Electromagnetic Induction Demonstrator with Rotating Wire and Rod Magnet
- Single-turn heavy wire loop rotated by hand around strong rod magnet for core induction demonstrations.
- Loop cuts magnetic field, generates very small induced voltage detectable with a very sensitive meter.
- Demonstrates conductor cutting magnetic lines of force, fundamental electromagnetic induction theory.
- Includes a built-in “mystery” teaching prompt for student discussion during experiments and lessons.
- Optional IEC DC amplifier LB0071-001 boosts small current for reading on student mA bench meters.
$262.00 (Ex GST)
Electron Charge-to-Mass Apparatus with Tube, Solenoid Not Included
- Magic eye electron tube on base
- Heater and plate voltage terminals
- Visible electron fan, end viewing
- Magnetic deflection via solenoid field
- Curvature measurement for e/m method
$187.00 (Ex GST)
Electronic Simulated Radioactive Source (Magic)
- Simulated Geiger counter behaviour, no radioactive source used, safe teaching demonstrator
- Microprocessor display shows counts leaving imaginary source, clear numeric output
- Second display mode shows particles remaining in source, supports half-life concept
- Random count behaviour output, demonstrates counting statistics and variability effects
- 240/12 V AC plug pack powered, suitable for physics and maths lessons on data
$261.00 (Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
- HSC aligned electronics and photonics teaching system, designed for guided student learning with minimal instructor input
- Fixed work panel construction, components not removable, supports consistent setups across repeated classroom sessions
- 2 mm banana plug cable and link system, with adaptors to 4 mm when required for connection flexibility
- Nine experiments supplied as copyable files, provided as a separate CD option for the kit
- CD includes student and teacher versions with answers, single CD covers whole school with free copying permission
From $37.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electronics Trainer Panels, Complete Electronics Study System
- Trainer panels with non-removable components, built for repeated classroom use and consistent circuit setups
- Digital trainer covers gates and circuit building, includes AND OR NAND NOR NOT, plus advanced and counting circuits
- Systems trainer uses sensors with sensitivity controls to build input output logic systems in real application style tasks
- Demonstration gates trainer uses overlays, rear slide switches and LEDs for class prediction and verification activities
- Runs from 12 V supplies depending on model, clear cover protects during storage and holds connection cables
From $309.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrophoresis Power Supplies, LCD Touchscreen, 4-Channel Parallel Output Type
- CD touchscreen for simple setup and clear progress tracking
- 4-channel parallel output supports four electrophoresis units at once
- Constant voltage, current, and power modes for flexible operation
- USB data recording and multi-step programming support controlled runs
- Short-circuit and no-load protection improve laboratory safety
Electrophorus metal with Handle and Plate
- lassic electrophorus device for collecting and removing electrostatic charge in teaching demonstrations
- Works with metal plate and insulating sheet, electrophorus placed opposite side to form capacitor system
- Flat metal disc fixed to a very insulating handle, designed for handling charged plate safely
- Supplied with handle and plate, supports repeatable electrostatics experiments on charge storage and transfer
- Diameter options 50 mm, 100 mm, 150 mm, choose size suited to demonstration scale and apparatus layout
From $42.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrostatic Pith Balls, Laboratory Charge Study Model
- Electrostatic pith balls for classroom demonstrations, available as plain or conductive coated sets
- Approx 8 mm diameter, light mass supports visible attraction, repulsion and charge transfer behaviour
- Plain option supplied as pack of 12, general ball shape, not fully round as described
- Conductive option supplied as pack of 10, surface coated with conductive paint for experiment use
- Suitable for electrostatic investigations using charged rods, electroscopes or induction setups where ball motion
- indicates field effects
From $10.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrostatic Rubbing Cloth Set (2 Pack), Cotton and Wool
- Two electrostatics rubbing cloths for charging plastic rods by friction in classroom practicals.
- Includes wool cloth and cotton flannelette, two common fabrics for static electricity demonstrations.
- Supports charge generation, attraction and repulsion observations after rubbing rods.
- Simple consumable accessory for electrostatics kits, easy to store and issue to students.
- Enables material comparison in friction charging activities without changing experiment setup.
$11.00 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
- Two electrostatics kit levels, simple parts set for basic experiments or advanced Nuffield type for deeper teaching
- Simple kit supports introductory electrostatics activities using a straightforward selection of parts
- Advanced kit includes IEC metal vane electroscope, suited to more advanced electrostatics demonstrations and investigations
- Designed for classroom teaching, selection based on experiment complexity and the required electrostatics equipment
- Choose simple for fundamentals, or advanced for electroscope based work and extended electrostatics experiments
From $58.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrostatics Teaching Tools For Physics Education
- Electrostatics demonstration tools for physics education, includes electroscope and interactive levitation wand options
- Pith ball electroscope used to demonstrate core electrostatic principles, supports charge detection and attraction repulsion activities
- Magic wand fly stick kit includes levitation wand plus 5 pre-cut mylar tinsel flyers and manual, shapes float and dance in air
- Demonstration uses listed bending water, moving aluminium cans, floating bubbles, supports engaging classroom experiments
- Spare flyers only option listed 48.5 x 2.5 cm, sold each, carton qty 60, wand system requires 2 AA batteries not included
From $5.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Enamelled Copper Wire, Standard Wire Gauge Reel Range
• Copper wire range supplied with enamel insulation on 125 g reels
• SWG options from 18 to 32 support thickness-based selection
• 18 SWG variation includes stated 1.22 mm wire diameter
• Suitable for laboratory, educational, coil, and electrical bench work
• Reel format supports organised storage and practical day-to-day handling
From $22.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Energy Conversion and Fibre Optics Classroom Learning Kits
• Teaching kits for energy conversion and fibre optics communications, supports hands on STEM learning in classroom settings
• Energy conversion kit includes wind power fan 14 x 26 cm, hand crank generator 12 x 11 x 8 cm, solar panels 6.5 x 4.5 cm, battery 9.5 x 6.5 cm, buzzer, LED and small fan
• Board mounted energy conversion kit includes on/off switch, solar cell, battery holder, hand crank and 4 mm output sockets
• Accessories listed include 2 AA batteries, electromagnet, buzzer, motor with fan, LED and resistor for expanded experiments
• Fibre optics kit teaches building basic receivers, transmitters and cable interfaces, instruction booklet included, cable stated black not clear, use under supervision
From $45.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Conical Flask, Narrow Neck, Borosilicate Glass (BORO 3.3)
- Tapered shape ideal for swirling and mixing
- Narrow neck minimizes spillage and evaporation
- Versatile use in heating, titration, and storage
- Used in research, education, and industrial labs
- Preferred by lab technicians across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From $2.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Conical Flask, Wide Neck, Borosilicate Glass (BORO 3.3)
- Wide neck allows easy pouring and access
- Tapered shape supports safe swirling and mixing
- Ideal for culturing, heating, and storage tasks
- Used in microbiology, teaching, and lab research
- Trusted by science professionals across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From $4.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Jointed Conical Flask without Graduation, BORO 3.3 Glass
- Erlenmeyer Jointed Conical Flask without graduation, made from BORO 3.3 borosilicate glass for dependable laboratory use
- Plain body design without graduations suits applications where volume markings are not required
- Conical shape allows safe swirling and mixing with reduced risk of splashing
- Jointed neck enables secure connection with compatible laboratory glassware and apparatus
- Suitable for heating, reaction work, sample preparation, and general laboratory procedures
- BORO 3.3 glass provides excellent resistance to heat, chemicals, and thermal shock
- Ideal for laboratory, research, educational, and scientific applications requiring durable jointed glassware
From $59.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Jointed Conical Flask, BORO 3.3 Glass
- Erlenmeyer Jointed Conical Flask made from BORO 3.3 borosilicate glass for reliable laboratory performance
- Conical flask shape supports efficient mixing and swirling with reduced splash risk
- Interchangeable joint allows secure connection with compatible laboratory glassware
- Suitable for heating, sample preparation, reaction work, and general bench use
- BORO 3.3 glass offers strong resistance to heat, chemicals, and thermal shock
- Clear glass construction helps with easy observation of liquid level and reaction process
- Ideal for laboratory, educational, research, and routine scientific applications
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Ether Cooling Condenser, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed for efficient condensation of low boiling point solvents such as diethyl ether and other volatile organics
- Extended cooling surface improves vapour contact and heat exchange during distillation and reflux
- Supports smooth solvent recovery with reduced vapour loss in routine and research applications
- Compatible with standard laboratory joint sizes for easy integration into existing glassware setups
- Suitable for organic synthesis, solvent purification, teaching laboratories, and research workflows
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
Evaporating Dishes, Laboratory Glass Dish Range for Solvent Removal
- Glass evaporating dishes in multiple diameters and heights, supports solvent evaporation and concentration steps in routine lab work
- Base styles listed flat bottom or round bottom, choose format to suit heating setup and stability requirements
- Sizes stated 60 x 30 mm, 90 x 45 mm, 120 x 60 mm and 150 x 75 mm, match surface area to sample volume and evaporation rate
- Sold individually for flexible ordering, supports replacement of single items and small quantity lab stocking
- Carton quantity stated for 60 mm dish, 300 pieces per full carton, supports bulk purchasing for teaching labs and prep rooms
From $7.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Expansion Adapter, BORO 3.3 Glass
- Designed to expand joint compatibility for smooth glassware connections
- Provides secure transitions between ground glass joints in distillation and reflux setups
- Precision made for tight sealing and reduced vapor loss during heating work
- Ideal for organic chemistry, teaching labs, and research scale assemblies
- Crafted for reliable performance in high temperature and chemical environments
- Made from LabChoice BORO 3.3 glass, high quality
From $19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Expansion-Type Wilson Cloud Chamber, Radioactive Sources Not Included
- Expansion-type Wilson cloud chamber method
- Alcohol pad vapour supersaturation setup
- Partial vacuum via pump for expansion
- Alpha pin source creates visible tracks
- Light source required, sources not included
$470.00 (Ex GST)
Extension Adapter Borosilicate Glass Laboratory Grade
-
- Extends the connection between glassware components with precision fit
- Ensures secure, leak-free joints in complex lab setups
- Suitable for distillation, reflux, and extraction assemblies
- Resistant to thermal shock and chemical corrosion
- Made from durable BORO 3.3 borosilicate glass for long-term use
- Manufactured and quality-tested by LabChoice Australia
From $14.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Filter Funnel with Perforated Disc, BORO 3.3 Glass
- BORO 3.3 borosilicate glass construction for reliable chemical and heat resistance
- Perforated disc design provides stable support for filter paper during filtration
- Clear glass body allows easy visibility of liquid flow and filtration progress
- Suitable for routine laboratory filtration work in schools, research, and industrial labs
- Reusable, durable glassware option for consistent wet chemistry applications
- Smooth laboratory finish for easy cleaning and repeated use
- Designed for accurate, controlled filtration with compatible flask or receiver setups
Filter Funnels Long Stem 60 Degree Cone, BORO 3.3 Glass
- 60 degree cone long stem filter funnel designed for steady gravity filtration and clean transfer
- Manufactured from BORO 3.3 borosilicate glass for strong chemical resistance and thermal shock protection
- 60 degree cone supports secure seating of filter paper and helps maintain consistent flow
- Long stem improves reach into narrow neck flasks, reduces splashing, and supports drip control
- Smooth glass surface minimises residue, supports easier cleaning, and reduces sample loss
- Suitable for routine filtration in Australian school labs, universities, research, and QC environments
From $1.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Filter Paper, High-Quality, Fast Filtration & Superior Retention (Pack of 100 sheet)
- Fast filtration for improved lab efficiency
- Superior particle retention without clogging
- Lab-grade quality for consistent performance
- Used in gravimetric analysis, separation, and testing
- Suitable for schools, industry, and research labs
- Trusted consumable from LabChoice Australia
From $8.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Fine-Grade Copper Mesh Sheet, 150 × 150 mm
- Fine-grade copper mesh square, 150 × 150 mm, multipurpose lab consumable.
- Porous structure for fluid pass-through and particle capture during chemical filtration.
- Captures solid particles and impurities, application depends on process needs.
- Suitable for thermal insulation tasks where a mesh format is required.
- Can be used as gasket material, selection depends on mesh characteristics and fit
$33.00 (Ex GST)
Fire Syringe Fire Piston Kit, Classroom Gas Heating and Ignition Apparatus
• Fire syringe fire piston kit, rapid air compression demonstrator for gas heating and temperature rise.
• Shows work on gas increases temperature when compressed quickly into smaller volume.
• Visual ignition result with tinder, clear link between compression process and heat generation.
• Used in gas law teaching discussions, often referenced in Charles’s law and temperature behaviour lessons.
• Laboratory or educational use only, supervise closely, manage ignition safely and allow cooling after use.
$60.00 (Ex GST)
Flame Spectrometer for Emission and Atomic Absorption
- tudent spectrometer for flame emission, atomic absorption, and colourimetry demonstrations in classroom
- Operates with or without computer, includes RS232, Windows software, cables and nebuliser
- Integrated air and gas controls atomise samples and run the burner during experiments
- Instructions and experiments devised by Monash University supplied with the spectrometer package
- Mini sodium light source for AA or optical work, rotating shield selects viewing apertures, supports mercury, sodium, neon or helium lamps
From $508.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flask Base Stand Polypropylene, Durable Base for Round Bottom or Flat-Bottom Flasks
- Provides stable support for lab flasks
- Suitable for both round and flat bottom styles
- Chemical-resistant and easy to clean
- Polypropylene construction ensures long-term durability
- Used in research, teaching, and industrial labs
- Supplied by LabChoice Australia – Trusted quality
$13.95 (Ex GST)
Flat Bottom Flask Two Neck Jointed, BORO 3.3 Glass
- Restricted Item – an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Two neck jointed flat bottom flask designed for simultaneous connections such as reflux, addition, or monitoring during reactions
- Flat bottom provides stable placement on hot plates and lab benches without external support
- Ideal for synthesis, distillation, reflux, and controlled laboratory reactions
- Clear borosilicate construction allows easy visual monitoring of contents and reaction progress
- Suitable for academic, research, and industrial laboratories requiring reliable jointed glassware
- Made from LabChoice BORO 3.3 glass – High quality
From $19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flat Glass Plates Set of 6 for Interference Experiments
- Flat glass plates set of 6 for Newton rings and thin air-film interference practicals.
- Two plates form an air wedge using thin paper spacer at one end, contact at other.
- Produces Newton rings style fringes as light passes glass, thin air layer, and returns through glass.
- Best viewed with monochromatic source, sodium light commonly used, to make band contrast and spacing clear.
- Enables measurement of bright and dark band spacing, supports air-wedge geometry discussions in optics lessons
$48.00 (Ex GST)
Flat Handle Dissecting Needles, Specimen Separation and Examination Type
- Flat handle dissecting needles for specimen separation and examination, supports controlled dissection work in labs and education
- Anti-roll flat handle design described, improves grip security and bench stability during manipulation of tissues and structures
- Straight arrow point option listed, suited to probing and positioning where a defined arrow tip is required
- Straight fine point option listed, supports more delicate handling and fine positioning during detailed dissection tasks
- Designed for scientific and medical learning contexts, select point type based on required control, handling style and specimen work
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flat Plate Electrodes, Terminal Fitted Conductivity and Electrochemistry Range
- Flat plate electrodes with terminals, size stated 75 x 25 x 3 mm across all options for consistent experimental geometry
- Individual materials listed aluminium, carbon, copper, iron and lead, supports comparison of electrode behaviour in circuits and electrochemistry
- Terminal fitted to each electrode, supports straightforward lead attachment and repeatable bench setup
- Set option includes five materials in one pack, aluminium carbon copper iron lead, supports class demonstrations and side by side testing
- Suitable for laboratory or educational settings under supervision, clean electrodes between runs to reduce cross contamination and ensure consistent results
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.