Oil and Water Separator Receiver Apparatus BORO 3.3 Glass
- Designed for efficient separation of immiscible oil and water phases during distillation
- Manufactured from high quality BORO 3.3 borosilicate glass for chemical and thermal resistance
- Clear visibility enables accurate observation of phase separation and volume collection
- Ideal for essential oil extraction, solvent recovery, and laboratory distillation setups
- Compatible with standard laboratory distillation assemblies and condensers
- Suitable for research laboratories, pilot setups, education, and essential oil applications
From AUD 44.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML E2 Calibration Weight Sets
- OIML E2 calibration weight sets for precision balance checking
- Available in 1 mg starting ranges up to 10 kg
- Available in 1 g starting ranges up to 2 kg
- Suitable for compatible analytical and precision weighing workflows
- Supports laboratory balance verification and calibration reference use
- Useful for research, QC, calibration and regulated weighing environments
- Supplied in protective storage cases to support organisation and cleanliness
- Manufactured to meet OIML R111 requirements for E2 class tolerances
- Handle with suitable forceps or gloves to reduce contamination risk
- Designed for use as high-accuracy working standards in controlled environments
- Suitable for routine performance checks and scheduled calibration verification
- Helps maintain traceability in laboratory weighing systems
From AUD 649.75 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML E2 Calibration Weights for Precision Weighing
- OIML E2 calibration weights for precision weighing verification workflows
- Available from 1 mg through to 20 kg capacity options
- Suitable for compatible analytical balances, precision balances and weighing checks
- Each option is listed by E2 model and nominal capacity
- Supports routine calibration checks, balance verification and quality control procedures
- Useful for laboratories requiring higher-accuracy reference weight selection
- Wide capacity range supports small mass checks through to larger scale verification
- Manufactured to meet OIML E2 tolerance requirements for high-precision applications
- Designed for use in controlled laboratory environments where traceable mass standards are required
- Confirm certificate requirement, storage case, tolerance class and balance compatibility before ordering
From AUD 46.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML F1 Calibration Weight Sets
- OIML F1 calibration weight sets for precision balance checking
- Available in 1 mg starting ranges up to 10 kg
- Available in 1 g starting ranges up to 10 kg
- Suitable for compatible analytical and precision weighing workflows
- Supports routine balance verification and calibration reference use
- Useful for research, QC, education and industrial laboratory weighing areas
- Suitable for checking balance response, repeatability and linearity
- Supplied as selectable weight set ranges for different balance capacities
- Confirm certificate, material, case and full set composition before purchase
- Handle with suitable forceps or gloves to reduce contamination risk
From AUD 172.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML F1 calibration weights for accurate weighing verification workflows
- Available from 1 mg through to 20 kg capacity options
- Suitable for compatible analytical balances, precision balances and scale checks
- Rugged stainless steel construction supports durability during routine use
- F1 class density listed as 7.9 g/cm³
- Individual weights include an impact-resistant plastic case
- Weight sets are supplied in a lined aluminium box with forceps and white cotton glove where applicable
- Suitable for calibration checks, balance verification and quality control procedures
- Available in F1 class for applications requiring reliable reference weight selection
- Confirm certificate requirement, storage format, tolerance class and balance compatibility before ordering
From AUD 17.25 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML M1 Calibration Weight Sets
- OIML M1 calibration weight set for routine balance checking
- Nominal capacity range from 1 mg to 1 g
- Suitable for low-mass balance verification workflows
- Supports routine calibration reference and weighing checks
- Useful for teaching, QC, research and laboratory weighing areas
- Designed for use with analytical and precision balances (within M1 suitability range)
- Helps verify repeatability, linearity and short-term balance performance
- Confirm certificate, material, case and full weight composition before purchase
- Handle with suitable forceps or gloves to reduce contamination risk
From AUD 103.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML M1 Calibration Weights for routine weighing verification
- Available from 1 g through to 20 kg capacity options
- Suitable for compatible balances, bench scales, platform scales and industrial scale checks
- Rugged stainless steel construction supports durability during routine handling
- M1 class density listed as 7.9 g/cm³
- Individual weights include an impact-resistant plastic case
- Weight sets are supplied in a lined aluminium box with forceps and white cotton glove where applicable
- Suitable for calibration checks, balance verification and general quality control procedures
- Available in M1 class for routine mass reference and scale checking applications
- Confirm certificate requirement, storage format, tolerance class and scale compatibility before ordering
From AUD 23.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
OIML M1 cast iron weights for testing and calibrating larger scales
- Available in 5 kg, 10 kg and 20 kg capacity options
- Listed capacities include 5000 g, 10000 g and 20000 g
- Each weight is clearly labelled with nominal value
- Built-in handle supports easier lifting, handling and transportation
- Cast iron housing supports durability during routine industrial scale checks
- Density listed as 7.2 g/cm³
- Individual weights include a plastic case
- Suitable for industrial scales, platform scales, bench scales and routine verification workflows
- Confirm certificate requirement, tolerance class and scale compatibility before ordering
From AUD 80.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Optical d-Timer Non-Contact Ticker Tape Timer
- Non-contact optical ticker tape timer for measuring travelled tape distance during motion experiments
- Built-in optical image sensor detects ticker tape movement without direct contact
- USB connection supports measurement data transfer to a PC or tablet PC
- Dedicated web application automatically generates distance-time graphs
- Web application also supports velocity-time graph and acceleration data display
- Suitable for studying motion, speed, acceleration and dynamics experiments
- Helps measure forward and backward movement of a dynamic cart when using hard paper tape
- Reduces manual graphing work by displaying motion data instantly on a connected device
- Suitable for physics classrooms, science education and teaching laboratory workflows
- Ticker tape type, USB connection, device compatibility and experiment setup should be confirmed before use
AUD 237.00 (Ex GST)
Orbital Decolorizing Shaker with Fixed Plate, 40-200 rpm
- Supplied with fixed plate for compatible orbital shaking workflows
- Fixed plate supports stable placement of suitable vessels and containers during operation
- Orbital decolorizing shaker for smooth and uniform laboratory shaking workflows
- Orbital motion with 20 mm amplitude supports gentle sample mixing and decolorizing applications
- Speed range supports 40-200 rpm for controlled low-speed shaking
- Maximum load capacity is listed as 2 kg with platform
- Double-screen LED display shows time and speed separately for clear operation monitoring
- Continuous or timer operation mode supports flexible workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable routine operation
- Over-speed detection and protection support safer laboratory use
- Compact footprint supports practical placement on laboratory benches
- Work plate dimension is listed as 268 x 268 mm
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.1 kg weight
- Fixed plate compatibility, vessel type, load balance, speed setting and operating conditions should be confirmed before use
AUD 286.50 (Ex GST)
ORP Probe Replacement for GroStar® GS5-E, Double-Junction Platinum Sensor
- Replacement ORP probe for compatible GroStar® pen tester workflows
- Double-junction design supports stable ORP measurement performance
- Platinum sensor supports oxidation-reduction potential testing in compatible solutions
- Listed for GroStar® GS2 Soil pH Pen Tester workflows in the supplied product information
- Compatible with GroStar® GS1, GS2 and GS4 pen tester models
- Supplied as a replacement probe when the original ORP probe reaches end of service life
