute to 99 hours 59 minutes
- PT1000 temperature sensor supports ±0.2°C accuracy
- Hot warning flashes above 50°C and continues after power-off
- Package includes support clamp and temperature sensor
AUD 1,326.00 (Ex GST)
LCD Magnetic Hotplate Stirrer Package, 5 Inch Ceramic-Coated Aluminium Plate, up to 20 L Capacity
- LCD magnetic hotplate stirrer package for laboratory heating and mixing workflows
- Ø135 mm, 5 inch ceramic-coated aluminium work plate
- Maximum stirring quantity listed as 20 L for water
- Speed range from 50 to 1500 rpm in 1 rpm increments
- Heating temperature range from room temperature to 340°C in 1°C increments
- LCD display shows speed, time and temperature for clear operation monitoring
- Timer range listed from 1 minute to 99 hours 59 minutes
- PT1000 temperature sensor supports ±0.2°C accuracy
- IP42 protection class with hot warning above 50°C
- Package includes support clamp and temperature sensor
AUD 1,122.00 (Ex GST)
LCD Magnetic Hotplate Stirrer with 4 Inch Glass Ceramic Plate, 10 L Capacity
- LCD magnetic hotplate stirrer for compact laboratory heating and mixing workflows
- 100 × 100 mm, 4 inch glass ceramic work plate
- Maximum stirring quantity listed as 10 L for water
- Speed range from 50 to 1500 rpm in 1 rpm increments
- Heating temperature range from room temperature to 550°C in 1°C increments
- LCD display shows speed, time, set temperature and real-time temperature values
- Timer range listed from 1 minute to 99 hours 59 minutes
- PT1000 external temperature sensor supports ±0.2°C accuracy where used
- Hot warning flashes above 50°C and remains active after power-off
- RS232 data connector supports compatible data or remote-control workflows
AUD 857.00 (Ex GST)
LCD Magnetic Hotplate Stirrer with 7 Inch Glass Ceramic Plate, Up to 20 L Capacity
- LCD magnetic hotplate stirrer for laboratory heating and mixing workflows
- 184 × 184 mm, 7 inch glass ceramic work plate
- Maximum stirring quantity listed as 20 L for water
- Speed range from 50 to 1500 rpm in 1 rpm increments
- Heating temperature range from room temperature to 550°C in 1°C increments
- LCD display shows speed, time, set values and real-time values
- Timer range listed from 1 minute to 99 hours 59 minutes
- PT1000 external temperature sensor supports ±0.2°C accuracy where used
- Hot warning flashes above 50°C and continues after power-off
- Dual safety circuits monitor faults and stop heating if overheating occurs
AUD 1,265.00 (Ex GST)
LCD Magnetic Hotplate Stirrer, 5 Inch Ceramic-Coated Aluminium Plate, up to 20 L Capacity
- LCD magnetic hotplate stirrer for laboratory heating and mixing workflows
- Ø135 mm, 5 inch ceramic-coated aluminium work plate
- Maximum stirring quantity listed as 20 L for water
- Speed range from 50 to 1500 rpm in 1 rpm increments
- Heating temperature range from room temperature to 340°C in 1°C increments
- LCD display shows speed, time and temperature for clear operation monitoring
- Timer range listed from 1 minute to 99 hours 59 minutes
- PT1000 external temperature sensor supports ±0.2°C accuracy where used
- Brushless DC motor supports stable, spark-free stirring operation
- IP42 protection class with hot warning above 50°C
AUD 1,061.00 (Ex GST)
LCD Magnetic Stirrer with Aluminum with ceramic coating Work Plate
- 4/6 channels with independently control of start/stop, speed and display for better parallel experiment control.
- Ceramic coating aluminum work plate with strong resistance to corrosion.
- Spark-free DC brushless motor with extended life and no maintenance
- Compatible with reaction vessels for a variety of application scenario
- Ultra space-saving with 4/6 channel integrated in one instrument
- Safety mechanism, enhancing experimental safety.
