LED Digital Glass Ceramic Hotplate, 7 Inch, Heating Temperature up to 550°C
$775.50(Ex GST)
- 7-inch glass ceramic work plate supports efficient heat transfer and chemical-resistant performance
- Heating temperature range from room temperature to 550°C in 5°C increments
- LED display shows actual temperature for clear routine monitoring
- PT1000 external temperature control supports sample monitoring with ±0.2°C sensor accuracy
- Separate safety circuit provides overheating protection at 580°C
- HOT warning flashes when the work plate temperature is above 50°C
- Compact single-position hotplate suitable for digestion, drying, concentration and sample pre-treatment
- Description
Description
The LED Digital Glass Ceramic Hotplate, also known as a high-temperature laboratory heating plate, is designed for controlled heating in mineral processing, metallurgy, environmental testing, petrochemical research, functional materials development, battery materials research, analytical testing and university research laboratories.
The 7-inch glass ceramic work plate measures 184 × 184 mm and provides excellent chemical-resistant performance with efficient heat transfer. This makes the hotplate suitable for high-temperature workflows using compatible laboratory vessels and validated heating procedures.
The heating temperature range extends from room temperature to 550°C, adjustable in 5°C increments. Temperature control accuracy is specified at ±10°C, while temperature display accuracy is ±1°C, supporting routine laboratory heating where a durable high-temperature benchtop hotplate is required.
External temperature control is possible by connecting a PT1000 temperature sensor, with stated sensor accuracy of ±0.2°C. This allows closer monitoring of sample or vessel temperature when the laboratory method requires external temperature feedback during heating.
The LED display shows the actual operating temperature clearly during use. The single heating position supports focused heating for sample digestion, solvent removal, sample drying, concentration and analytical pre-treatment procedures.
Safety features include separate safety circuits with overheating temperature protection at 580°C. The HOT warning flashes when the work plate temperature is above 50°C, helping users identify residual heat after operation and supporting safer handling around the hotplate.
Typical applications include high-boiling acid digestion of minerals, preparation of nanomaterials and inorganic materials, sample ashing and sintering of metal catalysts, rapid removal of high-boiling solvents, sample drying, sample concentration and pre-treatment of environmental water, soil and pollutant samples.
LabChoice Australia supplies this LED Digital Glass Ceramic Hotplate for R&D laboratories in mineral processing and metallurgical production, environmental monitoring stations testing heavy metal pollutants in soil and water, university petrochemical and functional materials laboratories, battery electrode materials laboratories, analytical testing laboratories and industrial quality-control facilities.
| Specification | Details |
|---|---|
| Work plate Dimension | 184×184 mm (7 inch) |
| Work plate material | Glass ceramic |
| Heating temperature range | Room Temp.-550℃, increment 5℃ |
| Temperature display | LED |
| Temperature control accuracy | ±10℃LED |
| Temperature display accuracy | ±1℃ |
| External temperature sensor | PT1000 (accuracy±0.2℃) |
| “Hot” warning | 50℃ |
| Overheating temperature protection | 580℃ |
| Heating position | 1 |
| Protection class | IP21 |
| Power | 1010 W |
| Heating output | 1000 W |
| Voltage, Frequency | 100-120V/200-240V，50/60Hz |
| Dimension [WxDxH] | 215x360x112 mm |
| Weight | 4.5 kg |
| Permissible ambient temperature | 5-40℃ |
Frequently Bought Together
LED Magnetic Hotplate Stirrer Package, 5L Capacity
$650.00(Ex GST)
LCD Magnetic Hotplate Stirrer Package with 4 Inch Glass Ceramic Plate, 10 L Capacity
Magnetic Stirrer Hotplate IKA C-Mag HS10, up to 15 L Capacity
$2,894.00(Ex GST)
Bottle Top Dispenser with recirculation valve
From $545.50 (Ex GST)
PETG Erlenmeyer Flask Flat Bottom, Sterile
From $76.50 (Ex GST)
Polypropylene and PTFE Stopcocks, 2 Way and 3 Way Tubing Type
From $18.90 (Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Nitrate & Nitrite Test Paper Strips, 50 Strip Pack
$83.50(Ex GST)
Safety Clamp for Gas Syringe, 100 ML
$61.50(Ex GST)
Blue Nitrile Gloves, Powder Free - Small, Medium, Large Size
From $9.90 (Ex GST)
Similar Products
Block for Cuvettes
$392.00(Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Flat Block for Vials
$254.00(Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Mini Roller Mixers, Standard Tube and Bottle Laboratory Type
From $2,070.00 (Ex GST)
Orbital Shaking Incubator
From $6,639.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $835.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab