Biology Charts, Science Teaching Reference Posters
• Plastic biology teaching charts for classroom display, size specified 50 cm x 66 cm across the range
• Topics listed include cell membrane, ear, heart structure and kidney, supports anatomy and biology curriculum teaching
• Large format wall chart style supports quick reference during practicals, revision sessions and lab demonstrations
• Consistent chart sizing helps standardise classroom resources and storage, suitable for schools and training rooms
• For laboratory or educational settings only, display under supervision and store flat or rolled to protect the plastic surface
From AUD 93.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bird Drinking Heat Thermodynamics Demonstration
- Drinking bird apparatus for heat and thermodynamics demonstrations
- Demonstrates evaporative cooling and vapour pressure change
- Shows energy transfer using a visible tipping motion
- Useful for explaining evaporation, condensation and pressure difference
- Head cooling occurs as water evaporates from the bird’s fuzzy head
- Vapour pressure difference causes the liquid to move and the bird to tip
- Suitable for classroom physics and science demonstrations
- Useful for heat, energy and phase-change teaching activities
- Contains methylene chloride vapour as listed in the supplied explanation
- Handle carefully as a sealed demonstration apparatus
- Do not break, heat, puncture or modify the unit
- Use under appropriate laboratory or educational supervision
AUD 18.90 (Ex GST)
Black Bars for Universal Attachments for Shakers
- Black accessory bars for compatible universal shaker attachments
- Suitable for selected universal shaker attachment systems
- Designed for use with matching universal attachment setups
- Black finish supports clear accessory identification
- Helps users select replacement or matching bars based on attachment type
- Suitable for compatible shaker flask holding attachment workflows
- Confirm attachment fit and shaker setup compatibility before use
Block for Cuvettes
- 18 x 10 mm square cuvette capacity supports dry block heater workflows
- Chemical-resistant black anodised finish suits routine block heater use
- L95 x W75 x H50 mm block dimensions support compatible heater placement
- Black anodised aluminium construction supports rapid block heat transfer
- Designed to fit many other dry block heater brands for flexible lab use
- Also known as dry bath block, constant temperature block, or cuvette block
AUD 392.00 (Ex GST)
Block for Epp Tubes
- Fits 1.5 mL, 0.5 mL and 0.2 mL Epp tube heating workflows
- 20, 30 and 48 hole formats support different sample capacities
- Tapered hole base supports suitable tube fit in each block format
- Black anodised aluminium construction supports rapid heat transfer
- Thermometer reference hole included for temperature reference use
- L95 x W75 x H50 mm block size suits compatible dry block heaters
From AUD 255.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Block for Falcon Tubes
- Fits 15 mL and 50 mL Falcon tube heating workflows
- 12 hole and 4 hole formats support different tube capacities
- Conical hole base supports suitable Falcon tube placement
- Black anodised aluminium construction supports rapid heat transfer
- Thermometer reference hole included for temperature reference use
- Evaporation manifolds available to suit compatible applications
From AUD 255.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Blue Nitrile Gloves, Powder Free Disposable Safety Gloves for Hand Protection
- Blue nitrile gloves, powder free design for clean and low-residue handling
- Suitable for laboratory, cleaning, inspection, and general workplace tasks
- Nitrile material offers a durable alternative to natural latex gloves
- Powder free finish helps reduce surface contamination on samples and equipment
- Blue colour improves visibility and supports easy glove change checks
From AUD 9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Blued Steel Tuning Forks, Sound and Vibration Demonstration Range
- Blued steel tuning forks for sound and vibration demonstration work
- Frequency options span low C 128 Hz to upper C 512 Hz
- Suitable for use with stroboscopes, mirrors, water, and ping pong balls
- Can also support demonstrations with oscilloscopes and lasers
- Uniform fork dimensions support consistent classroom and laboratory handling
From AUD 7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask Flat Bottom, Socket Joint, Short Neck, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Flat base ensures stable heating on hotplates
- Socket joint allows secure glassware connections
- Short neck saves space in compact lab setups
- Ideal for distillation, reflux, and chemical reactions
- Used in teaching, research, and pharmaceutical labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 8.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask Round Bottom Four Neck Jointed BORO 3.3 Glass