From AUD 1,326.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
LCD Multifunctional Linear Decolorizing Shaker with 4-Bar Universal Attachment, 100 to 350 rpm
- Supplied with universal attachment with 4 bars for compatible flask and vessel holding
- Universal attachment size is 32 x 32 cm for use with the shaker work plate
- Flask capacity supports 25 mL x 21, 50 mL x 15, 100 mL x 12, 250 mL x 6 and 500 mL x 4
- Large multifunctional linear decolorizing shaker for controlled laboratory shaking workflows
- Linear reciprocating shaking action supports uniform sample mixing
- Speed range supports 100-350 rpm for adjustable linear shaking
- Maximum load capacity is listed as 7.5 kg with platform
- Linear motion type with 10 mm amplitude supports compatible sample processing applications
- Independent LCD displays show speed and time for clear operation monitoring
- Time setting range supports 1 minute to 19 hours 59 minutes
- Maintenance-free brushless DC motor supports stable routine operation
- Over-speed detection and protection support safer laboratory use
- RS232 data connector supports PC control and data transmission workflows
- Work plate dimension is listed as 320 x 320 mm
- Platform compatibility, flask size, vessel type, load balance and speed setting should be confirmed before use
AUD 1,489.00 (Ex GST)
LCD Multifunctional Orbital Decolorizing Shaker with 3-Bar Universal Attachment, 100 to 800 rpm
- Supplied with universal attachment with 3 bars for compatible flask and vessel holding
- Universal attachment size is 25 x 24.5 cm for use with the shaker work plate
- Flask capacity supports 25 mL x 10, 50 mL x 8, 100 mL x 6, 250 mL x 4 and 500 mL x 2
- Multifunctional orbital decolorizing shaker for controlled laboratory shaking workflows
- Speed range supports 100-800 rpm for smooth and uniform orbital shaking
- Maximum load capacity is listed as 2.5 kg with platform
- Orbital motion type with 4 mm amplitude supports compatible sample mixing and decolorizing workflows
- Independent LCD display shows speed and time during routine operation
- Continuous or timer operation mode supports flexible laboratory workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable long-term operation
- Over-speed detection and protection support safer routine use
- RS232 data connector supports PC control and data transmission
- Free software supports PC control and data logging based on supplied product features
- Platform compatibility, flask size, vessel type, load balance and speed setting should be confirmed before use
AUD 1,387.00 (Ex GST)
LCD Multifunctional Orbital Decolorizing Shaker with 4-Bar Universal Attachment, 100 to 500 rpm
- Supplied with Universal Attachment with 4 bars for compatible flask and vessel holding
- Universal attachment size is 32 x 32 cm for use with the shaker work plate
- Flask capacity supports 25 mL x 21, 50 mL x 15, 100 mL x 12, 250 mL x 6 and 500 mL x 4
- Large multifunctional orbital decolorizing shaker for controlled laboratory shaking workflows
- Speed range supports 100-500 rpm for smooth and uniform orbital shaking
- Maximum load capacity is listed as 7.5 kg with platform
- Orbital motion type with 10 mm amplitude supports compatible sample mixing and decolorizing workflows
- Independent LCD display shows speed and time during routine operation
- Continuous or timer operation mode supports flexible laboratory workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable long-term operation
- Over-speed detection and protection support safer routine use
- RS232 data connector supports PC control and data transmission
- Free software supports PC control and data logging based on supplied product features
- Platform compatibility, flask size, vessel type, load balance and speed setting should be confirmed before use
AUD 1,489.00 (Ex GST)
LCD Orbital Decolorizing Shaker with Fixed Plate, 70 to 400 rpm, up to 3 kg Capacity
- Supplied with fixed plate for compatible routine orbital shaking workflows
- Fixed plate setup supports stable placement of compatible vessels and containers during operation
- Double-screen LCD display shows time and speed separately for clear monitoring
- Orbital decolorizing shaker for smooth and uniform laboratory shaking workflows
- Speed range supports 70-400 rpm for controlled orbital shaking
- Maximum load capacity is listed as 3 kg with platform
- Orbital motion type with 10 mm amplitude supports compatible sample shaking applications
- Continuous or timer operation mode supports flexible workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable routine operation
- Over-speed detection and protection support safer laboratory use
- Compact footprint supports practical placement on laboratory benches
- Work plate dimension is listed as 335 x 335 mm
- Unit dimensions are listed as 420 x 370 x 100 mm, with 9.8 kg weight
- Fixed plate compatibility, vessel type, sample load, speed setting and operating conditions should be confirmed before use
AUD 653.50 (Ex GST)
LCD Rocking Shaker with Non-Slip Dish Platform, 9° Tilt Angle, up to 10 kg Capacity, 10 - 70 rpm
- Supplied with dish platform, non-slip mat and 8 fixed strings for compatible vessel holding
