Motors, Motion and Mechanics
16 V Belt-Driven Motor/Generator Set
- Two DC motors, permanent magnet fields, belt-coupled via pulleys
- One runs as motor, one as generator, direct energy conversion demo
- Efficiency measured by comparing motor input and generator output energy
- Typical operation around 6 V DC, maximum 16 V specified
- Belt removable, motors usable separately for mechanical experiments
$73.00 (Ex GST)
Air Track and Air Table Spark Generator, 240 V AC Mains
- Spark recording timer for linear air tracks, measures motion without photogates, permanent tape record.
- Two spark outputs, rate adjustable 2.5–50 sparks per second for controlled timing intervals.
- Electrode on gliders sparks across gap to tape, leaving black dots as position markers.
- Dot spacing enables velocity and acceleration calculations using measured distances and known spark rate.
- High-voltage cable pair supplied for connection to air track spark rails and recording setup.
$747.00 (Ex GST)
Air Track Spark Generator Cables, Precision Connection Set
- Spark generator cable accessories for air track spark recording systems, supports reliable connection and controlled operation
- Remote control cable includes press button for start and stop, supports safer bench use by keeping hands away from main unit
- EHV cable pair connects spark tracks to spark generator, supports proper delivery of high voltage to the track electrodes
- Earth cable uses 4 mm banana plugs to connect between air track and spark generator, supports stable earthing connection
- Replacement cables help maintain spark recording performance, confirm compatibility with existing spark generator sockets and track hardware before use
From $9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
ASEP Small Motor and Generator Kit with Pulley Included
- Single small DC motor with two-step pulley fitted
- Bench clamp mounting, pulley overhang for cord winding
- Lifts weight to compare electrical input vs mechanical output work
- Falling weight drives generator mode, kinetic energy to electrical output
- Supports potential and kinetic energy discussion with measurable work
$58.00 (Ex GST)
Decision Reaction Timer Device for Response Time Testing
- Random delay 10–90 s, unpredictable start, reduces anticipation bias in reaction time measurement.
- Large LED red or green plus beeper, selectable LED only, sound only, or both.
- Single decision mode, press on cue, dual decision mode, choose correct button by colour.
- Start by operator or self-start button, supports paired testing or individual practice sessions.
- Two press buttons with 1 m cables, can mount to block, requires 12 V supply and external timer.
$207.90 (Ex GST)
Electric Clinostat on Stand, 4 rev/hour, 240 V AC
- Electric clinostat on stand for seed and shoot growth study, slow rotation for controlled observation.
- Rugged motor rotates at 4 rev/hour, turns sponge platform under transparent protective cover.
- Plants and shoots pin to sponge surface, cover removes easily for spraying water and maintenance.
- Rotation helps even light distribution and reduces one-direction sag from gravity during growth monitoring.
- Runs on 220/240 V mains, supplied with removable mains cable for classroom and lab use.
$176.00 (Ex GST)
Hydro Electric Power Demonstration Set, Educational Energy Conversion Demonstrator
- Demonstration set supports hydro-electric power and energy conversion teaching
- Main unit helps show renewable energy principles in practical lessons
- Spare belt option supports ongoing use and replacement needs
- Belt diameter is stated as approximately 70 mm
- Suitable for supervised laboratory and educational demonstration use
From $9.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Motor and Generator Teaching Kits, Classroom Energy Transfer Demonstration Range
- Rebuildable motor construction kit for repeated assembly and dismantling, suited to classroom investigation of motor components
- Electric motor model demonstrates voltage and magnet polarity effects, runs on 6V DC via 4mm sockets
- Large hand driven AC/DC motor generator for energy transfer demonstrations, supports practical experiments without mains power
- Sturdy build focus stated, designed for frequent student handling in laboratories and educational environments under supervision
- Includes compact models and larger generator format, covers motor fundamentals, rotation observation and generator output concepts
From $31.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
- Powerful motor drive units with pulley output, drives belts for mechanical devices and classroom demonstrations
- Variable speed control provides smooth adjustment from almost stopped to about 3000 revolutions per minute
- Low voltage model runs up to 12V AC or DC, powered by plug pack or banana sockets from classroom supply
- Mains model runs on 240V AC and includes side mounted on off switch for controlled operation
- Rectangular housing designed for stability, can be clamped or strapped to bench, held by bands or added weight
From $176.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Simple Clinometer (Inclinometer) for Angle Measurement
- Simple inclinometer clinometer for measuring incline or decline angle from observer to target object.
