pH/Temp Electrode for Strong Alkaline and High-Salinity Solutions, Non-Refillable, 0–14 pH
- Non-refillable pH / temperature electrode for strong alkaline and high-salinity solution testing
- Designed for strong alkalis from pH 10–14 and high salinity solutions above 5000 ppm
- HA-type glass membrane helps minimise alkaline error in demanding high-pH samples
- Open junction and polymer electrolyte support full sample contact while reducing junction clogging
- Silver Ion Trap reference system helps maintain reference potential stability in an Ag⁺-free environment
- Built-in temperature sensor supports automatic temperature compensation on compatible meters
AUD 360.00 (Ex GST)
pH/Temp Electrode for Viscous Liquids, Non-Refillable, 0–14 pH
- Non-refillable pH / temperature electrode for viscous liquid measurement workflows
- Suitable for cosmetics, skin care products, paints, coatings, glues, slurry, honey and liquid resin samples
- Pre-pressurised electrolyte supports smoother electrolyte discharge and quicker response
- HA membrane helps minimise alkaline error and supports use in higher-temperature sample conditions
- Silver Ion Trap reference system helps maintain stable reference potential in an Ag⁺-free environment
- Built-in temperature sensor supports automatic temperature compensation on compatible meters
AUD 385.00 (Ex GST)
pH/Temp Electrode for Wastewater, Suspensions and Dirty Liquids, Non-Refillable, 0–13 pH
- pH / temperature electrode for wastewater, suspensions, emulsions, slurries and dirty liquid testing workflows
- Designed for challenging liquid samples where particles, residues or mixed phases may affect standard electrode performance
- Open junction and polymer electrolyte help reduce junction clogging during dirty liquid measurement
- Long-Life Reference System supports stable reference potential and longer electrode service life
- Blue gel inner electrolyte helps reduce air-bubble-related jumping readings inside the sensor
- Built-in temperature sensor supports automatic temperature compensation on compatible meters
AUD 220.00 (Ex GST)
Phenolphthalein Test Paper, 100 Strips for Ammonia Detection
- 100 phenolphthalein test strips for qualitative ammonia detection.
- Suitable for testing ammonia vapours and water-based solutions.
- Detects ammonia in aqueous solutions at approximately 3–5 ppm.
- Paper changes pinkish when ammonia is present.
- Useful for checking suspected refrigeration or air-conditioning leaks.
- Position strips near suspected vapour sources for testing.
- Test samples must be water-based for solution detection.
- Suitable for laboratories, education and general ammonia screening.
- Provides a simple, rapid visual indication without complex equipment.
AUD 9.90 (Ex GST)
Photoelectric Cell Base with Terminals and 90CG Tube
- Photoelectric cell mounted on a base for laboratory demonstrations
- Supplied with 90CG gas-filled photocell tube as specified
- Terminals support connection to a compatible power source
- Sensitive in the visible region from red to blue light
- Phototube cathode is coated with caesium and antimony on silver oxide
- Suitable for photoelectric effect teaching with compatible apparatus
- For supervised laboratory and educational use only
AUD 178.50 (Ex GST)
Photoelectric Effect Apparatus with Digital Meters and 5 LEDs
- Photoelectric effect apparatus for Planck’s constant demonstrations
- Supplied with two separate digital meters for clearer experiment readings
- Current meter displays photo tube current in 0.1 nanoamp resolution
- Voltage meter displays backing voltage required to reduce current to zero
- Five LED light sources are selectable from the front panel
- White light and filter method can also be used with separate accessories
- Powered by 12 V AC/DC plug pack or school power supply, not supplied
AUD 893.50 (Ex GST)
Photoelectric Effect Apparatus with Digital Meters, Lamp and Filters
- Photoelectric effect apparatus for Planck’s constant demonstrations
- Supplied with two separate digital meters for clearer experiment readings
- Current meter displays photo tube current in 0.1 nanoamp resolution
- Voltage meter displays backing voltage required to reduce current to zero
- Dual display design avoids switching between current and voltage readings
- Uses white light source with colour filters for traditional wavelength selection
- Photo tube cathode is coated with caesium and antimony on silver oxide
AUD 884.50 (Ex GST)
Pipette Box, Polystyrene, for Adjustable Pipette Storage
- Pipette box for laboratory pipette storage and protection
- Designed to hold pipettes of different lengths
- Material listed as Polystyrene
- Brand listed as Polylab
- Strong outer shell helps protect pipettes during storage
- Screw-type adjustable height design as listed
- Top screws onto the bottom section for secure closure
- Height can be adjusted by screwing or unscrewing the top
- Helps keep pipettes fixed in place during storage
- Suitable for liquid handling laboratories and teaching environments
- Pipette box only, pipettes are not included
- Use under appropriate laboratory or educational supervision
AUD 19.90 (Ex GST)