- Dish platform dimension is listed as 30 x 28.5 cm
- See-saw rocking motion with 9° tilt angle supports gentle wave-style sample movement
- multifunctional rocking shaker for controlled laboratory mixing workflows
- Speed range supports 10-70 rpm for low-speed rocking operation
- Maximum load capacity is listed as 10 kg with platform
- Double LCD displays show time and speed independently for clear operation monitoring
- Continuous or timer operation mode supports flexible workflow control
- Electronic time switching range supports 1 minute to 19 hours 59 minutes
- Wide range of compatible platforms supports use with different vessels
- DC motor supports routine rocking operation
- Work plate dimension is listed as 300 x 285 mm
- Unit dimensions are listed as 360 x 410 x 200 mm, with 9 kg weight
- Platform compatibility, vessel type, load balance, speed setting and operating conditions should be confirmed before use
AUD 1,489.00 (Ex GST)
LCD Touch Control Mini Dry Bath with Choice of 1 heating block, up to 100°C
- LCD touch control mini dry bath supplied with a choice of 1 compatible heating block
- Heating temperature range supports 25°C to 100°C for compact dry bath workflows
- Temperature setting range listed as room temperature +5°C to 100°C
- Temperature control accuracy specified as ±0.5°C with 0.1°C display accuracy
- Timer range supports 0 to 999 minutes or 0 to 999 seconds
- Heating from 25°C to 100°C is listed as ≤20 minutes
- Includes user recalibration, USB interface support, error code display and 9 program memory
AUD 592.50 (Ex GST)
LDPE Dropping Bottle, Lab Dropwise Dispensing Bottle with Screw Cap
- LDPE plastic dropping bottles designed for controlled liquid dispensing in laboratories
- Available in five capacities: 15 mL, 30 mL, 60 mL, 125 mL and 250 mL
- Manufactured from flexible low-density polyethylene (LDPE)
- Designed to dispense small, uniform drops of compatible liquids
- Screw cap with attached cover for convenient opening and closing
- Squeezable bottle construction allows manual control of liquid dispensing
- Lightweight plastic design suitable for routine laboratory handling
- Suitable for storing and dispensing compatible laboratory solutions
- Reusable construction when properly cleaned and maintained
- 60 mL variation features a 24/410 screw thread
- 60 mL bottle measures 80 mm in overall height with the cap fitted
- Ideal for chemistry, research, educational and industrial laboratories
From AUD 2.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lead Acetate Indicator Paper Strips, Vial of 100
- Lead acetate test paper for detecting hydrogen sulfide
- Supplied in vial of 100 strips
- Detects hydrogen sulfide in water as low as 5 ppm as listed
- White paper begins turning grey at approximately 1–3 ppm as listed
- Colour darkens as concentration increases up to 400 ppm
- Can be dipped directly into water samples for a few seconds
- Can also be moistened with distilled water for hydrogen sulfide gas detection
- Acetate buffer is not required as listed
- Does not cross-react with thiols, thioketones or mercaptans as listed
- Suitable for laboratory, educational and water screening demonstrations
- Contains lead acetate, handle and dispose of as hazardous material
- Use only under appropriate laboratory or educational supervision
AUD 13.90 (Ex GST)
LED 3D Shaker with Fixed Plate, 10° Tilt Angle, 10-80 rpm
- Fixed plate with anti-slip silicone disc surface supports stable sample placement
- Gentle 3D motion with fixed 10° tilt angle supports uniform shaking and mixing
- LED 3D shaker for flasks, culture flasks, Petri dishes and tubes
- Speed range supports 10-80 rpm for adjustable rotational mixing
- Maximum load capacity is listed as 2 kg with platform
- Independent LED displays show time and speed for clear operation monitoring
- Time setting range supports 1 minute to 99 hours 59 minutes
- Brushless DC motor supports stable routine operation
- Incubator compatible, subject to size, temperature, humidity and operating condition confirmation
- Suitable for cell culture workflows, DNA extraction, cell distribution and gel staining or destaining
- Work plate dimension is listed as 268 x 268 mm
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.7 kg weight
- Vessel type, load balance, incubator suitability, speed setting and operating conditions should be confirmed before use
AUD 286.50 (Ex GST)
LED Constant Temperature Glass Bath with Separate Controller up to 25–240°C
- LED Constant temperature glass bath for controlled heating of laboratory liquids, samples and reaction vessels
- Heating temperature range supports 25°C to 240°C for compatible laboratory workflows
- Transparent glass bath supports easy observation of reactants and sample condition during heating
- Intelligent PID temperature control supports uniform and rapid heating performance
- Temperature control accuracy of heated liquids is listed as ±0.5°C
- Temperature display accuracy is listed as 0.1°C with LED temperature display
- PT1000 external temperature sensor supports accurate liquid temperature monitoring
- Remote controller operation supports safer use up to 1 m cable distance from the main unit
- Safety guard design helps prevent direct contact with the heating tube and supports stable vessel placement
- Over-temperature protection stops heating if overheating or sensor malfunction occurs
- Overcurrent protection and grounding fault protection support safer laboratory operation
- Temperature calibration and factory reset functions are included based on supplied features
- Optional magnetic stirrer can improve temperature uniformity within the bath
- Suitability, vessel size, liquid type, temperature setting and operating conditions should be confirmed before use
AUD 633.50 (Ex GST)
LED Digital Double Module Dry Bath with Choice of 2 Heating Blocks, up to 105°C
- Double-module dry bath supplied with a choice of 2 compatible heating blocks
- Temperature control range from room temperature +5°C to 105°C
- Temperature setting range listed as 25°C to 105°C
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 105°C
- Temperature uniformity listed as ±0.2°C at 37°C
- Timer range supports 0 minutes to 99 hours 59 minutes
- Includes external temperature sensor, overheating protection and sound reminder function
AUD 1,041.00 (Ex GST)
LED Digital Double Module Dry Bath with Choice of 2 Heating Blocks, up to 150°C
- Double-module dry bath supplied with a choice of 2 compatible heating blocks for flexible sample handling
- Temperature control range from room temperature +5°C to 150°C for higher-temperature dry heating workflows
- Temperature setting range listed as 25°C to 150°C with precise digital adjustment capability
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 150°C for reliable performance
- Temperature uniformity listed as ±0.2°C at 37°C to support consistent sample heating conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for both short and extended procedures
- Includes external sensor, overheating protection and sound reminder function for safer routine operation
AUD 1,143.00 (Ex GST)
LED Digital Dry Bath with Choice of 1 Heating Block, up to 120°C
- LED digital dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Temperature control range from room temperature +5°C to 120°C for routine dry heating workflows
- Temperature setting range listed as 25°C to 120°C with clear digital temperature control
- Temperature control accuracy specified as ±0.5°C for reliable laboratory heating performance
- Temperature uniformity listed as ±0.5°C at 37°C to support consistent sample conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for short and extended procedures
- Includes overheating protection, lid support and optional compatible heating block formats
AUD 633.50 (Ex GST)
LED Digital Dry Bath with Fixed Block, up to 60°C
- Fixed dual-purpose heating block supports 5 mL x 30 and 10 mL x 8 tube positions
- Discrete heating temperature levels support 25°C, 30°C, 37°C, 45°C and 60°C operation
- Low-profile, space-saving design supports routine laboratory bench use
- LED digital dry bath for controlled fixed-block sample heating workflows
- Temperature control range supports room temperature +5°C to 60°C
- Temperature setting range includes 5 gears: 25°C, 30°C, 37°C, 45°C and 60°C
- Temperature control accuracy is specified as ±0.5°C
- Temperature display accuracy is listed as 0.1°C for clear monitoring
- Temperature uniformity at 37°C is specified as ±0.3°C
- Time setting range supports 0 minutes to 99 hours 59 minutes
- Timer function support is available for routine heating workflows
- LED display supports easy temperature and operation monitoring
- Fixed block format helps avoid separate block selection for compatible 5 mL and 10 mL tube workflows
- Tube compatibility, sample vessel size, temperature setting and operating conditions should be confirmed before use
AUD 428.50 (Ex GST)
LED Digital Dry Bath with Single Point Callibration with Choice of 1 Heating Block, up to 120°C
- LED digital dry bath supplied with a choice of 1 compatible heating block
- Single point calibration configuration supports routine temperature verification workflows
- Temperature range from room temperature +5°C to 120°C
- Temperature setting range listed as 25°C to 120°C
- Temperature control accuracy specified as ±0.5°C
- Timer range supports 0 minutes to 99 hours 59 minutes
- Includes overheating protection, fitted lid and 0.1°C display accuracy
AUD 735.50 (Ex GST)
LED Digital Glass Ceramic Hotplate, 7 Inch, Heating Temperature up to 550°C
- 7-inch glass ceramic work plate supports efficient heat transfer and chemical-resistant performance
- Heating temperature range from room temperature to 550°C in 5°C increments
- LED display shows actual temperature for clear routine monitoring
- PT1000 external temperature control supports sample monitoring with ±0.2°C sensor accuracy
- Separate safety circuit provides overheating protection at 580°C
- HOT warning flashes when the work plate temperature is above 50°C
- Compact single-position hotplate suitable for digestion, drying, concentration and sample pre-treatment
AUD 775.50 (Ex GST)
LED Digital Magnetic Stirrer, 5 Inch, up to 3 L Capacity
- Digital speed control from 0 to 1500 rpm supports controlled laboratory stirring.
- Maximum stirring quantity supports up to 3 L H₂O for routine solution mixing.
- LED display shows stirring speed clearly for easy operation and monitoring.
- Compact design suits routine laboratory, school and education science use.
- Suitable for mixing samples, solutions, reagents and general laboratory liquids.
- Practical magnetic stirring option for the LabChoice Australia equipment range.
AUD 245.50 (Ex GST)
LED Digital Single Module Dry Bath with Choice of 1 Heating Block, up to 105°C
- Single-module dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Temperature control range from room temperature +5°C to 105°C for a wide range of heating applications
- Temperature setting range listed as 20°C to 105°C with precise digital adjustment capability
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 105°C for reliable performance
- Temperature uniformity listed as ±0.2°C at 37°C to support consistent sample heating conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for both short and extended procedures
- Includes USB interface, external sensor, overheating protection and sound reminder function for enhanced usability and safety
AUD 633.50 (Ex GST)
LED Digital Single Module Dry Bath with Choice of 1 Heating Block, up to 150°C
- Single-module dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Temperature control range from room temperature +5°C to 150°C for higher-temperature dry heating workflows
- Temperature setting range listed as 25°C to 150°C with precise digital adjustment capability
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 150°C for reliable performance
- Temperature uniformity listed as ±0.2°C at 37°C to support consistent sample heating conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for both short and extended procedures
- Includes external sensor, overheating protection and sound reminder function for safer routine operation
AUD 775.50 (Ex GST)
LED Linear Decolorizing Shaker with Fixed Plate up to 2 kg, 40-200 rpm
- Supplied with fixed plate for compatible linear shaking workflows
- Linear motion with 20 mm amplitude supports uniform sample mixing
- Independent LED displays show speed and time for easier operation control
- Speed range supports 40-200 rpm for adjustable low-speed shaking
- Maximum load capacity is listed as 2 kg with platform
- Suitable for mixing in culture dishes, flasks and beakers
- Ideal for aeration and extraction applications
- Can be used in environmental chambers and CO2 incubators, subject to compatibility confirmation
- Continuous or timer operation mode supports flexible experiment control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports extended service life
- Safety speed protection helps support safer routine operation
- Work plate dimension is listed as 268 x 268 mm
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.4 kg weight
- Fixed plate compatibility, vessel type, load balance, chamber suitability and speed setting should be confirmed before use
AUD 286.50 (Ex GST)
LED Magnetic Hotplate Stirrer Package, 5L Capacity
- LED display shows real-time temperature and stirring speed clearly.
- Adjustable heating temperature up to 280°C for routine lab work.
- Stable stirring performance supports uniform solution mixing.
- Dual temperature sensors monitor plate and solution temperature.
- “HOT” warning flashes above 50°C, even after power-off.
- Ceramic-coated heating plate resists corrosion, wear and heat.
