LED Digital Dry Bath with Single Point Callibration with Choice of 1 Heating Block, up to 120°C
- LED digital dry bath supplied with a choice of 1 compatible heating block
- Single point calibration configuration supports routine temperature verification workflows
- Temperature range from room temperature +5°C to 120°C
- Temperature setting range listed as 25°C to 120°C
- Temperature control accuracy specified as ±0.5°C
- Timer range supports 0 minutes to 99 hours 59 minutes
- Includes overheating protection, fitted lid and 0.1°C display accuracy
[request_quote_button]
- Description
Description
The LED Digital Dry Bath with Single Point Calibration and Choice of 1 Heating Block, also known as a calibrated digital dry bath incubator, is designed for controlled dry heating of compatible laboratory samples, tubes and vessels in routine temperature-controlled workflows.
This dry bath supports block-based heating where 1 compatible heating block can be selected according to the required tube size, vessel format and sample preparation method. It is suitable for routine dry heating, incubation-style holding and controlled laboratory processing up to 120°C. The temperature range is listed as room temperature +5°C to 120°C, with a supplied temperature setting range of 25°C to 120°C. The unit provides temperature control accuracy of ±0.5°C, supporting reliable heating performance for compatible laboratory applications.
The temperature display accuracy is stated as 0.1°C, allowing clear monitoring of set and operating conditions. Temperature uniformity at 37°C is specified as ±0.5°C, supporting consistent heating performance across compatible heating block applications. The time setting range supports 0 minutes to 99 hours 59 minutes, making the unit suitable for short heating steps as well as extended temperature-hold procedures. The LED display provides clear temperature visibility for routine laboratory operation. The single point calibration configuration supports laboratories that require routine temperature verification for compatible dry bath workflows. Users should follow the supplied operating instructions and confirm whether additional calibration documentation is required for their internal quality system.
The unit includes overheating protection to support safer supervised use. The fitted lid helps protect the heating area, supports heat preservation and helps reduce contamination risk during suitable workflows. This product is supplied with 1 compatible heating block. Optional heating blocks are available for different compatible tube and sample formats, allowing users to configure the dry bath for specific heating requirements. The supplied specifications list 160 W power, LED display, 110/220 V, 50/60 Hz voltage/frequency, 175 × 290 × 85 mm dimensions and 3 kg weight. The external sensor field is listed as not included. Permissible ambient operating conditions are stated as 10 to 40°C and below 80% RH.
LabChoice Australia supplies the LED Digital Dry Bath with Single Point Calibration and Choice of 1 Heating Block for school laboratories, university teaching spaces, research laboratories, QC laboratories, clinical teaching environments and routine sample preparation workspaces requiring controlled dry heating, timed operation and flexible block-based sample handling.
| Specification | Details |
|---|---|
| Temperature Setting range | 25-120℃ |
| Temperature display accuracy | 0.1℃ |
| Time setting range | 0min~99h59min |
| Power | 160 W |
| Voltage/Frequency | 110/220V,50/60HZ |
| Weight | 3 kg |
| Temperature range | Room temp +5-120℃ |
| Temperature control accuracy | ±0.5℃ |
| Temperature uniformity@37℃ | ±0.5℃ |
| Display | LED |
| Dimension [WxDxH] | 175X290X85 mm |
| Permissible ambient temperature | 10-40℃ |
Calcium Ion Standard Solution, 2.50 mmol/L Calibration Solution
$300.30(Ex GST)
Kjeldahl Digestion Flask Jointed BORO 3.3 Glass
From $16.50 (Ex GST)
Laboratory Draining and Drying Racks, Bench and Wall Mount Type
From $56.50 (Ex GST)
Amber Glass Vacuum Desiccator with Lid
From $554.90 (Ex GST)
ASEP Small Motor and Generator Kit with Pulley Included
$72.50(Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Unglazed Laboratory Porcelain Mortar and Pestle
From $5.90 (Ex GST)
Tensile Testing Machine for Strength of Materials Experiments
$389.50(Ex GST)
You May Also Need
Digital Dry Block Heater, Four Block, 200°C
$1,844.00(Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Mini Magnetic Stirrer, 1L and 2L Capacity , Brushless Motor
From $99.90 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