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High clarity BORO 3.3 glass supports stable, even heating for reaction work
- Four jointed necks allow simultaneous addition, monitoring and gas handling
- Secure ground joints ensure leak resistant connections with lab apparatus
- Excellent chemical and thermal resistance for synthesis, reflux and distillation
- Trusted in research labs and universities for multi step experimental workflows
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 35.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask Round Bottom, Socket Joint, Short Neck, Borosilicate Glass (BORO 3.3)
- Round bottom boiling flask for heating, boiling and reaction workflows
- Short neck design supports compact glassware assembly setups
- Socket joint connection for use with compatible jointed glassware
- Made from BORO 3.3 borosilicate glass for laboratory use
- Suitable for controlled heating applications in chemistry laboratories
- Smooth round bottom shape supports even heat distribution during boiling
- Clear glass construction allows easy visual monitoring of contents
- Practical choice for distillation, reflux and general laboratory heating setups
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask, Flat Bottom, Borosilicate Glass (BORO 3.3)
- Flat bottom ensures stable placement on surfaces
- Designed for uniform heating and boiling tasks
- Ideal for distillation, reflux, and sample prep
- Used in chemistry labs, schools, and industry
- Preferred for durability and thermal resistance
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask, Round Bottom, Borosilicate Glass (BORO 3.3)
- Round bottom supports uniform heating distribution
- Ideal for distillation, reflux, and chemical synthesis
- Requires support ring or heating mantle for use
- Used in organic chemistry, teaching, and research
- Trusted by laboratories across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Borosilicate Gas Jars with Ground Flange
- Gas jar range for laboratory and educational use
- Made from borosilicate glass
- Designed for collecting gas from experiments
- Ground flange supports use with compatible gas jar covers
- Available in 15 × 5 cm and 20 × 5 cm size options
- Suitable for school chemistry and general science demonstrations
- Useful for gas collection, observation and temporary containment activities
- Clear glass supports visibility during experiments
- Confirm cover fit, gas compatibility and experiment method before use
- Use under appropriate laboratory or teacher supervision
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Borosilicate Glass Crystallizing Dishes with Spout
- Borosilicate glass crystallizing dish range with spout
- Wide diameter and short height support faster solution evaporation
- Suitable for recrystallization and crystal growth observation
- Available in 90 mm, 100 mm, 125 mm, 150 mm and 230 mm diameter options
- 125 mm option takes 500 mL of liquid
- 150 mm option has 750 mL capacity
- 230 mm option has 3500 mL capacity
- 230 mm option is listed as 3.3 boro glass with approximate maximum temperature of 500°C
- Not generally intended for complete evaporation of solutions
- Use under appropriate laboratory or educational supervision
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Borosilicate Side Arm Test Tubes, Laboratory Filtration Range
- Borosilicate glass side arm test tubes for laboratory filtration applications
- Multiple size options support selection by length and diameter requirement
- Side arm format suits connected filtration and related bench setups
- Sizes range from compact 150 x 18 mm to 200 x 25 mm
- Glass construction supports routine laboratory handling and practical use
From AUD 4.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
- Securely connects clamps to lab rods and stands
- Heavy-duty build for high stability under load
- Powder-coated finish resists corrosion and wear
- Compatible with most standard lab apparatus
- Used in physics, chemistry, and teaching setups
- Made from durable alloy – Long service life
From AUD 6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
- 360° rotatable boss head clamp for laboratory stand setups
- Zinc bosshead design as listed
- Suitable for retort stands and other compatible laboratory stands
- Allows attached items to be positioned at different angles
- Knob tightens to lock the selected position
- Useful for supporting compatible clamps and accessories
- Can assist with positioning burettes, thermometers and glassware
- Easy to assemble and disassemble as listed
- Robust and durable construction as listed
- Practical accessory for school, university and research laboratories
- Confirm rod size, clamp fit and load suitability before use
- Use under appropriate laboratory or educational supervision
AUD 26.90 (Ex GST)
Boss Head Clamp, Jumbo Heavy Duty for up to 25 mm Rod
- Boss Head Clamp, Jumbo Heavy Duty for laboratory support assemblies
- Heavy-duty design for larger retort stand setups
- Made from die-cast iron as listed
- Painted black finish as listed
- Screw and block style connection for secure clamping
- Holds rods up to 25 mm as listed
- Suitable for retort stands and condenser clamps
- Useful for supporting compatible laboratory apparatus
- Practical clamp holder for chemistry and general science setups
- Confirm rod diameter and clamp compatibility before use
- Do not overload the bosshead or support stand
- Use under appropriate laboratory or educational supervision
AUD 36.90 (Ex GST)
Bosshead, Square Aluminium with Screw for up to 16 mm Rod
- Square bosshead for retort stand and clamp assemblies
- Suitable for use with retort stands and condenser clamps
- Made from heavy-duty die-cast aluminium as listed
- Painted finish as listed
- Screw and block style connection for secure clamping
- Holds rods up to 16 mm as listed
- Useful for supporting compatible laboratory apparatus
- Suitable for school, university and teaching laboratories
- Practical accessory for chemistry and general science setups
- Confirm rod size and clamp compatibility before use
- Do not overload the bosshead or support stand
- Use under appropriate laboratory or educational supervision
AUD 11.90 (Ex GST)
Bosshead, Zinc Powder-Coated with Screw, Holds up to 16 mm Rod
- Zinc powder coated bosshead for laboratory support setups
- Designed for use with retort stands and support rods
- Fits rods up to 16 mm as listed
- Adjustable screws allow secure positioning
- Provides a strong connection for compatible clamp assemblies
- Useful with condenser clamps and general apparatus supports
- Powder coated finish helps resist corrosion and wear as listed
- Suitable for school, university and teaching laboratories
- Practical accessory for chemistry and general science setups
- Confirm rod diameter and clamp compatibility before use
- Do not overload the bosshead or support stand
- Use under appropriate laboratory or educational supervision
AUD 9.08 (Ex GST)
Botanical Dicot Stem T.S. and L.S. Teaching Model, Sunflower
- Botanical teaching model for dicot stem study
- Represents sunflower dicot stem structure
- Shows transverse section and longitudinal section views
- Suitable for plant anatomy and botany demonstrations
- Useful for comparing internal stem tissue organisation
- Supports classroom teaching of dicot stem features
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratory use
- Supplied as the teaching model only
- Use under appropriate laboratory or educational supervision
AUD 249.50 (Ex GST)
Botanical Leaf Anatomy Teaching Model
- Botanical teaching model for leaf anatomy study
- Suitable for plant biology and botany demonstrations
- Helps students visualise internal leaf structure
- Useful for teaching plant tissue organisation
- Size listed as approximately 250 × 300 mm
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratory use
- Supports classroom discussion alongside diagrams and microscope work
- Supplied as the leaf anatomy teaching model only
- Use under appropriate laboratory or educational supervision
AUD 249.50 (Ex GST)
Botanical Monocot Stem T.S. Teaching Model
- Botanical teaching model for monocot stem study
- Represents a transverse section of a monocot stem
- Suitable for plant anatomy and botany demonstrations
- Useful for comparing monocot and dicot stem structures
- Supports classroom explanation of stem tissue organisation
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratories
- Helps students understand internal plant stem structure
- Supplied as the teaching model only
- Use under appropriate laboratory or educational supervision
AUD 249.50 (Ex GST)
Botanical Typical Flower Teaching Model, Self Assembly
- Botanical teaching model for typical flower study
- Self assembly format for classroom preparation
- Suitable for plant anatomy and botany demonstrations
- Useful for teaching flower structure and plant reproduction
- Helps students visualise flower parts in a larger model format
- Practical visual aid for biology and general science lessons
- Suitable for school, university and teaching laboratory use
- Supports classroom discussion alongside diagrams and microscope work
- Supplied as the teaching model only
- Use under appropriate laboratory or educational supervision
AUD 99.90 (Ex GST)
Botanical Typical Plant Cell Teaching Model
- Botanical teaching model for typical plant cell study
- Suitable for plant biology and cell structure demonstrations
- Made from PVC material
- Size listed as 42 × 30 × 10 cm
- Net weight listed as 2.1 kg
- Useful for teaching plant cell organisation and structure
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratory use
- Supports classroom discussion alongside diagrams and microscope work
- Supplied as the plant cell model only
AUD 104.90 (Ex GST)
Bottle Top Dispenser with recirculation valve
- Bottle top dispenser with recirculation valve for safer chemical dispensing and reagent recovery
- Springless valve design supports high chemical resistance and long service life
- Recirculation function helps reduce reagent waste during priming and dispensing preparation
- Telescopic filling tube suits bottle heights from 170 mm to 300 mm
- 360° rotating discharge tube allows flexible dispensing into different vessels
- Single-tool recalibration supports easy accuracy adjustment when required
- Ergonomic design helps support low-pressure, controlled dispensing for larger volumes
- Safety locking feature helps minimise accidental spillage during laboratory use
- Suitable for LabChoice Australia chemical dispensing workflows in laboratories, education, and research settings
From AUD 545.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bottle Top Dispenser Without Recirculation Valve
- Bottle top dispenser without recirculation valve for controlled chemical dispensing
- Springless valve design supports high chemical resistance and longer service life
- Telescopic filling tube suits bottle heights from 170 mm to 300 mm
- 360° rotating discharge tube allows convenient dispensing into multiple vessels
- Single-tool recalibration supports easy accuracy adjustment and maintenance
- Ergonomic design helps reduce hand strain during routine laboratory dispensing
- Snap-fit discharge tube and safety locking feature help minimise accidental spillage
- Suitable for LabChoice Australia laboratory chemical handling and liquid dispensing workflows
From AUD 481.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bottle Top Dispensers, Autoclavable Adjustable Volume ISO 8655 Certified
- Research Range bottle-top dispensers for accurate laboratory reagent dispensing
- Available in six adjustable volume ranges from 0.25–2.5 mL to 10–100 mL
- Research models use PTFE, FEP and borosilicate glass in the stated wetted components
- Smooth plunger movement supports controlled dispensing of compatible liquid reagents
- Locking rocker switch allows convenient volume adjustment during laboratory procedures
- Safety discharge system and protective nozzle cap help reduce unintended liquid release
- Standard 30 mm bottle thread with adapter options ranging from 28 mm to 45 mm
- Autoclavable at 121°C and 15 psi, following the manufacturer's disassembly instructions
- Individually calibrated to ISO 8655 requirements, with a calibration certificate supplied
From AUD 518.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bottle Vortex Connector, Tornado and Fluid Dynamics Demonstration
- Vortex tube connector for tornado-in-a-bottle demonstrations
- Designed to join two compatible plastic soda bottles
- Demonstrates swirling vortex formation using water
- Useful for teaching fluid motion and vortex effect
- Supports classroom tornado race activities
- Can be used to compare liquids of different viscosities
- Suitable for school, university and STEM teaching demonstrations
- Simple hands-on apparatus for water and fluid science lessons
- Bottles are not included
- Confirm bottle thread compatibility before use
- Do not over-tighten or use damaged bottles
- Use under appropriate laboratory or educational supervision
AUD 6.50 (Ex GST)
Bottle-Top Dispenser Premium Quality with Glass/PTFE Piston
- Adjustable bottle-top dispenser supports controlled routine reagent handling
- High chemical compatibility from inert materials with glass/PTFE piston construction
- Fully autoclavable at 121°C to support sterile laboratory workflows
- Easy to disassemble and clean for periodic maintenance
- Designed for repeatable liquid dispensing directly from compatible reagent bottles
- Suitable for chemical-resistant dispensing across routine laboratory applications
- Supports accurate reagent transfer for analytical, research and quality-control workflows
From AUD 428.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bottle-Top Dispenser, Autoclavable at 121°C, Chemical-Resistant
- Chemical-resistant bottle-top dispenser supports controlled routine reagent handling
- Inert, high-strength PTFE, FEP, BSG and PP components support reliable chemical compatibility
- Liquid-accessible parts are fully autoclavable at 121°C for contamination-control workflows
- Easy to disassemble and clean for periodic maintenance
- Designed for repeatable dispensing directly from compatible reagent bottles
- Suitable for routine chemical, analytical, research and quality-control applications
- Supports controlled liquid transfer where clean handling and chemical resistance are important
From AUD 265.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.