Pipette Cleaning Brush with Tinned Wire Handle, 440mm
- Pipette cleaning brush for laboratory glassware cleaning
- Designed for cleaning pipettes and narrow glass tubes
- Tapered bristle section supports access through narrow openings
- Bristle size listed as 190 mm long × 7 to 20 mm diameter
- Overall length listed as 440 mm
- Black bristles
- Tinned wire handle for controlled manual cleaning
- Suitable for routine laboratory washing applications
- Useful for school, university and general laboratory use
- Confirm pipette bore and brush suitability before use
- Avoid excessive force when cleaning delicate glassware
- Use under appropriate laboratory or educational supervision
AUD 12.50 (Ex GST)
Pipette Filler Bulb Rubber, 3 Valve Type, Precision Lab Pipetting Accessory
- Three-valve system for precise liquid control
- Rubber body provides flexibility and durability
- Supports safe, hands-free pipetting operation
- Compatible with glass and plastic pipettes
- Used in research, clinical, and teaching labs
- Supplied by LabChoice Australia – High performance
From AUD 12.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pith Ball Electroscope for Electrostatics Demonstration
- Pith ball type electroscope for physics education
- Demonstrates basic principles of electrostatics
- Helps show charge attraction and repulsion behaviour
- Suitable for classroom demonstrations and student practicals
- Supports teaching of static charge and electrical interaction
- Useful with suitable electrostatic rods or charge sources
- Intended for supervised educational laboratory use
AUD 6.90 (Ex GST)
Plain Desiccator, All-Clear Polycarbonate, High Quality
- Plain all-clear desiccator for laboratory sample storage
- Made from PC / PC polycarbonate construction as listed
- Transparent design allows easy viewing of contents
- Designed to help protect moisture-sensitive materials
- Suitable for compatible chemicals, samples and hygroscopic materials
- Available in 150 mm, 200 mm, 250 mm, 300 mm and 380 mm sizes
- Plain design for straightforward laboratory use
- Useful for laboratory, industrial and educational applications
- Helps reduce unnecessary opening during sample monitoring
- Desiccant should be selected separately to suit the application
- Not a vacuum desiccator unless specified
- Use under appropriate laboratory or educational supervision
From AUD 125.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Plain/Double Block (No Holes)
- Double plain block with no holes for unused block positions in heaters
- Helps minimise heat loss through empty wells when blocks are not in use
- Supports even temperature maintenance throughout the block heater system
- Smooth work surface is ideal for microscope slides and small staining use
- Suitable for warming plates, dishes and other flat-bottomed vessels
- W150 x D95 x H50 mm block with chemical-resistant black anodised finish
From AUD 121.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Plastic Coated Wire Bottle Carrier for Laboratory Bottle Handling
- Bottle carrier for holding 2 × 2.5 L Winchester bottles
- Designed for 2500 mL Winchester bottles as listed
- Plastic coated wire construction
- Epoxy coated finish as listed
- Holds two bottles in separate side compartments
- Overall dimensions listed as 345 × 185 × 185 mm high
- Handle length listed as 215 mm
- Internal size of each side listed as 170 × 170 mm
- Useful for carrying compatible laboratory reagent bottles
- Suitable for school, university and teaching laboratory use
- Confirm bottle diameter, load weight and chemical compatibility before use
- Use under appropriate laboratory or educational supervision
AUD 69.90 (Ex GST)
Plastic Refraction Tanks, Clear and Printed Angle Options
- Semicircular plastic refraction tank range for optics experiments
- Used for observing refraction through different liquids
- Suitable for demonstrating total internal reflection
- Clear plastic option listed as 12 cm diameter × 3 cm deep
- Printed angle option includes a protractor-style scale on the base
- Degree markings along the curved edge assist angle measurement
- Supports Snell’s Law activities and refractive index investigation
- Useful for locating object and image positions in refraction studies
- Suitable for school physics, optics and general science teaching
- Use under appropriate laboratory or teacher supervision
From AUD 16.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Plastic Scale Pan with Hook, 100 mm Nylon
- One-piece plastic scale pan for laboratory and educational use
- Designed for use in mass, force and balance activities
- Includes integrated hook formed from the moulded side sections
- No cords or separate hook components required
- Helps reduce loose parts that may be lost or broken
- Black nylon construction listed in supplied description
- Scale pan depth listed as 12 mm
- Title lists 75 mm diameter, while supplied IEC description refers to 100 mm diameter
- Suitable for use with compatible balances, hangers and force apparatus
- Practical low-cost accessory for physics and general science experiments
- Confirm final pan diameter and apparatus compatibility before ordering
