E
x
p
l
o
r
e
M
o
r
e
:
Heat & Light
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From $62.50 (Ex GST)
From $62.50 (Ex GST)
- Metal calorimeter heating blocks for specific heat capacity experiments
- Suitable for comparative heat studies in physics and science classrooms
- Each block has a stated mass of 1 kg and 75 mm diameter
- Material options include aluminium, brass, copper and zinc plated steel
- Consistent block geometry supports controlled comparison between metals
- 12 mm hole allows insertion of a compatible thermometer or temperature probe
- For laboratory or educational use only, handle heated blocks with care
[request_quote_button]
- Description
Description
The Calorimeter Heating Blocks, also known as educational specific heat capacity blocks, are designed for practical heat studies in school science laboratories, physics classrooms and university teaching environments. They support experiments where students compare the thermal behaviour of different metals under controlled conditions.
Each block has a stated mass of 1 kg and a diameter of 75 mm. This consistent size and mass across the range helps support comparative classroom experiments, allowing students to observe how different materials respond during heating and cooling procedures. The range includes aluminium, brass, copper and zinc plated steel options. These material choices allow teachers and students to compare specific heat capacity values and thermal response between different metals during structured heat and energy practicals.
Each block includes a 12 mm diameter hole, allowing insertion of a compatible thermometer or temperature probe where required by the experiment setup. This supports direct temperature monitoring during heat capacity investigations and related thermal measurement activities.
These heating blocks are suitable for experimental determination of specific heat capacity, heat transfer demonstrations, temperature change observations and comparative metal property studies. Users should select the correct block material according to the teaching activity and required comparison. Heated metal blocks must be handled carefully using suitable laboratory tools, heat-resistant protection and appropriate supervision. The blocks are intended for laboratory or educational settings only and should be used according to the school or laboratory safety procedure.
LabChoice Australia supplies Calorimeter Heating Blocks for school physics laboratories, university teaching laboratories, science classrooms and educational heat studies. They are suitable for supervised specific heat capacity experiments, comparative thermal property demonstrations and practical investigations of heat energy using compatible measuring equipment.
Slotted Weight Sets with Carrier, Brass and Aluminium Laboratory Range
From $31.50 (Ex GST)
Gas Jars For Collecting Gases For Laboratory
From $1.50 (Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
$227.70(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Jacketed Round Bottom Double Wall Flask For Distillation BORO 3.3
From $699.90 (Ex GST)
Crow Receiver Cylinder Class B with Interchangeable Stopper, BORO 3.3
From $39.90 (Ex GST)
You May Also Need
Bonded Compound Bar for Thermal Expansion
From $9.90 (Ex GST)
Conductometer Heat Conduction Apparatus
$24.90(Ex GST)
Convection in Air Apparatus- Mine Shaft Apparatus
$72.50(Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From $26.50 (Ex GST)
Flat Glass Plates Set of 6 for Interference Experiments
$59.90(Ex GST)
Heat Conductivity Rods
From $12.50 (Ex GST)
Hodson Optical Bench and Lens Kit
From $247.90 (Ex GST)
Laboratory Light Sources
From $12.50 (Ex GST)
Laser View Prism and Bar Kits
From $103.50 (Ex GST)
Lens and Mirror Holders and Lens Paper
From $6.90 (Ex GST)
Mini Spectral Lamp Power Supply and Holder, Without Lamp
$435.90(Ex GST)
Round Biconcave Lenses, Unmounted Diverging Lens Teaching Range
From $3.50 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$9.90(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
$422.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pocket Twin Folding Magnifier, 6x + 6x, 12x
$6.90(Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
$12.50(Ex GST)
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
$69.90(Ex GST)
TOP RATED PRODUCTS
Pocket Twin Folding Magnifier, 6x + 6x, 12x
$6.90(Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
$12.50(Ex GST)
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
$69.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