AUD 551.00 (Ex GST)
LED Magnetic Hotplate Stirrer with Package, 7 Inch Glass Ceramic Plate, up to 10 L Capacity
- LED magnetic hotplate stirrer package for heating and stirring workflows
- 184 × 184 mm, 7 inch glass ceramic work plate
- Maximum stirring quantity listed as 10 L for water
- Speed range from 0 to 1500 rpm with scale speed display
- Heating temperature range from room temperature to 550°C in 5°C increments
- LED temperature display shows actual temperature during operation
- PT1000 external temperature sensor supports ±0.2°C accuracy
- Hot warning activates at 50°C with overheating protection at 580°C
- Maximum magnetic stir bar length listed as 80 mm
- Package includes support clamp
AUD 940.00 (Ex GST)
LED Magnetic Hotplate Stirrer, 7 Inch Glass Ceramic Plate, up to 10 L Capacity
- 7-inch glass ceramic work plate supports chemical-resistant heating and easy cleaning
- Stirring capacity up to 10 L of water supports routine laboratory mixing workflows
- Heating temperature range from room temperature to 550°C in 5°C increments
- Stirring speed range from 0 to 1500 rpm supports controlled magnetic stirring
- LED temperature display and scale speed control support simple daily operation
- PT1000 external temperature sensor supports sample monitoring with ±0.2°C sensor accuracy
- HOT warning, PID control and 580°C overheating protection support safer heating operation
AUD 858.00 (Ex GST)
LED Multifunctional Orbital Decolorizing Shaker with Dish Attachment non slip mat, up to 2Kg, 40 to 200 rpm
- Supplied with dish attachment, non-slip mat and replaceable tray for compatible shaking workflows
- Dish attachment dimension is listed as 24 x 21.5 cm
- Non-slip mat supports more stable placement of compatible dishes and vessels during operation
- Replaceable tray supports practical setup changes for suitable laboratory applications
- Multifunctional decolorizing shaker for smooth and uniform laboratory shaking workflows
- Speed range supports 40-200 rpm for controlled low-speed orbital shaking
- Maximum load capacity is listed as 2 kg with platform
- Orbital motion type with 20 mm amplitude supports gentle shaking and decolorizing applications
- Double-screen LED display shows time and speed separately for clear operation monitoring
- Continuous or timer operation mode supports flexible workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable routine operation
- Over-speed detection and protection support safer laboratory use
- Interchangeable plates support diverse laboratory applications
- Work plate dimension is listed as 268 x 268 mm with double-layer format
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.1 kg weight
- Dish size, vessel type, tray fit, load balance and speed setting should be confirmed before use
AUD 428.50 (Ex GST)
LED Orbital Destaining Shaker with Remote Control, up to 2 kg Capacity, 40 to 200 rpm
- Remote-controlled decolorizing shaker with wireless module for flexible laboratory operation
- Dual-mode connection supports wireless and wired operation for different laboratory scenarios
- Remote control range is listed as over 10 m in unobstructed conditions
- Orbital shaker motion supports controlled shaking for compatible laboratory workflows
- Speed range supports 40-200 rpm for gentle and consistent sample movement
- LED display shows real-time speed and time during operation
- Timer setting range supports 1 minute to 99 hours 59 minutes
- 20 mm amplitude supports orbital shaking for compatible vessels and sample platforms
- Maximum load capacity is listed as 2 kg with platform
- Magnetic remote-control design allows attachment to metal surfaces for easier access and storage
- Type-C charging supports convenient charging of the remote-control system
- Safety RPM protection function supports safer routine operation
- DC brushless motor supports stable operation with 20 W total power rating
- Suitable for sterile, low temperature, enclosed, anaerobic or hazardous sample processing workflows
- Platform compatibility, vessel type, sample load, speed setting and operating environment should be confirmed before use
AUD 449.50 (Ex GST)
LED Transference Decolorizing Shaker, 7° Tilt Angle, 10 to 80 rpm
- Fixed work plate supports compatible routine rocking and decolorizing workflows
- See-saw wave rocking motion with 7° tilt angle supports gentle sample movement
- Intelligent rocking decolorizing shaker for compact laboratory mixing workflows
- Speed range supports 10-80 rpm for controlled low-speed rocking operation
- Maximum load capacity is listed as 2 kg with platform
- Double LED displays show time and speed independently for clear monitoring
- Continuous or timer operation mode supports flexible experiment control
- Electronic time switching range supports 1 minute to 99 hours 59 minutes
- Fixed work plate dimension is listed as 268 x 268 mm
- Simple compact appearance helps save operating bench space
- DC motor supports routine rocking operation
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.1 kg weight
- Platform compatibility, vessel type, sample load, speed setting and operating conditions should be confirmed before use
AUD 286.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.