- Use under appropriate laboratory or educational supervision
AUD 7.90 (Ex GST)
Plastic Spectroscope with Calibration Scale and Adjustable Slit
- Compact direct vision spectroscope for laboratory and educational use
- Plastic spectroscope body as listed
- Adjustable slit controls light entry into the chamber
- Viewing eyepiece carries a 600 line/mm grating as listed
- Calibrated scale displays wavelength reference in nanometres
- Each scale digit represents 100 nm as listed
- Splits incoming light into visible colours or wavelengths
- Useful for observing emission and absorption spectra
- Supports teaching of wavelength, spectrum and light analysis
- Helpful for physics, chemistry and general science demonstrations
- Do not view the sun, lasers or intense light sources directly
- Use under appropriate laboratory or educational supervision
AUD 68.50 (Ex GST)
Plastic Thermometer Case, Adjustable, Suits All Sizes
- Plastic thermometer case for storage and protection
- Adjustable sleeve design
- Listed as suitable for all thermometer sizes
- Helps protect compatible thermometers during storage
- Useful for laboratory, classroom and general thermometer handling
- Lightweight plastic construction
- Suitable for school, university and general laboratory use
- Helps reduce risk of damage when thermometer is not in use
- Confirm thermometer fit before ordering where exact size is critical
- Supplied as the plastic case only
AUD 2.50 (Ex GST)
Pocket Folding Magnifier, 50 mm Lens
- Pocket folding magnifier for close visual inspection
- Lens size listed as 50 mm
- Magnification listed as 3× and 6×
- Folding design supports compact storage and easy carrying
- Folds into vinyl pouch for practical protection when not in use
- Suitable for classroom, laboratory, field and general inspection use
- Useful for viewing printed text, fibres, labels, small parts and samples
- Confirm magnification requirement, lens size and inspection suitability before ordering
AUD 7.50 (Ex GST)
Pocket Twin Folding Magnifier, 6x + 6x, 12x
- Twin folding pocket magnifier for close visual inspection
- Double pocket magnifier design with two 6× lenses
- Combined magnification listed as 6× + 6× = 12×
- Lens diameter listed as 32 mm
- Frame size listed as 38 mm
- Folding design supports compact storage and easy carrying
- Suitable for classroom, laboratory, field and general inspection use
- Confirm magnification requirement, lens size and inspection suitability before ordering
AUD 6.90 (Ex GST)
Pointed Scalpel with Plain Handle, 35 mm
- Pointed scalpel for laboratory and educational use
- Plain handle design for simple handling
- Size listed as 35 mm
- Material listed as AISI 410 grade stainless steel
- Suitable for dissection, specimen preparation and controlled cutting tasks
- Useful for biology teaching and laboratory preparation work
- Stainless steel construction supports routine laboratory use
- Sharp pointed format supports precise cutting where suitable
- Confirm size, cleaning method and application suitability before use
- Use only under appropriate laboratory or teacher supervision
AUD 4.90 (Ex GST)
Polaroid Filter Pair with 90° Rotating Disc
- Pair of Polaroid filters for classroom polarisation experiments
- Filters are mounted inside a rotating graduated scale
- Designed for support on a compatible optical bench
- Pointer indicates filter angle around a circular scale
- Zero position indicates aligned filters with maximum light transmission
- Rotation can be measured in degrees on either side of zero
- Transmitted light reduces to zero at 90° when filters are crossed
- Central filter diameter listed as 50 mm
- Suitable for teaching polarisation, light transmission and filter rotation effects
AUD 103.50 (Ex GST)
Polaroid Filter Pair with Circular Scale, 100 × 100 mm
- Special Polaroid filter pair for classroom polarisation experiments
- Supplied as a pair of 100 × 100 mm square filters
- One filter includes a printed circular degree scale
- Second filter includes a printed cross for alignment
- Rotary displacement can be measured during light transmission studies
- Polaroid film thickness listed as 0.18 mm
- Suitable for studying polarisation, filter rotation and crossed-filter effects
- Helps demonstrate how light transmission changes with filter angle
- Confirm holder fit, light source alignment and classroom method before use
AUD 68.50 (Ex GST)
Polaroid Filter Pairs, 50 × 50 mm to 100 × 100 mm
- Polaroid filter pairs for classroom optics and polarisation experiments
- Supplied in pairs for comparative polarisation activities
- Available in 50 × 50 mm, 75 × 75 mm and 100 × 100 mm square sizes
- Polaroid film thickness listed as 0.18 mm
- Suitable for demonstrating polarised light and crossed-filter effects
- Useful for light transmission, filter rotation and optics practicals
- Related larger sheet option is available for cutting custom pieces
- Confirm required size, holder fit and classroom experiment method before use
From AUD 22.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polaroid Filter Sheet, 300 × 300 mm
- Polaroid filter sheet for classroom optics and polarisation experiments