- Viewing tube and sight opening, centre target to set reference line for angle measurement.
- Button release activates swinging pendulum, graduated in degrees for direct readout.
- Allow brief stabilisation, then release button to clamp pendulum firmly for accurate reading.
- Fast angle measurement tool for fieldwork, slope demonstrations, and basic mechanics teaching tasks.
$55.00 (Ex GST)
U-Shaped Photogate Sensor with Support Rod, General Purpose
- Red LED beam-break detection, universal photogate sensor for motion timing tasks.
- 12 V AC or DC LED power requirement, compatible with IEC electronic timers.
- Air track adaptor option, gate clicks to track edge, gliders pass through cleanly.
- Genius timer cable system, one lead carries LED power and signal return together.
- Two-gate capability on Genius timer, supports dual-point timing and pass-through measurements.
$126.00 (Ex GST)
Vacuum Base Surface Plate for Demonstrations ,Dia. 200 mm
- Flat vacuum surface plate base for sealing bell jars and similar vessels in vacuum experiments.
- Three small bench pads provide stable support and consistent seating on the work bench.
- Creates a base surface for vacuum chamber setups, supports bell-in-vacuum demonstrations.
- Suitable for general vacuum experiments requiring sealed enclosure under bell jar style vessels.
- Designed as a carry and seal plate for repeatable classroom vacuum demonstrations and setups.
$223.00 (Ex GST)
Variable-Speed Air Pump for Air Track or Air Table, 240 V AC Powe
- Mains-operated variable speed blower for air tracks and air tables, adjustable airflow to suit experiment lift requirements.
- Lower speed operation reduces noise, supports quieter classroom demonstrations and controlled airflow settings.
- Upper-face intake below carry handle reduces floor debris ingestion during routine lab and school use.
- Dual strainer system, one prevents particles entering intake, one prevents debris entering outlet orifice.
- Supplied with flexible hose for straightforward connection to linear air track or air table systems.
$336.00 (Ex GST)
Wind Energy Generator Kit, Classroom Electricity Generation Demonstration Type
- Designed for renewable energy teaching, helping demonstrate how wind motion can be converted into useful electrical output
- Operates on low wind, making it practical for classroom experiments without requiring strong outdoor airflow conditions
- Can be driven by a table fan, supporting simple indoor demonstration of wind-powered generation principles
- Produces current for a motor or lamp, allowing visible observation of energy transfer in action
- Useful for science lessons covering sustainability, alternative energy, and basic electricity generation concepts
$174.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Motors, Motion and Mechanics equipment is designed to support teaching and demonstration of mechanical systems, energy transfer, rotational motion, and applied physics principles in classroom and laboratory environments. This category includes motor and generator kits, belt-driven systems, air track accessories, clinostats, photogates, motion sensors, energy demonstration kits, and experimental apparatus used to study force, motion, work, and energy conversion.
These products enable hands-on experiments covering key topics such as rotational motion, torque, speed control, energy conversion between electrical and mechanical systems, friction reduction, and motion analysis. Motor and generator sets allow students to observe energy transformation principles, while devices such as photogates and timers support measurement of velocity, acceleration, and response time. Equipment like air tracks and air pumps reduce friction for more accurate motion experiments, and demonstration kits such as hydroelectric and wind energy systems help illustrate real-world energy applications in a controlled educational setting.
For quality and compliance reference, IEC 61010-1 is a recognised international standard covering safety requirements for electrical equipment used in laboratory and teaching environments, supporting safe operation of powered devices such as motors, generators, and power modules. ISO 12100 is a current standard related to general principles for machine safety and risk assessment, relevant to equipment involving moving parts and mechanical systems. ISO 13849-1 is also widely referenced for safety-related control systems in machinery, supporting safe design and operation where mechanical motion and control systems are involved. These standards should be referenced only where supported by the manufacturer’s specifications and compliance documentation.
For LabChoice Australia customers, Motors, Motion and Mechanics products provide practical, education-focused solutions for teaching physics through real-world mechanical and energy-based experiments. They support clear understanding of motion, force, and energy principles across schools, universities, and technical training environments.