E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Calcium Ion Selective Electrode Kit, Combination, 1 m Cable
AUD 1,475.00(Ex GST)
AUD 1,475.00(Ex GST)
- Combination calcium ion selective electrode kit for Ca²⁺ measurement workflows
- Supplied with 2 calcium electrode tips for compatible electrode operation
- Includes filling solution, 100 ppm standard, 1000 ppm standard and calcium ionic strength adjustor
- Includes syringe, disposable dropper, protective pipe and manual
- 1 m cable with BNC connection compatibility for suitable pH / ION meters
- Fixed-temperature measurement conditions should be maintained for consistent ion testing
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Calcium Ion Selective Electrode Kit, Combination, 1 m Cable, also known as a calcium ISE kit, is designed for laboratories that need targeted calcium ion measurement using a compatible pH / ION meter.
This kit is suitable for water-quality testing, environmental analysis, education, research and routine laboratory workflows where calcium concentration needs to be measured using an ion-selective method rather than a general conductivity or pH reading. Ion selective electrodes respond to the activity of selected ions in a test liquid and are used with compatible meter systems to provide concentration-based readings after calibration. Correct sample preparation and calibration practice are important for dependable results.
Included with this Calcium Ion Selective Electrode Kit: Filling Solution, 100 ppm Calibration Solution, 1000 ppm Calibration Solution and 2 Tips.
Suitable for pH / ION Meters: This calcium ISE kit is designed for use with compatible pH / ION meters for calcium ion measurement workflows.
Users should keep testing conditions consistent and confirm the required ionic strength adjustment procedure before measurement. Electrode tip condition, filling solution, calibration standards, sample temperature and meter setup should be checked before use.
LabChoice Australia supplies Calcium Ion Selective Electrode Kits for schools, universities, environmental testing laboratories, water-quality teams and research facilities requiring calcium ion measurement using compatible pH / ION meter systems.
Features
- Calcium Ca²⁺ ion selective electrode kit
- Combination ion selective electrode format
- 1 m cable included
- BNC connector included
- Suitable for compatible pH / ION meters
- Includes calcium electrode tip, 2 pcs
- Includes 1000 mg/L calcium ion standard solution, 50 mL
- Includes 100 mg/L calcium ion standard solution, 50 mL
- Includes calcium electrode filling solution, 50 mL
- Includes calcium ionic strength adjustor, 50 mL
- Includes syringe
- Includes disposable dropper
- Includes protective pipe
- Includes manual
- Used with calibration standards for direct ion concentration readings on compatible ion meters
- Measurement temperature should be kept consistent because ion response can change with temperature
- Sample preparation, calibration sequence and electrode care should be confirmed before use
| Specification | Details |
|---|---|
| MODEL | 6583S-10C |
| Measurement Range | 0.4 – 40,080 mg/L Ca2+
1 x 10-5 – 1 mol/L Ca2+ |
| Temperature Range | 0 – 50°C |
| pH Range | pH 5 – 11 (4.0 mg/L Ca2+) |
| Accuracy | ± 4% |
| Internal Electrode | Ag/AgCl |
| Internal Solution | 3 mol/L NH4Cl |
| Liquid Junction | Movable sleeve |
| Connector & Cable Length | BNC, 1m |
| Dimensions | 150mm (length), 16.5mm (diameter) |
| Wetted Part Materials | PVC, PSU |
| Slope | 25 – 32 mV/decade |
| Selection Coefficient | Fe3+ = 0.1, Fe2+, Zn2+= 1, Sr2+ = 50
Ni2+, Cu2+ = 70, Co2+ = 350 Mn2+ = 500, Mg2+ = 1,000 Na+, K+, Ba2+, NH4+ = over 1000 |
| Package Contents |
2 pcs. Calcium Ion Electrode Tips 1000 mg/L Calcium Ion Standard Solution (50ml) 100 mg/L Calcium Ion Standard Solution (50ml) Calcium Ionic Strength Adjustor (50ml) Calcium Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Manual |
| Accessories and Solutions | |
| 7683S | Calcium Ion Electrode Tip |
| 500-CA-IFS | Calcium Ion Electrode Filling Solution (500ml) |
| 500-CA-SL | 100 mg/L Calcium Ion Standard Solution (500ml) |
| 500-CA-SH | 1000 mg/L Calcium Ion Standard Solution (500ml) |
| 500-CA-ISA | Calcium Ionic Strength Adjustor (500ml) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Test Tube Racks, Polypropylene 40 Holes for 20 mm Tubes Laboratory Type
From AUD 8.90 (Ex GST)
PTFE Oval Stir Bars, For Round Bottom Flasks, L10 to L40 Sizes
From AUD 4.50 (Ex GST)
Concave Mirrors, 50 mm Diameter Classroom Optics Range
From AUD 3.50 (Ex GST)
Measuring Jugs, Polypropylene, Reusable, Heat-Resistant, Lightweight, High Quality
From AUD 2.50 (Ex GST)
Taste Test Paper Strips, Genetic Response Laboratory Type
From AUD 7.50 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
AUD 214.50(Ex GST)
Adam Core CQT Compact Lab Balances, 0.01g to 1g Readability
From AUD 250.00 (Ex GST)
I-Gauge with BeeSpi V for Height, Speed and Impact Experiments
AUD 610.50(Ex GST)
You May Also Need
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Conductivity Sensor, 0 µS/cm to 199.9 mS/cm Measurement Range
AUD 143.00(Ex GST)
Digital pH Pen Meters, 0 to 14 pH
From AUD 34.90 (Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab