Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
- Spare glass tubes for classic 1 m high Boyle’s law apparatus, replacement parts for low pressure demonstrations
- Closed end tube option, approx 200 mm length, suits sealed volume end of the classic pattern setup
- Open end tube option, approx 200 mm length, suits open volume end for pressure volume investigation
- Used to restore tube pair operation, supports classroom experiments without replacing full apparatus
- For laboratory or educational settings only, handle glass carefully, inspect for cracks and use under supervision
From AUD 21.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law High Pressure Air Pump, Plastic
- Spare high pressure air pump for compatible Boyle’s Law apparatus
- Designed for Boyle’s Law high pressure type equipment
- Plastic construction as listed
- Can be pumped by hand as listed
- Supports approved pressure and volume gas law experiments
- Practical spare or replacement pump for existing apparatus
- Suitable for school, university and teaching laboratory use
- Useful for classroom Boyle’s Law demonstrations
- Confirm apparatus and connection compatibility before ordering
- Air pump only, Boyle’s Law apparatus is not included
- Check fittings and seals before pressurising
- Use under appropriate laboratory or educational supervision
AUD 52.90 (Ex GST)
Boyle’s Law High Pressure Coloured Fluid Bottle
- Coloured fluid for Boyle’s Law high pressure apparatus
- Supplied in bottle form as listed
- Enough fluid for one loading as listed
- Designed for compatible Boyle’s Law high pressure equipment
- Supports gas law pressure and volume demonstrations
- Useful for school, university and teaching laboratory use
- Practical refill or replacement fluid for existing apparatus
- Helps improve visibility during approved Boyle’s Law experiments
- Confirm apparatus compatibility before ordering
- Fluid only, Boyle’s Law apparatus is not included
- Wear suitable PPE and follow approved handling procedures
- Use under appropriate laboratory or educational supervision
AUD 21.90 (Ex GST)
Boyle’s Law High Pressure Metal Set O-Rings, Set of 8
- O-ring set for compatible Boyle’s Law high pressure metal set
- Supplied as a set of 8 O-rings
- Suitable for compatible pot and sealing locations as listed
- Practical spare or replacement sealing part
- Supports maintenance of Boyle’s Law high pressure apparatus
- Useful for school, university and teaching laboratory use
- Helps maintain correct sealing in approved apparatus setups
- Confirm apparatus model and O-ring fit before ordering
- O-rings only, Boyle’s Law apparatus is not included
- Do not use damaged, hardened or incorrectly sized O-rings
- Check seals before pressurising the apparatus
- Use under appropriate laboratory or educational supervision
AUD 13.50 (Ex GST)
Boyle’s Law High Pressure Spare Glass Tubes
- Spare heavy walled glass tubes for compatible Boyle’s Law high pressure apparatus
- Available for later model high pressure Boyle’s Law equipment
- Later model tube is open at both ends
- Later model tube size listed as 12 mm OD × 649 mm length
- Later model tube has 2.2 mm wall thickness
- Later model tube has flamed ends for smooth edges
- Available for early model high pressure Boyle’s Law equipment
- Early model tube has closed end design
- Early model tube size listed as 12 mm OD × 650 mm length
- Practical spare or replacement tube for Boyle’s Law apparatus maintenance
- Confirm model compatibility before ordering
- Use under appropriate laboratory or educational supervision
From AUD 34.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Syringe Apparatus
- Syringe type Boyle’s Law apparatus for classroom gas law demonstrations
- Uses a commercial plastic syringe to show pressure and volume relationship
- Weights are placed on the system to compress the gas to selected volumes
- Volume change is observed through plunger movement on the syringe
- Convenient and low-cost apparatus for introductory physics and chemistry lessons
- Approximate results are expected due to friction losses in the syringe system
- Suitable for supervised laboratory and educational use
AUD 68.50 (Ex GST)
Boyle’s Law Syringe Only, Commercial Plastic Syringe
- Replacement syringe only for syringe type Boyle’s Law apparatus
- Uses a commercial plastic syringe for gas compression demonstrations
- Supports pressure and volume relationship teaching activities
- Weights can be applied in a compatible setup to compress trapped gas
- Plunger movement markings indicate volume change during experiments
- Suitable for introductory gas law demonstrations in classrooms
- Use with compatible apparatus under appropriate supervision
AUD 3.90 (Ex GST)
Brannan Digital Paddle Thermometer, high precision for Temperature Measurement
- Digital paddle thermometer for laboratory and technical temperature checks
- Brand listed as Brannan
- Certificate option listed as GE5145TC with pre-calibrated certificate
- Brannan code listed as 31/158/0
- Temperature range listed as -50°C to +250°C
- Switchable between °C and °F as listed
- Resolution listed as 0.1°C
- Probe dimensions listed as 125 mm × Ø3.5 mm, reducing to 2.25 mm
- Powered by 1 × CR2032 lithium battery as listed
- Auto power off after 10 minutes of inactivity
- Use under appropriate laboratory or technical supervision
From AUD 65.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Bar and Gauge Apparatus with Insulating Handle
- Classic brass bar and gauge apparatus for thermal expansion demonstrations
- Demonstrates the effect of heating metal
- Shows expansion in both length and diameter
- Heated bar cannot fit through the matching gauge
- Chilled gauge can contract so the bar no longer fits correctly
- Brass bar and gauge are carefully machined and matched for experiment performance
- Insulating handle supports safer handling during approved demonstrations
- Unlike ball and ring apparatus, the bar and gauge are not chained together
- Suitable for school, university and teaching laboratory use
- Useful for heat, solids and thermal physics experiments
- Bar and gauge only, heating and cooling accessories are not included
- Use under appropriate laboratory or educational supervision
AUD 47.50 (Ex GST)
Brass Filter Pump with Non-Return Valve
- Nickel plated brass filter pump for water-driven vacuum use
- Provides vacuum assistance to -80 kPa for laboratory filtering
- Side outlet connects to the flask containing the filtrate
- Available with push-on hose or 3/4 inch BSP tap fitting
- Non-return valve included in both supplied fitting options
- Suitable for filtration and stated general vacuum requirements
From AUD 77.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Slotted Spare Weights, Economy for Lab Weight Sets
- Spare brass slotted weights for laboratory and education use
- Available as 50 g and 100 g economy weight options
- Supplied as individual slotted weight only
- Designed for use with compatible brass slotted weight sets
- 50 g spare weight suits LC-80-GE5706-01 only
- 100 g spare weight suits LC-80-GE5705-01 only
- Suitable for replacement or expansion of existing weight sets
- Slotted design supports use with compatible carriers
- Useful for mass, force, pulley, spring and mechanics experiments
- Carrier is not included unless specified separately
- Confirm product code compatibility before ordering
- Use under appropriate laboratory or educational supervision
From AUD 6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Slotted Weight Carrier Only, Economy for Lab Balances
- Spare brass slotted weight carriers for laboratory and education use
- Available as 50 g and 100 g economy carrier options
- Designed for use with compatible brass slotted weight sets
- 100 g carrier suits LC-80-GE5705-01 and LC-80-GE5705-03
- 50 g carrier suits LC-80-GE5706-01 and LC-80-GE5706-03 only
- 50 g carrier has listed rod diameter of 6 mm
- Suitable for replacement or spare carrier requirements
- Supports physics, mechanics and force experiments
- Useful with compatible slotted weights for building hanging loads
- Carrier only, slotted weights are not included
- Confirm model compatibility before ordering
- Use under appropriate laboratory or educational supervision
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Slotted Weight Sets for IEC Weight Carriers
- Brass slotted weight sets for laboratory and education use
- Suitable for physics, mechanics and force experiments
- Available as 50 g and 100 g slotted weight sets on carriers
- 50 g carrier set includes 9 × 50 g weights on a 50 g brass carrier
- 100 g carrier set includes 9 × 100 g weights on a 100 g brass carrier
- Total mass options include 35 g, 200 g, 500 g and 1,000 g
- Brass construction suitable for routine classroom experiments
- Slotted shape supports use with standard IEC weight carriers
- Accuracy listed as 1% for 50 g, 100 g and 200 g sets
- Accuracy listed as 2% for the 35 g set
- Individual slotted weights and carriers are available separately
- Use under appropriate laboratory or educational supervision
From AUD 14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Slotted Weight Sets with Carriers
- Brass slotted weight sets for laboratory and education use
- Available in 10 g, 50 g and 100 g weight formats
- Supplied with matching slotted weight carrier
- 10 g set includes 9 × 10 g weights plus 1 × 10 g carrier
- 50 g economy set includes 9 × 50 g weights plus 1 × 50 g carrier
- 100 g economy set includes 9 × 100 g weights plus 1 × 100 g carrier
- Total assembled mass options include 100 g, 500 g and 1 kg
- 50 g economy set is listed with accuracy ±0.3%
- 100 g economy set includes listed accuracy values for specified loads
- Useful for force, mass, pulley, spring and mechanics experiments
- Individual slotted weights and carriers are available separately
- Use under appropriate laboratory or educational supervision
From AUD 31.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Slotted Weights, Individual for Mechanics and force experiments
- Individual brass slotted weights for laboratory and education use
- Available sizes include 5 g, 10 g, 20 g, 25 g, 50 g and 100 g
- Pressed brass construction
- Slotted design allows use with compatible weight carriers
- 20 g, 25 g, 50 g and 100 g weights are listed as suitable for the standard IEC slotted weight carrier
- 20 g to 100 g options are listed with accuracy better than 1%
