Digital Mini Wave Signal Generator, 0.1 Hz to 100 kHz, 1 A Output
$469.50(Ex GST)
$469.50(Ex GST)
- Compact digital signal generator for classroom waveform experiments
- Provides sine, square, triangle and sawtooth waveforms
- Frequency range is stated as 0.1 Hz to 100 kHz
- Crystal-locked design with accuracy stated at approximately 0.01%
- Adjustable output up to 15 V peak-to-peak or 5 V AC RMS
- Output can supply up to 1 A into the load
- Suitable for resonance, audio and oscilloscope demonstrations
- Description
- Datasheets & Manuals
Description
The Digital Mini Wave Signal Generator, also known as a laboratory waveform generator, is designed for producing controlled electrical waveforms in physics laboratories, electronics classrooms, university teaching laboratories and supervised educational circuit experiments.
This compact signal generator provides sine, square, triangle and sawtooth waveforms. It is suitable for demonstrating waveform behaviour, frequency response, signal shape and the basic operation of connected instruments such as oscilloscopes. The frequency range is stated as 0.1 Hz to 100 kHz. The crystal-locked design provides high stability, with frequency accuracy stated at approximately 0.01% in the supplied specifications. The quick-set frequency system supports fast preset frequency selection during classroom demonstrations. Resolution is stated as 0.1 Hz up to 10 kHz, and 1 Hz from 10 kHz up to 100 kHz.
The instrument runs from 240 V AC mains power. The adjustable output is stated as 15 V peak-to-peak or 5 V AC RMS, with output current up to 1 A into the load. The output is current limited against overload, supporting safer use in supervised teaching environments. This signal generator is suitable for Kundt’s Apparatus, audio experiments, resonance experiments using inductance and capacitance, and demonstrations involving oscilloscope function. The higher output power also supports larger speakers or vibration apparatus such as Melde’s Apparatus, where compatible. As a mains-powered laboratory instrument, it should be used only under appropriate supervision and connected to compatible loads within the stated output limits. Users should follow standard electrical safety procedures for classroom and laboratory circuit work.
LabChoice Australia supplies Digital Signal Generators for school physics departments, electronics classrooms, university teaching laboratories and educational electrical workspaces. They are suitable for supervised waveform generation, resonance studies, audio demonstrations, oscilloscope training and practical circuit investigations.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Human Torso Anatomy Models For Teaching
From $224.50 (Ex GST)
Kipps Gas Generator Apparatus, Polyethylene
From $59.90 (Ex GST)
Special Price
Hempel Distillation Column Plain BORO 3.3 Borosilicate Glass
From $24.90 (Ex GST)
Kimtech Disposable Wipes, Delicate Lab Task Wipes
From $9.20 (Ex GST)
You May Also Need
Centre Zero Student Volt Meter, Dual Range Galvanometer Type
$43.90(Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
From $43.90 (Ex GST)
Circuit Board D Cell Battery Holder
$8.50(Ex GST)
Circuit Board Kit, Worcester Pattern Complete
$171.90(Ex GST)
Circuit Board Main Board with 5 mm Metal Pins
$34.90(Ex GST)
Circuit Board Rheostat, 10 Ohm, Spring Connect
$19.90(Ex GST)
Conductivity Electrodes, Stainless Steel Type
From $49.90 (Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From $656.50 (Ex GST)
Electronics Trainer Panels, Complete Electronics Study System
From $376.90 (Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From $9.50 (Ex GST)
Genecon Generators and Electrostatic Generator, Electricity Teaching Range
From $72.50 (Ex GST)
Key Press Contact Switch, Silver-Plated Contact Points
$28.90(Ex GST)
Superconductivity Kit, Complete Set
From $18.90 (Ex GST)
Water Turbine Hydro-Electric Power
$216.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab