Polypropylene Aspirator Bottles with Stopcock, 2 L to 20 L
- Polypropylene aspirator bottle range with stopcock
- Available in 2 L, 5 L, 10 L and 20 L capacity options
- Material listed as Polypropylene
- Autoclavable format listed
- 5 L option dimensions listed as approximately 360 mm high × 165 mm wide
- 10 L option dimensions listed as 480 mm high × 620 mm diameter
- 5 L option brand listed as Polylab
- Stopcock supports controlled liquid release
- Suitable for settling, decanting and liquid collection workflows
- Confirm capacity, dimensions, stopcock fit and autoclaving conditions before use
From AUD 64.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Coplin Staining Jar with Screw Cap
- Polypropylene Coplin staining jar designed for reliable microscope slide staining and preparation tasks
- Supplied with a secure screw cap lid to help cover contents during staining procedures
- Holds up to 5 standard microscope slides for small-batch processing
- White colour provides a clean, professional laboratory appearance
- Height with lid on is 120 mm for compact bench use
- Base width is stated as 60 mm for stable placement
- Suitable for laboratory, teaching, and educational microscopy workflows
AUD 5.50 (Ex GST)
Polypropylene Cuvette Rack 10mm, 16 Place
- Polypropylene cuvette rack for laboratory and educational use
- Holds 16 cuvettes in a compact bench format
- Designed for 10 mm cuvette handling workflows
- Hole diameter stated as approximately 13 mm
- Overall dimensions stated as 210 × 70 × 35 mm
- Supports organised cuvette storage during testing and preparation
- Suitable for spectrophotometry and classroom laboratory workflows
AUD 14.90 (Ex GST)
Polypropylene Double Separatory Funnel Holder
- Double funnel holder supports two compatible funnels at the same time
- Suitable for funnels with 25 to 152 mm top diameter using adapter rings
- Non-corrosive Polypropylene construction supports routine laboratory use
- Clamp fits standard 12.5 mm support rods for stable mounting
- Includes adapter for narrower 9.5 mm support rods
- Supplied with bushings for 12.5 mm and 9.5 mm rod compatibility
- Rugged, easy-to-clean design supports practical filtration and liquid handling setups
AUD 16.50 (Ex GST)
Polypropylene Filling Funnel, Burette and Barometer Tube Filling
- Small polypropylene funnel for barometer or burette filling
- Ideal for filling burettes as listed
- Funnel diameter listed as 28 mm
- Stem length listed as 30 mm
- Compact design for controlled liquid transfer
- Useful for school, university and teaching laboratory use
- Suitable for compatible laboratory filling applications
- Helps reduce spills during careful filling procedures
- Lightweight plastic construction for routine lab handling
- Confirm chemical compatibility before use
- Funnel only, burette and barometer are not included
- Use under appropriate laboratory or educational supervision
AUD 6.50 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
- Polypropylene filter funnels for laboratory liquid transfer and filtration
- Available in 50 mm, 75 mm, 100 mm and 150 mm diameters
- 50 mm option includes 45 mm stem and 7.4 g weight
- 75 mm option includes 70 mm stem and 7.6 mm stem ID
- 100 mm option includes 85 mm stem and 10 mm stem OD
- 150 mm option includes 110 mm stem and 240 mm overall height
- Suitable for laboratory and educational use under supervision
From AUD 1.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Funnel for Liquid Transfer
- Polypropylene funnel for liquid transfer applications
- Suitable for laboratory, industrial and educational use
- Wide mouth design supports easier pouring
- Wide stem supports faster liquid flow as listed
- Designed for filling carboys, drums and barrels
- Integrated handle supports easier handling
- Available in 200 mm and 250 mm sizes as listed
- Polypropylene construction supports broad chemical compatibility
- Helps reduce spills during approved transfer procedures
- Useful for wash-up, preparation and liquid handling areas
- Confirm chemical compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 22.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Horizontal Pipette Stand, Holds 12
- Horizontal pipette stand for laboratory pipette storage
- Holds up to 12 pipettes
- Suitable for pipettes up to 10 mm diameter
- Polypropylene construction
- Helps keep pipettes organised and accessible on the bench
- Horizontal format supports practical storage during routine laboratory work
- Suitable for school, university and general laboratory environments
- Useful for glass and compatible plastic pipettes
- Confirm pipette diameter, length and cleaning method before use
- For laboratory or educational use only under appropriate supervision
AUD 14.90 (Ex GST)
Polypropylene Micro Tube Rack, 20 Place, 1.5 mL
- Polypropylene micro tube rack for laboratory and educational use
- Holds 20 micro tubes
- Suitable for 1.5 mL micro tubes
- Useful for sample organisation and bench handling
- Compact format for routine laboratory workflows
- Suitable for biology, chemistry and general science practicals
- Helps keep micro tubes upright and accessible during use
- Practical for teaching laboratories, sample preparation and storage
- Confirm tube size and cleaning method before use
- Use under appropriate laboratory or educational supervision
AUD 12.29 (Ex GST)
Polypropylene Microcentrifuge Tubes, Non-Sterile Conical Bottom
- Clear conical micro centrifuge tubes for routine laboratory sample handling
- Available in 0.6 mL and 1.5 mL volume options
- Made from USP VI grade polypropylene, free from heavy metals
- Non-sterile format supplied in pack and case quantities
- RCF rating listed as 30,000 × g
- Safelock cap design supports secure lid sealing
- Clear graduations and frosted marking area support sample identification
- DNase/RNase free with endotoxin level listed as less than 0.1 EU
- Autoclavable for compatible laboratory workflows
From AUD 31.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Microcentrifuge Tubes, Non-Sterile Round Bottom
- Clear polypropylene microcentrifuge tubes for routine laboratory sample handling
- 2.0 mL volume with round bottom design
- Non-sterile format supplied in pack and case quantities
- Made from USP VI grade polypropylene, free from heavy metals
- RCF rating listed as 30,000 × g
- Safelock cap design supports secure lid sealing
- Clear graduations and frosted marking area support sample identification
- DNase/RNase free with endotoxin level listed as less than 0.1 EU
- Autoclavable for compatible laboratory workflows
From AUD 27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Nessler Cylinder Rack for 6 × 50 mL Cylinders
- Rack designed for compatible 50 mL Nessler cylinders used in laboratory testing and analysis
- Holds 6 × 50 mL cylinders in an organised, upright format for efficient workflow management
- Hole diameter stated as 27 mm to accommodate standard cylinder sizes
- Made from polypropylene for lightweight, durable and corrosion-resistant laboratory handling
- Suitable for routine colour comparison, water testing and sample holding workflows
- Helps maintain stability and reduce risk of tipping during use
- Product code supplied: 220010 for easy identification and ordering
- Confirm cylinder diameter, fit and operating conditions before use to ensure compatibility and safety
AUD 13.90 (Ex GST)
Polypropylene Policeman Stirring Rods, 245 × 6 mm, Pack of 12
- Polypropylene stirring rods for laboratory use
- Policeman type design with flattened ends
- Functions as both a stirrer and small spatula
- Rod diameter listed as 6 mm
- Length listed as 245 mm
- Supplied as a pack of 12 pieces
- Useful for stirring, mixing and scraping compatible samples
- Suitable for school, university and general laboratory workflows
- Confirm chemical and temperature compatibility before use
- Use under appropriate laboratory or educational supervision
AUD 17.50 (Ex GST)
Polypropylene Powder Funnel with Parallel Stem, Autoclavable at 121°C
- Polypropylene powder funnels for transferring powders, granules and dry materials
- Parallel stem design supports controlled loading into compatible bottles and flasks
- Available funnel diameters include 65 mm, 80 mm, 100 mm and 150 mm
- Short stem lengths support practical pouring and help reduce transfer obstruction
- 65 mm option includes a stated 17.5 mm neck diameter for compatibility checking
- Autoclavable at 121°C for suitable laboratory cleaning and reuse procedures
- Suitable for laboratory and educational use under appropriate supervision
From AUD 1.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Rack Float 16 Place for 1.5 mL Tubes
- Floating rack designed for use with compatible 1.5 mL microcentrifuge tube formats in laboratory environments
- 16-place capacity supports organised, efficient handling of multiple samples simultaneously
- Constructed from durable polypropylene for lightweight handling and general chemical resistance
- Suitable for routine sample holding, preparation, and temperature-related workflows
- Designed for use in water baths or similar liquid environments requiring floating tube support
- Helps maintain tube stability and positioning during incubation or processing steps
- Product code supplied: 240000 for easy identification and ordering
- Users should confirm tube compatibility, bath medium suitability, and operating conditions prior to use
AUD 34.90 (Ex GST)
Polypropylene Rotatable Multi Rack for Laboratory Tubes and Vials
- Rotatable multi rack for laboratory tubes and vials
- Moulded in polypropylene as listed
- Autoclavable rack as listed
- Combination of 4 modules for different tube sizes
- Modules can be rotated in different directions
- Designed for easy access without relocating the rack
- Holds 2 × 50 mL tubes as listed
- Holds 8 × 15 mL tubes as listed
- Holds 6 × 20 mm tubes as listed
- Holds 10 × 12 mm tubes as listed
- Confirm tube diameter and fit before use
- Use under appropriate laboratory or educational supervision
AUD 99.90 (Ex GST)
Polypropylene Screw Caps for Thermometer Inlet Adapters
- Replacement plastic screw caps for thermometer inlet adapters
- Compatible with 14/20, 19/22 and 24/40 thermometer inlet adapters
- One cap size listed to fit all stated adapter sizes
- Made from durable polypropylene, also known as PP
- Suitable for standard laboratory applications
- Available in 3 pack, 5 pack and 10 pack options
- Useful for replacement, stocking and routine laboratory maintenance
- Not intended for high-temperature use
- Recommended long-term operating range is below 80 to 100°C
- Confirm adapter fit and temperature conditions before use
- Caps only, thermometer inlet adapters are not included
- Use under appropriate laboratory or educational supervision
Polypropylene Test Tube Rack and Drain, Open Rack Design
- Combination test tube support rack and drying rack
- Made from high density filled polypropylene as listed
- Designed to resist floating in water during washing applications
- Suitable for general laboratory work
- Suitable for high temperature washing as listed
- Suitable for autoclaving applications as listed
- Available for 10 mm, 16 mm and 25 mm diameter tubes
- 10 mm option holds 8 test tubes as listed
- 25 mm option holds 8 test tubes as listed
- 16 mm tube quantity should be confirmed before catalogue upload
- Useful for holding and draining compatible test tubes
- Use under appropriate laboratory or educational supervision
From AUD 25.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Test Tube Rack with Pegs, 6 Place for 25 mm Tubes
- Polypropylene test tube rack for laboratory and educational use
- Holds 6 test tubes
- Suitable for 25 mm diameter tubes
- Minimum tube height listed as 90 mm
- Includes drying pegs
- Simple assembly required
- Overall dimensions listed as 240 × 70 × 90 mm
- Useful for holding, organising and drying compatible test tubes
- Suitable for school science, chemistry and biology laboratories
- Use under appropriate laboratory or educational supervision
AUD 4.88 (Ex GST)
Polypropylene Thermometer Rack, 25 Place
- Thermometer rack for safe laboratory thermometer storage
- Holds up to 25 thermometers
- Helps store thermometers upright and organised
- Designed to help reduce risk of thermometer column separation
- Polypropylene construction as listed
- Rack dimensions listed as 140 × 210 × 255 mm
- Hole diameter listed as 7.7 mm
- Suitable for thermometers up to 6 mm diameter
- Suitable for thermometers up to 600 mm high
- Practical storage accessory for school and teaching laboratories
- Thermometer rack only, thermometers are not included
- Use under appropriate laboratory or educational supervision
AUD 87.50 (Ex GST)
Polypropylene Utility Tray for Laboratory Storage and Handling
- Utility tray for laboratory storage and handling
- Moulded in polypropylene as listed
- Brand listed as Polylab
- Autoclavable tray as listed
- Suitable for organising laboratory materials and apparatus
- Useful for drying compatible glassware and labware
- Helps contain minor spills during approved laboratory use
- Helps protect bench surfaces during routine handling
- Available in 375 × 330 × 130 mm and 540 × 435 × 130 mm sizes
- Approximate size variance listed as 5%
- Confirm chemical and autoclave compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 44.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Watch Glass, 75 mm Laboratory Cover Pack of 10
- Polypropylene watch glass style covers for routine laboratory and classroom use
- 75 mm diameter supports use with compatible beakers and containers
- Lightweight plastic construction supports practical bench handling
- Suitable for use as a simple beaker cover or sample covering accessory
- Helps support cleaner bench work during preparation and handling tasks
- Pack of 10 supports classroom, preparation room and laboratory stock use
- Reusable design suits everyday laboratory covering applications
AUD 9.90 (Ex GST)
Polystyrene Weigh Boats, Non Graduated Pack of 250
- Disposable weigh boats for laboratory weighing and sample handling
- Manufactured from high impact polystyrene
- Suitable for handling compatible liquids and solids
- Available capacities include 7 mL, 30 mL, 100 mL and 250 mL
- Pack size listed as 250 pieces
- Rounded corners support easier sample removal
- Corner recesses support controlled pour-off
- Flat bottom design helps improve stability and reduce tipping
- Suitable for exposure to compatible diluted acids, alcohols, bases and aqueous solutions
- Non-graduated, antistatic and non-sterile
- Confirm chemical compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pond and Stream Water Sampler Kit with Dippers and Tubes
- Water sampling kit for pond and stream study
- Designed to collect water samples containing plant, animal and mineral specimens
- Set contains 2 dippers as listed
- Includes 10 sample tubes as listed
- Dippers are over half a metre long as listed
- Suitable for freshwater sampling and environmental fieldwork
- Useful for biology, ecology and water study activities
- Practical kit for school, university and teaching laboratory use
- Supports sample collection for classroom observation
- Confirm sampling location, permissions and fieldwork method before use
- Sampler kit only, microscope and analysis equipment are not included
- Use under appropriate laboratory, fieldwork or educational supervision
AUD 80.90 (Ex GST)
Porcelain Combustion Boats, Heavy Duty Unglazed, Pack of 100
- Unglazed porcelain combustion boats for laboratory chemical analysis work
- Supplied as pack of 100 pieces for routine laboratory stock control
- Porcelain construction supports high heat resistance during suitable heating procedures
- Boat weight helps keep the sample boat steady during analytical processes
- Suitable for heating, combustion analysis, sample holding and preparation tasks
- Pack details are stated as 90 × 70 × 160 mm with pack weight of 0.68 kg
- Listed sizes are approximate and may vary due to manufacturing shrinkage
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Porcelain Crucible Shelf Rack 160 × 100 mm
- Porcelain crucible shelf for organised holding of compatible laboratory crucibles
- Size C190 with stated dimensions of 160 × 100 mm
- Holds six crucibles in total for practical bench or heating setup organisation
- Designed to hold 2 small, 2 medium and 2 large crucibles
- Suitable for compatible crucibles from 5 mL to 50 mL
- Supports stable arrangement of crucibles during laboratory preparation workflows
- Suitable for laboratory and educational use under appropriate supervision
AUD 18.90 (Ex GST)
Porcelain Evaporating Basins, Round Bottom with Spout, 15 mL to 1000 mL
- Porcelain round bottom evaporating basins for routine laboratory and educational use
- Pouring spout supports controlled transfer and decanting of compatible liquids
- Wide capacity range from 15 mL to 1000 mL supports small to larger-volume workflows
- Round bottom profile supports practical sample handling during routine bench work
- 15 mL model C46-1 has 47 mm rim diameter and 20 mm height
- Suitable for evaporation, sample preparation, liquid handling and teaching practicals
- For laboratory or educational settings only, use under appropriate supervision
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Porcelain Streak Plates, Unglazed Mineral Testing Tile Range, White & Black
- Unglazed porcelain streak plates for mineral streak testing and identification work
- Suitable for geology practicals, classroom mineral testing and specimen observation
- Compact 1 × 2 inch tile size suits classroom kits, field sets and bench testing
- Supplied in packs of 10 to support class distribution and repeated practical use
- White and black plate options support improved contrast when observing streak colour
- Useful for comparing mineral streak colour against surface appearance
- For laboratory or educational use only, use under appropriate supervision
From AUD 17.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Portable Bunsen Burner Adapter, Brass Canister
- Adapter designed specifically for older style Porta-Gaz Bunsen burners used in laboratories
- Converts compatible burners for use with modern self-sealing gas canisters
- Manufactured from durable brass for reliable, long-term laboratory use
- Ideal for maintaining and extending the life of existing portable burner equipment
- Supplied as adapter only; burner and gas canister must be purchased separately
- Suitable for laboratory or educational use under appropriate supervision and safety procedures
AUD 19.50 (Ex GST)
Portable Bunsen Burner for Self-Sealing Gas Canister
- Portable Bunsen burner designed for laboratory and educational heating, flame demonstration and supervised practical work
- Suitable for connection with a C250 self-sealing gas canister, supporting convenient portable use where fixed gas lines are not available
- Adjustable air intake seal ring helps control flame hardness, flame intensity and operating temperature during heating tasks
- Durable brass tube construction supports repeated use in teaching, laboratory and workshop-style practical environments
- Features a 7/16 inch screw thread connection for compatible gas cartridge attachment
- Compact burner size of approximately 9 × 7 × 3 cm, making it easy to handle, store and transport for supervised use
AUD 49.90 (Ex GST)
Portable Turbidity Meter Kit, ISO 7027, GLP Data Logger and TruRead Mode
- Portable turbidity meter kit for professional water-quality turbidity measurement workflows
- Listed as ISO 7027 compliant using infrared light source and 90° scattering method
- Infrared light source is especially useful for testing coloured sample solutions
- TruRead mode calculates average, minimum and maximum values from multiple readings
- Includes AMCO turbidity standards, sample vials, USB cable, silicone oil and accessories
- 200 data set storage with USB output supports GLP-style data management
Portable Turbidity Meter Kit, ISO 7027, with Carry Case and Calibration Solution
- Portable turbidity meter kit for field and laboratory water-quality testing workflows
- ISO 7027 compliant infrared light source with 90° nephelometric measurement method
- Measures turbidity from 0 to 1000 NTU with accuracy listed as ±1% or 0.02 NTU, whichever is greater
- Large colour TFT display provides graphic and text operation guidance
- Supplied with polymer turbidity calibration standards for routine meter calibration
- CE certified meter with 2-year warranty as listed in the supplied product information
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.