AUD 130.00 (Ex GST)
Ostwald Capillary Viscometer, College Pattern, BORO 3.3 Glass, 60–90 Second Flow Time
- College pattern Ostwald viscometer for laboratory education
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Useful for student and training purposes
- Suitable for viscosity demonstration and teaching activities
- Pattern listed as Type A
- Emptying time listed as 60 to 90 seconds
- Supplied as 1 piece per pack
- Suitable for school, university and teaching laboratory use
- Handle carefully as laboratory glassware
- Confirm method, liquid compatibility and cleaning procedure before use
- Use under appropriate laboratory or educational supervision
Pasteur Transfer Pipette, Disposable Plastic Pipette for Safe Liquid Handling
- Safe and disposable for contamination-free transfer
- Soft plastic for precise, controlled dispensing
- Available in 1 ml and 3 ml capacities
- Ideal for routine sample handling and transfers
- Used in pathology, research, and teaching labs
- Supplied by LabChoice Australia – Reliable quality
From AUD 2.40 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
PC Media Bottle with Cap, Gamma Sterile
- Gamma sterile PC media bottle with cap for secure laboratory media storage and liquid handling
- Sterile format supports contamination-conscious laboratory, research and life science workflows
- Non-pyrogenic bottle option suitable for sensitive biological and media preparation applications
- Non-cytotoxic design supports safer use in cell culture and general laboratory workflows
- PC bottle body provides a practical format for media, buffer and reagent containment
- Secure cap supports reliable closure during storage, handling and transport
- Suitable for media preparation, buffer storage, reagent handling and laboratory sample workflows
- Practical choice for research, biotechnology, clinical, education and life science laboratories
- Designed for clean, organised and dependable liquid storage in daily laboratory use
- Supplied by LabChoice Australia for dependable gamma sterile PC media bottle use across Australian labs
From AUD 223.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pear Shaped Flask For Distillation, BORO 3.3 Glass
- Pear-shaped profile supports efficient boiling and controlled distillation of liquids
- Narrow neck design helps reduce solvent loss and improves vapour direction into the condenser
- Uniform wall thickness promotes even heat distribution and stable thermal performance
- Suitable for distillation, solvent recovery, rotary evaporation, and synthesis applications
- Compatible with heating mantles and standard laboratory setups
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
From AUD 65.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pen Tester Kit 5-in-1 for pH/EC/ppm/Temperature, GroStar® GS4 Gen II
- Premium 5-in-1 combo pen tester designed for growers and crop-management measurement workflows
- Measures pH, EC, 500 ppm, 700 ppm and temperature for nutrient and growing-solution checks
- pH / EC combo probe includes double-junction pH sensor and titanium conductivity sensor
- Quick 2-point automatic calibration with electrode condition display supports simple operation
- TruRead mode displays average, minimum and maximum values from multiple-location readings
- Replaceable probe design helps extend product usability when the probe reaches end of life
AUD 340.00 (Ex GST)
Pen Tester Kit for EC/ppm Testing, GroStar® GS3 Gen II, Replaceable Probe
- Premium EC / ppm pen tester designed for growers and crop-management measurement workflows
- Measures EC, 500 ppm, 700 ppm and temperature for nutrient and growing-solution checks
- Titanium conductivity sensor supports quick and reliable readings with long probe service life
- Quick 2-point automatic calibration with electrode condition display supports simple operation
- 3-colour backlit LCD screen provides clear reading visibility across different modes
- TruRead mode displays average, minimum and maximum values from multiple-location readings
AUD 215.00 (Ex GST)
Pen Tester Kit for pH Testing, GroStar® GS1 Gen II, Replaceable Probe
- Premium pH pen tester designed for growers and crop-management pH measurement workflows
- Double-junction reference system with blue gel inner solution supports quick and accurate pH readings
- Simple workflow with quick 2-point automatic calibration and electrode condition display
- 3-colour backlit LCD screen supports clear reading visibility across different operating modes
- TruRead measurement mode displays average, minimum and maximum values from multiple readings
- Replaceable probe design helps extend product usability when the probe reaches end of life
AUD 210.00 (Ex GST)
Pen Tester Kit for Soil pH Testing, GroStar® GS2 Gen II, Replaceable Spear Probe
- Premium soil pH pen tester designed for growers and crop-management testing workflows
- Suitable for direct pH testing in soil, coco coir, rockwool, growing media and nutrient solutions
- Replaceable spear soil pH probe supports direct media testing with minimal maintenance
- PTFE ring helps protect the probe junction from clogging by soil particles
- Quick 2-point automatic calibration with electrode condition display supports simple operation
- TruRead mode displays average, minimum and maximum values from multiple-location readings
AUD 485.00 (Ex GST)
Pendulum bobs high quality
- Pendulum bobs for physics and mechanics experiments
- Available as individual bobs or set of 3 brass bobs
- Set of 3 includes 25 mm, 20 mm and 12.5 mm brass bobs
- Individual brass bob options include 25 mm, 20 mm and 12.5 mm diameter
- Individual steel bob option listed as 20 mm diameter
- Individual plastic bob option listed as 20 mm diameter
- Suitable for pendulum motion and oscillation experiments
- Useful for lessons on period, frequency, amplitude and gravity
- Each bob has a drilled hole for string attachment
- Counterbored hole allows the string knot to be hidden and secured
- Suitable for school, university and teaching laboratory use
- Use under appropriate laboratory or educational supervision
From AUD 3.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Penny Head Ground Glass Stopper, High Quality Borosilicate Glass
- Penny head shape allows easy handling and grip
- Ground glass taper ensures airtight sealing
- Heavy quality glass for durability and lab safety
- Used in reagent bottles, flasks, and tubing ports
- Ideal for chemical storage and sample protection
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Percolation for Herbal Alcohol Extract, BORO 3.3 Glass
- Designed for percolation of herbal alcohol extracts in laboratory and botanical processing applications
- Made from BORO 3.3 borosilicate glass for reliable chemical resistance and durability
- Suitable for handling alcohol-based extraction processes with improved material stability
- Clear glass body allows easy observation of extract flow and liquid level during use
- Helps support controlled liquid passage through herbal material for consistent extraction work
- Ideal for education, research, herbal preparation, and laboratory extraction setups
From AUD 90.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Periodic Table of the Elements with Samples in Acrylic
- Periodic table teaching set with element samples enclosed in acrylic
- Size listed as 160 × 120 × 24 mm
- Designed for chemistry, science and STEM education
- Hazardous elements are not included
- Mercury is represented using mercury oxides
- Bromine is represented using bromine compounds
- Technetium and promethium are excluded due to rarity and radioactivity
- Thallium is replaced by a similar shape or alloy due to rarity
- Some elements are represented by impure samples due to reactivity
- Store in a dry place, away from corrosives and heat
- Do not ingest any samples
- Intended for laboratory or educational settings only
AUD 149.50 (Ex GST)
Permanent Magnet Wand, Moulded in Plastic
- Magnetic wand learning resource for science education
- Permanent magnet moulded in plastic
- Suitable for classroom magnetism demonstrations
- Useful for exploring attraction and repulsion
- Supports lessons on magnetic materials and magnetic fields
- Practical tool for sorting magnetic and non-magnetic objects
- Suitable for school, university and teaching laboratory use
- Lightweight classroom accessory for hands-on activities
- Use away from sensitive electronic or magnetic storage devices
- Intended for laboratory or educational settings only
- Use under appropriate teacher or laboratory supervision
AUD 7.50 (Ex GST)
Petri Dish Rack, 60 Place for 90 mm Dishes
- Petri dish rack for 90 mm diameter dishes
- Capacity listed as 60 Petri dishes
- Clear acrylic construction with white polycarbonate posts
- Useful during inoculation, incubation and storage
- Visibility from all sides allows cultures to be viewed and checked
- Suitable for microbiology teaching and laboratory workflows