- Useful for force, mass, mechanics and balance experiments
- Suitable for physics classrooms and teaching laboratories
- Helps build variable hanging loads during approved experiments
- Supplied as the selected individual slotted weight only
- Weight carrier and stand apparatus are not included unless specified separately
- Use under appropriate laboratory or educational supervision
From AUD 4.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Thermometer Cases, Slot Front, Case Only
- Brass thermometer case range for laboratory thermometer protection
- Designed to protect standard 6.5 mm diameter laboratory thermometers
- Slot front allows easy thermometer reading while in the case
- Suspension ring at the top supports hanging or secure placement
- Holes in the bulb end support quicker temperature response
- Brass construction for durable routine laboratory use
- Available in 155 mm, 305 mm, 355 mm and 405 mm lengths
- Suitable for school, university and general laboratory workflows
- Supplied as case only, thermometer not included
- Confirm thermometer length and diameter before ordering
From AUD 28.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bridge Plate, IT1100 TH Series Steam Protection for Lid Use
- Bridge plate for IT1100 to suit TH series immersion circulator use
- Easily removable design supports quick and easy cleaning after use
- Provides protection from steam to the connected TH unit during operation
- Required when both a TH immersion circulator and lid are being used
- No-port bridge plate version suits THx000 immersion circulator setups
- Bridge with recirculation ports is available as an alternative option
Brinometer Hydrometer, 0 to 100% Brine, 230 mm
- Brinometer hydrometer for measuring brine concentration
- Measuring range listed as 0 to 100% brine
- Designed to measure percentage saturated solution of brine in water
- Calibration temperature listed as 15.6°C, equivalent to 60°F
- Division listed as 1.0
- Length listed as 230 mm
- Brand listed as Brannan U.K.
- Suitable for salt solution checks and brine preparation workflows
- Useful for laboratory, food science and educational applications
- Confirm sample temperature, cylinder size and reading method before use
AUD 87.50 (Ex GST)
Brix Hydrometer, Glass, for Sugar Concentration Measurement
- Glass Brix hydrometer for laboratory and beverage testing use
- Brand listed as Thimson
- Material listed as glass hydrometer
- Calibrated at 27°C as listed
- Approximate total length listed as 270 mm
- Used for measuring sugar concentration in compatible liquids
- Suitable for wine, juice, syrup and fermentation-related workflows
- Brix scale is listed as equivalent to Balling and Plato scales
- Available ranges include 0 to 30 Brix through 60 to 90 Brix
- Supplied as 1 piece per pack as listed
- Glass hydrometer should be handled carefully
- Use under appropriate laboratory or educational supervision
From AUD 39.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchi Rotavapor Evaporating Flask, BORO 3.3
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Evaporating flask designed for Büchi rotary evaporator systems
- Manufactured from BORO 3.3 borosilicate glass for excellent thermal and chemical resistance
- Uniform wall thickness supports safe rotation under vacuum conditions
- High clarity glass for easy observation of solvent evaporation
- Suitable for solvent recovery, concentration, and distillation in research and industrial laboratories
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 18.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Filtering Flask with Side Arm, Jointed, Borosilicate Glass (BORO 3.3)
- Thick-walled body supports vacuum filtration tasks
- Side arm enables secure vacuum tubing attachment
- Jointed top fits standard Buchner funnel assemblies
- Ideal for microbiology, chemical separation, QC testing
- Trusted across academic, research, and industrial labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 31.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Filtration Flask Kit, Vacuum Filter Flask Set, BORO 3.3
- Complete Büchner filtration flask kit for vacuum filtration workflows
- BORO 3.3 borosilicate glass for chemical resistance and lab durability
- Side-arm vacuum filter flask enables secure tubing connection to a vacuum source
- Designed for fast, efficient separation of solids from liquids under reduced pressure
- Suitable for teaching labs, research labs, and routine sample preparation tasks
From AUD 134.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Filtration Flask with Side Arm, BORO 3.3
- Made from high quality BORO 3.3 borosilicate glass for excellent thermal shock resistance and long service life
- Integrated side arm enables secure vacuum connection for efficient Büchner filtration setups
- Thick, reinforced walls provide enhanced mechanical strength under reduced pressure
- High chemical resistance suitable for acids, solvents, and routine laboratory reagents
- Ideal for vacuum filtration, separation, and sample preparation in research, educational, and industrial laboratories
- Designed for compatibility with standard Büchner funnels and rubber stoppers used in Australian laboratories