- Supplied as a single 300 × 300 mm sheet
- Sheet can be cut into smaller pieces as required
- Polaroid film thickness listed as 0.18 mm
- Suitable for demonstrating polarised light and filter rotation effects
- Useful for physics, optics and light behaviour practicals
- Related standard pair sizes include 50 × 50 mm, 75 × 75 mm and 100 × 100 mm
- Confirm required sheet size, cutting method and classroom safety procedure before use
AUD 291.90 (Ex GST)
Polycarbonate Bench Top Safety Screen
- Bench top safety screen for laboratory and educational use
- Made from high quality clear polycarbonate as listed
- Screen size listed as 600 × 600 mm
- Depth listed as 400 mm
- Polycarbonate thickness listed as 3 mm
- Clear screen supports visibility during demonstrations
- New interlocking design as listed
- Hooked tabs and locking barb support panel assembly
- Packed size listed as 77 × 82 × 4 cm
- Packed weight listed as 6 kg
- Made in Australia as listed
- Use under appropriate laboratory or educational supervision
AUD 176.90 (Ex GST)
Polycarbonate Erlenmeyer Flask Flat Bottom, Sterile
- Polycarbonate Erlenmeyer Flask Flat Bottom, sterile shaker type for cleanroom, cell culture, bioprocessing, and laboratory liquid handling
- Manufactured in a 100K cleanroom environment to support controlled sterile workflows
- Made from USP Class VI polycarbonate material for excellent clarity, strength, and reliable sample visibility
- Gamma sterilized in accordance with ISO 11137-2, with sterility assurance level SAL 10⁻⁶
- RNase/DNase-free, noncytotoxic, and nonpyrogenic for sensitive laboratory and research applications
- Available with plain bottom, baffled bottom, and vented cap options to suit different mixing and culture requirements
From AUD 107.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polycarbonate Micro Tube Rack, 24 Place
- Polycarbonate micro tube rack for laboratory and educational use
- Holds 24 micro tubes
- Suitable for tubes measuring 10 mm diameter × 75 mm long
- Dimensions listed as 165 × 90 mm
- Useful for sample organisation and bench handling
- Compact format for routine laboratory workflows
- Suitable for biology, chemistry and general science practicals
- Helps keep micro tubes upright and accessible during use
- Confirm tube size, tube fit and cleaning method before use
- Use under appropriate laboratory or educational supervision
AUD 12.29 (Ex GST)
Polyethylene Straight Tube Connector, 6 mm
- Straight tube connector for laboratory tubing setups
- Made from polyethylene as listed
- Straight connector design for joining compatible tubing
- Diameter listed as 6 mm
- Useful for simple tubing extensions and connections
- Suitable for compatible air, gas or liquid transfer demonstrations
- Lightweight plastic construction for routine laboratory use
- Practical for school, university and general laboratory apparatus
- Confirm tubing inner diameter before ordering
- Confirm chemical and temperature compatibility before use
- Not for pressure applications unless suitability is confirmed
- Use under appropriate laboratory or educational supervision
AUD 2.50 (Ex GST)
Polyethylene T-Shape Tube Connector for laboratory tubing setups
- T-shaped tube connector for laboratory tubing setups
- Made from polyethylene as listed
- Designed for three-way tubing connections
- Size listed as 70 mm across × 55 mm long
- Useful for splitting or combining compatible tubing lines
- Suitable for compatible air, gas or liquid transfer demonstrations
- Lightweight plastic construction for routine laboratory use
- Practical for school, university and general laboratory apparatus
- Confirm tubing size before ordering
- Confirm chemical and temperature compatibility before use
- Not for pressure or vacuum use unless suitability is confirmed
- Use under appropriate laboratory or educational supervision
AUD 0.80 (Ex GST)
Polyethylene Y-Shape Tube Connector for laboratory tubing setups
- Y-shaped tube connector for laboratory tubing setups
- Made from polyethylene as listed
- Outer diameter listed as 6 mm OD
- Overall length listed as 78 mm
- Each Y branch length listed as 37 mm
- Stem length listed as 37 mm
- Useful for splitting or combining compatible tubing lines
- Suitable for compatible air, gas or liquid transfer demonstrations
- Lightweight plastic construction for routine laboratory use
- Confirm tubing inner diameter before ordering
- Not for pressure or vacuum use unless suitability is confirmed
- Use under appropriate laboratory or educational supervision
AUD 0.80 (Ex GST)
Polypropylene 2-Way Stopcock with PTFE Plug, for 6 to 9 mm Tubing
- 2-way stopcock for controlled tubing connection and flow direction
- Suitable for compatible 6 to 9 mm laboratory tubing
- Polypropylene body supports lightweight routine laboratory use
- PTFE plug supports smooth operation and chemical-resistant performance
- Compact design suits bench setups, tubing lines and apparatus connections
- Stated dimensions are 50 mm long and 60 mm wide across tube connections
- Suitable for laboratory and educational use under appropriate supervision
AUD 18.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.