- Overall dimensions listed as 300 × 205 × 220 mm, L × W × H
- Practical bench and storage format for organised Petri dish handling
- Confirm dish diameter, stack height and incubator compatibility before use
- Use under appropriate laboratory or teacher supervision
AUD 98.50 (Ex GST)
pH Conductivity Meter Kit with ORP, Ion, TDS, Salinity and Temperature, 2 Channel Colour Touch Screen
- pH conductivity meter kit for pH, conductivity, resistivity, salinity, TDS, ORP, ion and temperature measurement workflows
- Includes 2 channel colour touch screen meter, electrode stand, 9615S-10D pH/temp electrode and 3552-10D conductivity/temp electrode
- Includes pH calibration solutions, conductivity calibration solutions and pH electrode filling solution
- Two channels can be displayed simultaneously for flexible multi-parameter measurement viewing
- Digital memory records up to 2000 measurement data sets
- Suitable for laboratories, pharmaceutical water testing, environmental testing, industrial QC and research workflows
AUD 3,755.00 (Ex GST)
pH Electrode Flat Type Glass for Surface Measurement, 1 m Cable
- pH electrode designed for flat surface measurement applications
- Flat type glass electrode format supports direct surface contact testing
- Combination glass body pH electrode supplied with 1 m cable
- Response membrane and liquid junction are positioned on the same surface
- Suitable for measuring pH on skin, leather, paper and leaves
- Useful for laboratory, research, education and material surface testing workflows
AUD 565.00 (Ex GST)
pH Electrode General Purpose, Pb-Free Plastic Body, Universal, BNC Connector with 1 m Cable, Temperature Excluded
- General purpose pH electrode for routine pH measurement applications
- Universal electrode format for meters with compatible BNC input
- 1 m cable supports practical laboratory and field measurement setup
- Temperature measurement is excluded from this electrode configuration
- Pb-free plastic body format supports everyday pH testing workflows
- Suitable for various pH measurement applications across compatible laboratory setups
AUD 235.00 (Ex GST)
pH Electrode Hydrofluoric Acid Resistant, Pb-Free Plastic Body, 1 m Cable
- pH electrode designed for hydrofluoric acid sample measurement workflows
- 3-in-1 plastic body pH electrode with 1 m cable, BNC and phono jack
- Refillable Pb-free plastic body electrode with integrated temperature sensor
- Suitable for measuring 1% hydrofluoric acid solution under specified conditions
- Listed for approximately 1000 measurements in 1% hydrofluoric acid at 25°C with 1 minute immersion
- Suitable for drain water measurement after etching processes
AUD 295.00 (Ex GST)
pH Electrode Long ToupH Glass, 3-in-1 Glass Body, 1 m Cable
- pH electrode Long ToupH glass design for large containers and long test tubes
- 3-in-1 glass body pH electrode with integrated temperature sensor
- Long and thin glass body measures 283 mm length and 8 mm diameter
- Pb-free glass construction supports safer routine laboratory measurement workflows
- Waterproof electrode design supports durable use in compatible testing conditions
- Suitable for microbial culture fluids, large containers, long tubes and specialised pH testing applications
AUD 595.00 (Ex GST)
pH Electrode Needle Type Glass, 3-in-1 Glass Body, 1 m Cable
- pH electrode needle type glass design for food sample measurement workflows
- 3-in-1 glass body pH electrode with 1 m cable, BNC and phono jack
- Needle electrode format supports direct measurement in suitable food samples
- Can also be used for compatible aqueous solution measurement
- Suitable for laboratory, food testing, quality control and research applications
- Meter compatibility, sample texture, insertion depth and cleaning method should be confirmed before use
AUD 540.00 (Ex GST)
pH Electrode Replacement Soil Spear for GroStar® GS2-E
- Replacement soil spear pH electrode for GroStar® GS2 Soil pH Pen Tester workflows
- Measures pH and temperature directly in soil, coco coir, rockwool and compatible growing media
- Suitable for nutrient solution testing as well as direct growing-media measurement
- Swiss spear pH sensor supports accurate direct soil pH measurement with easier handling
- Compatible with GroStar® GS1, GS2 and GS4 pen tester models
- Suitable for growers, hydroponic users, horticulture teams and crop-management testing applications
AUD 345.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.