From AUD 16.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Funnel Porcelain, Heavy Duty
- Porcelain Buchner funnel for efficient vacuum filtration in laboratory applications
- Perforated plate supports filter paper for solid-liquid separation
- Suitable for use with side-arm filter flasks and vacuum setups
- Durable laboratory-grade porcelain for repeated routine use
- Ideal for schools, universities, research, and industrial laboratories
- Smooth glazed finish helps with cleaning after filtration work
From AUD 13.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Funnel, Polypropylene, Durable, Chemical Resistant for Vacuum Filtration, High Quality
- Robust polypropylene for vacuum filtration
- Resistant to acids, bases, and solvents
- Perforated plate ensures efficient filtration
- Lightweight, break-resistant construction
- Ideal for schools, QC, and analytical labs
From AUD 8.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Funnel, Sintered Glass with Side Arm and Ground Joint, BORO 3.3 Glass
- BORO 3.3 borosilicate glass for strong chemical resistance and dependable thermal performance in vacuum filtration
- Sintered glass disc provides uniform filtration support, no filter paper required for many applications
- Side arm vacuum connection suits standard tubing to apply suction and speed up filtration
- Consistent porosity and flow helps achieve repeatable separation of fine particulates and precipitates
- Reusable and easy to clean, suitable for routine lab workflows and frequent cycles
- Ideal for precipitate collection, sample clarification, and fine filtration in teaching and research labs.
From AUD 32.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Funnel, Sintered Long Stem with Ground Joint, BORO 3.3 Glass
- BORO 3.3 glass supports chemical resistance and laboratory durability
- Integrated sintered disc provides a fixed porous filtration surface
- Long stem helps guide filtrate into compatible receiving glassware
- Ground joint supports secure connection with matching jointed assemblies
- Suitable for vacuum filtration, precipitate collection, and sample washing
- Useful where filter paper-free filtration is preferred
- Porosity should be selected according to particle size and filtration speed
- Suitable for Australian schools, universities, research, QC, and industrial laboratories
From AUD 35.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Buchner Funnel, Sintered with Ground Joint for Vacuum Filtration, BORO 3.3 Glass
- Material: BORO 3.3 borosilicate glass for chemical resistance and thermal stability.
- Design: Integrated sintered glass disc provides filtration without separate filter paper.
- Connection: Ground glass joint allows attachment to a compatible vacuum filtration flask.
- Capacities: Available in 35, 80, 200, 500 and 1000 mL sizes.
- Disc Diameters: Approximately 30, 40, 65, 90 and 120 mm, respectively.
- Porosity Options: G-0, G-1, G-2, G-3 and G-4 for different particle retention requirements.
- Applications: Suitable for laboratory solid-liquid separation, precipitate collection and sample preparation; supplied individually. Use with a compatible receiving flask and pump.
From AUD 15.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bumper Guard Measuring Cylinder, Shock-Absorbing, Chemical Resistant, Heavy Quality
- Bumper guard provides extra protection from impact
- Thick-walled glass ensures long-term durability
- Shock-absorbing base reduces breakage risk
- Chemical resistant for use with varied reagents
- Ideal for industrial, QC, and educational labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 1.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bunsen Burner Flame Spreader, Batwing Type
- Batwing type flame spreader for compatible Bunsen burners
- Designed to suit Technos/IEC Bunsen burners
- Produces a wider flame pattern for heating demonstrations
- Useful for classroom and laboratory burner accessories
- Supports controlled heating across a broader area
- Bunsen burner is not included
- For laboratory or educational use under appropriate supervision
AUD 16.50 (Ex GST)
Bunsen Burner for Natural Gas & LPG, Adjustable Flame Laboratory Burner
- Compatible with both natural gas and LPG
- Adjustable air regulator for flame control
- Stable base for secure lab bench placement
- Used in heating, sterilization, and combustion
- Ideal for schools, research, and QC labs
- Supplied by LabChoice Australia – Built for safety
From AUD 20.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bunsen Burner Kit with Rubber Tube, Tripod Stand, Wire Gauze Mat and Clay Pipe , Laboratory Heating Support
- Complete Bunsen burner heating support kit with rubber tube gas connection
- Tripod stand provides stable support for beakers, flasks and crucibles
- Wire gauze mat distributes heat evenly, helps reduce hot spots on glassware
- Clay pipe supports controlled heating and simple flame direction for practical's
- Suitable for school, university and routine laboratory heating applications
- Ideal for boiling, gentle heating, evaporation and general sample warming
- Inspect rubber tube for cracks, ensure secure fit and leak check before use
AUD 48.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.